A new strategy for condition monitoring of adjustable speed induction machine drive systems

2009 IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, SDEMPED 2009

Volumn , Issue , 2009, Pages

  Lee, Sang Bin ^a   Yang, Jinkyu ^a   Hong, Jongman ^a   Kim, Byunghwan ^a   Yoo, Jiyoon ^a   Lee, Kwanghwan ^b   Yun, Jangho ^b   Kim, Myungchul ^c   Lee, Kwangwoon ^d   Wiedenbrug, Ernesto J ^e   Nandi, Subhasis ^f  

^a Korea University   (South Korea)

^b Hyundai Heavy Industries   (South Korea)

^c SAMSUNG Electronics   (South Korea)

^d Mokpo Maritime University   (South Korea)

^e SKF Group   (Netherlands)

^f UNIVERSITY OF VICTORIA   (Canada)

Author keywords

Adjustable speed drive; Broken rotor bar; Capacitance; Condition; Diagnostics; Dissipation factor; Electrolytic capacitor; Equivalent series resistance; High resistance connection; Insulation resistance; Inter laminar insulation failure; Monitoring; Power cable; Stator core; Stator winding insulation

Indexed keywords

ADJUSTABLE SPEED DRIVES; BROKEN ROTOR BAR; CONDITION; DISSIPATION FACTORS; EQUIVALENT SERIES RESISTANCE; HIGH RESISTANCE; HIGH RESISTANCE CONNECTION; INSULATION FAILURES; INSULATION RESISTANCE; POWER CABLES; STATOR CORE; STATOR WINDING;

CABLES; CAPACITANCE; CAPACITORS; ELECTRIC CONNECTORS; ELECTRIC DRIVES; ELECTRIC MACHINE INSULATION; ELECTRIC MACHINERY; ELECTRIC WINDINGS; ELECTROLYTIC CAPACITORS; INDUCTION MOTORS; MOTORS; POWER ELECTRONICS; ROTORS (WINDINGS); SPEED; STATORS; TELECOMMUNICATION CABLES; VARIABLE SPEED DRIVES; WINDING;

CONDITION MONITORING;

EID: 74349111888     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/DEMPED.2009.5292792     Document Type: Conference Paper

References (35)

1. H.A. Toliyat, G.B. Kliman, Handbook of electric motors, 2nd Edition, Marcel Dekker, 2004.
2. G.C. Stone, E.A. Boulter, I. Culbert, and H. Dhirani, Electrical insulation for rotating machines, IEEE Press Series on Power Engineering, John Wiley and Sons, 2004.
3. E. Persson, "Transient effects in application of PWM inverters to induction motors," IEEE Trans. on Ind. Appl., vol. 28, no. 5, pp. 1095-1101, 1992.
4. G. Stone, S. Campbell, S. Tetreault, "Inverter-fed drives: which motors are at risk?," IEEE Ind. Appl. Mag., vol. 6, no. 5, pp. 17-22, 2004.
5. D. Busse, J. Erdman, R.J. Kerkman, D. Schlegel, G. Skibinski, "Bearing currents and their relationship to PWM drives," IEEE Trans. on Power Electr., vol. 12, no. 2, pp. 243-252, 1997. (Pubitemid 127762985)
6. S. Chen, T.A. Lipo, D. Fitzgerald, "Source of induction motor bearing current caused by PWM inverters," IEEE Trans. on Ener. Conv., vol. 11, no. 1, pp. 25-32, 1996.
7. Military Handbook 217F, "Reliability prediction of electronic equipment," Feb. 28, 1995.
8. Washington State Energy Office, Keeping the spark in your electrical system, Oct. 1995.
9. K. Harada, A. Katsuki, and M. Fujiwara, "Use of ESR for deterioration diagnosis of electrolytic capacitor," IEEE Trans. on Power Electr., vol. 8, no. 4, pp. 355-361, Oct. 1993.
10. A. M. Imam, T. G. Habetler, R. G. Harley, and D.M. Divan, "Real-Time Condition Monitoring of the Electrolytic Capacitors for Power Electronics Applications," Proc. of Applied Pwr. Elec. Conf., pp. 1057-1061, 2007.
11. M.L. Gasperi, "Life prediction modeling of bus capacitors in ac variable-frequency drives," IEEE Trans. on Ind. Appl., vol. 41, no. 6, pp. 1430-1435, Nov./Dec. 2005.
12. A. Layhani, P. Venet, G. Grellet, and P.J. Viverge, "Failure prediction of electrolytic capacitors during operation of a switchmode power supply," IEEE Trans. on Power Electr., vol. 13, no. 6, pp. 1199-1207, Nov. 1998.
13. P. Venet, F. Perisse, M.H. El-Husseini, and G. Rojat, "Realization of a smart electrolytic capacitor circuit," IEEE Ind. Appl. Mag., vol. 8, no. 1, pp. 16-20, Jan./Feb. 2002.
14. K. Lee, M. Kim, J. Yoon, S.B. Lee, and J. Yoo, "Condition Monitoring of DC Link Electrolytic Capacitors in Adjustable Speed Drives," IEEE Trans. on Ind. Appl., vol. 44, no. 5, pp. 1606-1613, Sept./Oct. 2008.
15. G.A. McCoy, and J.G. Douglass, Energy management for motor driven systems, Office of Industrial Technologies, U.S. Dept. of Energy, 2000.
16. J. Sletbak, R. Kristensen, H. Sundklakk, G. Navik, and M. Runde, "Glowing contact areas in loose copper wire connections," IEEE Trans. on Comp., Hybrids, and Manufactor. Tech., vol. 15, no. 3, pp. 322-327, June 1992.
17. R.S. Colby, "Detection of high-resistance motor connections using symmetrical component analysis and neural networks," Proc. of IEEE SDEMPED, pp. 2-6, Atlanta, GA, 2003.
18. J. Yoon, J. Yun, S.B. Lee, and E.J. Wiedenbrug, "Automated Monitoring of High-Resistance Connections in the Electrical Distribution System of Industrial Facilities," Proc. of IEEE IAS Ann. Meet., Oct. 2008.
19. IEEE recommended practice for measurement of power factor tip-up of electric machinery stator coil insulation, IEEE Std. 286-2000, 2000.
20. IEEE recommended practice for testing insulation resistance of rotating machinery, IEEE Std. 43-2000, 2000.
21. J. Yang, J. Cho, S.B. Lee, and J. Yoo, "An Advanced Technique for Monitoring the Condition of Stator Winding Groundwall Insulation for Inverter-fed Machines," IEEE Trans. on Ind. Appl., vol. 44, no. 2, pp. 555-564, Mar./Apr. 2008.
22. Can energy efficient motors be wound satisfactorily?, EASA tech. note no. 26, Electrical Apparatus Service Association, Inc, 1999.
23. The effect of repair/rewinding on motor efficiency: EASA/AEMT rewind study and good practice guide to maintain motor efficiency, EASA/AEMT, 2003.
24. Stator core testing, EASA tech. note no. 17, Electrical Apparatus Service Association, Inc, 2002.
25. IEEE standard test procedure for polyphase induction motors and generators, IEEE Standard 112-2004, Nov. 2004.
26. K. Lee, J. Hong, K. Lee, S.B. Lee, and E.J. Wiedenbrug, "A Stator Core Quality Assessment Technique for Inverter-fed Induction Machines," Proc. of IEEE IAS Ann. Meet., Oct. 2008.
27. A. Bellini, F. Filippetti, C. Tassoni, & G.A. Capolino, "Advances in Diagnostics Techniques for Induction Machines," IEEE Trans. on Ind. Elec., vol. 55, no. 12, pp. 4109-4126, Dec. 2008.
28. A. Bellini, F. Filippetti, G. Franceschini, & C. Tassoni, "Closed-loop control impact on the diagnosis of induction motors faults," IEEE Trans. on Ind. Appl., vol. 36, no. 5, pp. 1318-1329, Sept./Oct. 2000.
29. S.M.A. Cruz, & A.J.M. Cardoso, "Diagnosis of rotor faults in closed-loop induction motors drives," proceedings of IEEE IAS Annual Meeting, vol. 5, pp. 2346-2353, 2006.
30. C. Kral, R. Wieser, F. Pirker, & M. Schagginger, "Sequences of field-oriented control for the detection of faulty rotor bars in induction machines-The Vienna monitoring method," IEEE Trans. on Ind. Elec., vol. 47, no. 5, pp. 1042-1050, Oct. 2000.
31. F. Briz, M.W. Degner, A.B. Diez, & J.M. Guerrero, "On-line diagnosis of inverter-fed induction machines using high-frequency signal injection," IEEE Trans. on Ind. Appl., vol. 40, no. 4, pp. 1153-1161, July/Aug. 2004.
32. T. Bishop, "Squirrel cage rotor testing," EASA Convention, 2003.
33. C. Kral, F. Pirker, & G. Pascoli, "Detection of rotor faults in squirrelcage induction machines at standstill for batch tests by means of Vienna monitoring method," IEEE Trans. on Ind. Appl., vol. 38, no. 3, pp. 618-624, May/June 2002.
34. B. Akin, B. Ozturk, H. Toliyat, & M. Rayner, "DSP-based sensorless electric motor fault diagnosis tools for electric and hybrid electric vehicle powertrain applications," IEEE Trans. on Veh. Tech., vol. 58, no. 1, 2009.
35. C. Demian, A. Mpanda-Mabwe, H. Henao, & G.A. Capolino, "Detection of induction machines rotor faults at standstill using signals injection," IEEE Trans. on Ind. Appl., vol. 40, no. 6, pp. 1550-1559, Nov./Dec. 2004.