Phenomenon rotor fault - Multiple electrical rotor asymmetries in induction machines

2009 IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, SDEMPED 2009

Volumn , Issue , 2009, Pages

  Kral, Christian ^a   Kapeller, Hansjörg ^a   Gragger, Johannes V ^a   Haumer, Anton ^a   Kubicek, Bernhard ^a  

^a ARSENAL RESEARCH   (Austria)

Author keywords

Electrical rotor asymmetries; Induction machine; Rotor fault; Simulation model; Skewing

Indexed keywords

BROKEN BAR; BROKEN ROTOR BAR; ELECTRICAL ROTOR ASYMMETRY; END RING; FAULT SIGNATURE; INDUCTION MACHINE ROTOR; INDUCTION MACHINES; MEASUREMENT RESULTS; ROTOR FAULT; SIMULATION MODEL;

ELECTRIC MACHINERY; POWER ELECTRONICS; ROTORS (WINDINGS);

ELECTRIC DRIVES;

EID: 74349095941     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/DEMPED.2009.5292769     Document Type: Conference Paper

References (24)

1. C. Kral, F. Pirker, and G. Pascoli, "The impact of inertia on rotor fault effects - theoretical aspects of the vienna monitoring method," IEEE Transactions on power electronics, vol. 23, No. 4, pp. 2136-2142, 2008.
2. A. Bellini, F. Filippett, C. Tasson, and G.-A. Capolino, "Advances in diagnostic techniques for induction machines," IEEE Transactions On Industrial Electronics, vol. 55, pp. 4109-4126, December 2008.
3. C. Bruzzese, "Analysis and application of particular current signatures (symptoms) for cage monitoring in nonsinusoidally fed motors with high rejection to drive load, inertia, and frequency variations," IEEE Transactions On Industrial Electronics, vol. 55, pp. 4137-4155, December 2008.
4. I. M. Culbert and W. Rhodes, "Using current signature analysis technology to reliably detect cage winding defects in squirrel-cage induction motors," IEEE Transactions on Industry Applications, vol. 43, pp. 422-428, March-april 2007.
5. L. Wu, X. Huang, T. Habetler, and R. Harley, "Eliminating load oscillation effects for rotor eccentricity detection in closed-loop drive-connected induction motors," IEEE Transactions on Power Electronics, vol. 22, pp. 1543-1551, July 2007. (Pubitemid 47098856)
6. I. P. Tsoumas, G. Georgoulas, E. D. Mitronikas, and A. N. Safacas, "Asynchronous machine rotor fault diagnosis technique using complex wavelets," IEEE Transaction on Energy Conversion, vol. 23, pp. 444-459, June 2008.
7. C. Kral, T. G. Habetler, R. G. Harley, F. Pirker, G. Pascoli, H. Oberguggenberger, and C. J. M. Fenz, "A comparison of rotor fault detection techniques with respect to the assessment of fault severity," Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, SDEMPED, pp. 265-270, 2003.
8. F. Pedrayes, C. H. Rojas, M. F. Cabanas, M. G. Melero, G. A. Orcajo, and J. M. Cano, "Application of a dynamic model based on a network of magnetically coupled reluctances to rotor fault diagnosis in induction motors," IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, The 6th, SDEMPED 2007, Cracow, Poland, 2007.
9. J.-H. Jung and B.-H. Kwon, "Corrosion model of a rotor-bar-under-fault progress in induction motors," IEEE Transactions on Industrial Electronics, vol. 53, pp. 1829-1841, Dec. 2006.
10. R. Wieser, C. Kral, F. Pirker, and M. Schagginger, "On-line rotor cage monitoring of inverter-fed induction machines by means of an improved method," IEEE Transactions on Power Electronics, vol. 14, pp. 858-865, September 1999.
11. I. Kerszenbaum and C. F. Landy, "The existence of large inter-bar currents in three phase squirrel cage motors with rotor-bar and/or end-ring faults," IEEE Transaction on Power Apparatus and Systems, vol. PAS-103, pp. 1854-1862, July 1984.
12. G. H. Müller and C. F. Landy, "A novel method to detect broken rotor bars in squirrel cage induction motors when interbar currents are present," IEEE Transactions on Energy Conversion, vol. 18, pp. 71-79, March 2003.
13. R. F.Walliser and C. F. Landy, "Determination of interbar current effects in the detection of broken rotor bars in squirrel cage induction motors," IEEE Transactions on Energy Conversion, pp. 152-158, 1994.
14. G. R. Bossio, C. H. D. Angelo, G. O. Garcia, J. A. Solsona, and M. I. Valla, "Effects of rotor bar and end-ring faults over the signals of a position estimation strategy for induction motors," IEEE Transactions on Industry Applications, vol. 41, pp. 1005-1012, July-August 2005.
15. C. Concari, G. Franceschini, and C. Tassoni, "Differential diagnosis based on multivariable monitoring to assess induction machine rotor conditions," IEEE Transactions On Industrial Electronics, vol. 55, pp. 4156-4166, December 2008.
16. C. Kral, F. Pirker, G. Pascoli, and H. Kapeller, "Robust rotor fault detection by means of the vienna monitoring method and a parameter tracking technique," IEEE Transactions on Industrial Electronics, vol. 55, pp. 4229-4237, December 2008.
17. D. G. Dorrell, P. J. Holik, P. Lombard, H.-J. Thougaard, and F. Jensen, "A multisliced finite-element model for induction machines incorporating interbar current," IEEE Transactions on Industry Applications, vol. 45, no. 1, pp. 131-141, 2009.
18. C. Kral, F. Pirker, and G. Pascoli, "Influence of inertia on general effects of faulty rotor bars and the Vienna Monitoring Method," Conference Proceedings of the IEEE International Symposium on Diagnostics of Electrical Machines, Power Electronics and Drives, SDEMPED, pp. 447-452, 2001.
19. S. Williamson, C. Y. Poh, and A. C. Smith, "Estimation of the inter-bar resistance of a cast cage rotor," IEEE International Electric Machines and Drives Conference, IEMDC, Wisconsin, USA, vol. 2, pp. 1286-1291, 2003.
20. D. G. Dorrell, T. J. E. Miller, and C. B. Rasmussen, "Inter-bar currents in induction machines," IEEE Transactions on Industry Applications, vol. 39, pp. 677-684, May-June 2003.
21. D. Gersh, A. C. Smith, and A. Samuelson, "Measurement of interbar resistance in cage rotors," Conference Proceedings of the Eighth International IEE Conference on Electrical Machines and Drives, EMD, no. 444, pp. 253-257, 1997.
22. R. F. Walliser and C. F. Landy, "Assessment of interbar currents in double cage induction motors with broken rotor bars," IEEE Transactions on Energy Conversion, pp. 159-164, 1994.
23. W. Deleroi, "Überwachen, Analysieren und Orten von elektrischen Unförmigkeiten in Käfigläufern," etzArchiv, vol. 5, no. H3, pp. 95-101, 1983.
24. W. Deleroi, "Squirrel cage motor with broken bar in the rotor - physical phenomena and their experimental assessment," Conference Proceedings, ICEM, 1982.