Accuracy analysis of three-dimensional bone surface models of the forearm constructed from multidetector computed tomography data

International Journal of Medical Robotics and Computer Assisted Surgery

Volumn 5, Issue 4, 2009, Pages 452-457

  Oka, Kunihiro ^a   Murase, Tsuyoshi ^a   Moritomo, Hisao ^a   Goto, Akira ^a   Sugamoto, Kazuomi ^a   Yoshikawa, Hideki ^a  

^a OSAKA UNIVERSITY GRADUATE SCHOOL OF MEDICINE   (Japan)

Author keywords

Computed tomography; Radiation dose; Upper extremity

Indexed keywords

DOSIMETRY; ERRORS; MULTIDETECTOR COMPUTED TOMOGRAPHY; RADIATION; THREE DIMENSIONAL COMPUTER GRAPHICS;

'DRY' [; 3D MODELS; 3D-MODELING; BONE MODELS; COMPUTED TOMOGRAPHY; COMPUTED TOMOGRAPHY DATA; DOSE COMPUTED TOMOGRAPHIES; MEAN ERRORS; RADIATION EXPOSURE; UPPER-EXTREMITY;

BONE;

ACCURACY; ARTICLE; COMPUTER ASSISTED TOMOGRAPHY; FOREARM; MEASUREMENT ERROR; MULTIDETECTOR COMPUTED TOMOGRAPHY; ORTHOPEDIC SURGERY; RADIATION DOSE; RADIATION EXPOSURE; SOFT TISSUE; THREE DIMENSIONAL IMAGING;

EID: 73449136127     PISSN: 14785951     EISSN: 1478596X     Source Type: Journal    
DOI: 10.1002/rcs.277     Document Type: Article

References (38)

1. Athwal GS, Ellis RE, Small CF, et al. Computer-assisted distal radius osteotomy. J Hand Surg [Am] 2003; 28(6): 951-958.
2. Beckmann J, Goetz J, Baethis H, et al. Precision of computer-assisted core decompression drilling of the femoral head. Arch Orthop Trauma Surg 2006; 126(6): 374-379.
3. Chen E, Goertz W, Lill CA. Implant position calculation for acetabular cup placement considering pelvic lateral tilt and inclination. Comput Aided Surg 2006; 11(6): 309-316.
4. Ellis RE, Tso CY, Rudan JF, et al. A surgical planning and guidance system for high tibial osteotomy. Comput Aided Surg 1999; 4(5): 264-274.
5. Kanlic EM, Delarosa F, Pirela-Cruz M. Computer assisted orthopaedic surgery - CAOS. Bosn J Basic Med Sci 2006; 6(1): 7-13.
6. Shimizu T, Fujioka F, Gomyo H, et al. Three-dimensional starch model for simulation of corrective osteotomy for a complex bone deformity: a case report. Foot Ankle Int 2003; 24(4): 364-367.
7. Wong KC, Kumta SM, Chiu KH, et al. Precision tumour resection and reconstruction using image-guided computer navigation. J Bone Joint Surg Br 2007; 89(7): 943-947.
8. Yamazaki M, Akazawa T, Okawa A, et al. Usefulness of three-dimensional full-scale modeling of surgery for a giant cell tumor of the cervical spine. Spinal Cord 2007; 45(3): 250-253.
9. Murase T, Moritomo H, Goto A, et al. Does three-dimensional computer simulation improve results of scaphoid nonunion surgery? Clin Orthop Relat Res 2005; 434: 143-150.
10. Murase T, Oka K, Moritomo H, et al. Three-dimensional corrective osteotomy of malunited fractures of the upper extremity with use of a computer simulation system. J Bone Joint Surg Am 2008; 90: 2375-2389.
11. Oka K, Moritomo H, Goto A, et al. Corrective osteotomy for malunited intra-articular fracture of the distal radius using a custom-made surgical guide based on three-dimensional computer simulation: case report. J Hand Surg [Am] 2008; 33(6): 835-840.
12. Gelaude F, Vander Sloten J, Lauwers B. Accuracy assessment of CT-based outer surface femur meshes. Comput Aided Surg 2008; 13(4): 188-199.
13. Hall EJ, Brenner DJ. Cancer risks from diagnostic radiology. Br J Radiol 2008; 81(965): 362-378.
14. Paul JF, Abada HT. Strategies for reduction of radiation dose in cardiac multislice CT. Eur Radiol 2007; 17(8): 2028-2037.
15. Kalra MK, Maher MM, Saini S. Multislice CT: update on radiation and screening. Eur Radiol 2003; 13: (suppl 5): M129-133.
16. Berrington de Gonzalez A, Darby S. Risk of cancer from diagnostic X-rays: estimates for the UK and 14 other countries. Lancet 2004; 363(9406): 345-351.
17. Kalra MK, Maher MM, Toth TL, et al. Strategies for CT radiation dose optimization. Radiology 2004; 230(3): 619-628.
18. Bonel HM, Jager L, Frei KA, et al. Optimization of MDCT of the wrist to achieve diagnostic image quality with minimum radiation exposure. AJR Am J Roentgenol 2005; 185(3): 647-654.
19. Bush CH, Gillespy T III, Dell PC. High-resolution CT of the wrist: initial experience with scaphoid disorders and surgical fusions. AJR Am J Roentgenol 1987; 149(4): 757-760.
20. Sugano N, Sasama T, Sato Y, et al. Accuracy evaluation of surface-based registration methods in a computer navigation system for hip surgery performed through a posterolateral approach. Comput Aided Surg 2001; 6(4): 195-203.
21. Lorensen WE, Cline HE. Marching cubes: a high resolution 3D surface construction algorithm. Comput Graph 1987; 21: 163-169.
22. Besl PJ, Mackay N. A method for registration of 3D shapes. IEEE Trans Patt Anal 1992; 14: 239-256.
23. Audette MA, Ferrie FP, Peters TM. An algorithmic overview of surface registration techniques for medical imaging. Med Image Anal 2000; 4(3): 201-217.
24. Shirotani T. Realistic torso phantom for calibration of in vivo transuranic nuclide-counting facilities. J Nucl Sci Technol 1988; 25(11): 875-883.
25. Decking R, Markmann Y, Fuchs J, et al. Leg axis after computer-navigated total knee arthroplasty: a prospective randomized trial comparing computer-navigated and manual implantation. J Arthroplasty 2005; 20(3): 282-288.
26. Delp SL, Stulberg SD, Davies B, et al. Computer assisted knee replacement. Clin Orthop Relat Res 1998; 354: 49-56.
27. DiGioia AM, Jaramaz B, Blackwell M, et al. The Otto Aufranc Award. Image guided navigation system to measure intraoperatively acetabular implant alignment. Clin Orthop Relat Res 1998; 355: 8-22.
28. La Palombara PF, Fadda M, Martelli S, et al. Minimally invasive 3D data registration in computer and robot assisted total knee arthroplasty. Med Biol Eng Comput 1997; 35(6): 600-610.
29. Langlotz F, Stucki M, Bachler R, et al. The first twelve cases of computer assisted periacetabular osteotomy. Comput Aided Surg 1997; 2(6): 317-326.
30. Ybinger T, Kumpan W, Hoffart HE, et al. Accuracy of navigation-assisted acetabular component positioning studied by computed tomography measurements: methods and results. J Arthroplasty 2007; 22(6): 812-817.
31. Amiot LP, Lang K, Putzier M, et al. Comparative results between conventional and computer-assisted pedicle screw installation in the thoracic, lumbar, and sacral spine. Spine 2000; 25(5): 606-614.
32. Girardi FP, Cammisa FP Jr, Sandhu HS, et al. The placement of lumbar pedicle screws using computerised stereotactic guidance. J Bone Joint Surg Br 1999; 81(5): 825-829.
33. Laine T, Lund T, Ylikoski M, et al. Accuracy of pedicle screw insertion with and without computer assistance: a randomised controlled clinical study in 100 consecutive patients. Eur Spine J 2000; 9(3): 235-240.
34. Merloz P, Tonetti J, Pittet L, et al. Computer-assisted spine surgery. Comput Aided Surg 1998; 3(6): 297-305.
35. Biant LC, Yeoh K, Walker PM, et al. The accuracy of bone resections made during computer navigated total knee replacement. Do we resect what the computer plans we resect? Knee 2008; 15(3): 238-241.
36. Koestler W, Sidler R, Gonzalez Ballester MA, et al. A feasibility study of computer-assisted bone graft implantation for tissue-engineered replacement of the human ankle joint. Comput Aided Surg 2008; 13(4): 207-217.
37. Ruppin J, Popovic A, Strauss M, et al. Evaluation of the accuracy of three different computer-aided surgery systems in dental implantology: optical tracking vs. stereolithographic splint systems. Clin Oral Implants Res 2008; 19(7): 709-716.
38. Tamura Y, Sugano N, Sasama T, et al. Surface-based registration accuracy of CT-based image-guided spine surgery. Eur Spine J 2005; 14(3): 291-297.