Complex fracture development related to stratigraphic architecture: Challenges for structural deformation prediction, Tensleep Sandstone at the Alcova anticline, Wyoming

AAPG Bulletin

Volumn 93, Issue 11, 2009, Pages 1427-1446

  Zahm, Christopher K ^a   Hennings, Peter H ^b  

^a UNIVERSITY OF TEXAS AT AUSTIN   (United States)

^b Subsurface Group Inc Texas   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; FORECASTING; PETROLEUM PROSPECTING; SANDSTONE; STRATIGRAPHY; STRUCTURAL GEOLOGY;

COMPLEX RESERVOIRS; DIAGENETIC ALTERATION; FRACTURE PREDICTION; HOST ROCKS; INTENSITY MODELS; STRATIGRAPHIC ARCHITECTURE; STRUCTURAL DEFORMATION; SUBSURFACE RESERVOIR;

FRACTURE;

ANTICLINE; DEFORMATION; DEPOSITIONAL SEQUENCE; DIAGENESIS; FRACTURE INITIATION; HOST ROCK; HYDROCARBON EXPLORATION; PREDICTION; RESERVOIR CHARACTERIZATION; SANDSTONE; SUBSURFACE FLOW;

UNITED STATES; WYOMING;

EID: 73449099616     PISSN: 01491423     EISSN: None     Source Type: Journal    
DOI: 10.1306/08040909110     Document Type: Article

References (75)

1. Agatston, R. S., 1954, Pennsylvanian and Lower Permian of northern and eastern Wyoming: AAPG Bulletin, v. 38, p. 508-583.
2. Ahlgren, S., and J. Holmlund, 2002, Outcrop scans give new view: AAPG Explorer, v. 23, no. 7, p. 22-23.
3. Allmendinger, R. W., 1998, Inverse and forward numerical modeling of trishear fault-propagation folds: Tectonics, v. 17, no. 4, p. 640-656, doi:10.1029/98TC01907.
4. Allwardt, P. F., N. Bellahsen, and D. D. Pollard, 2007, Curvature and fracturing based on global positioning system data collected at Sheep Mountain anticline, Wyoming: Geosphere, v. 3, p. 408- 421, doi:10.1130/GES00088.1.
5. Aviantara, A., 2002, Facies architecture of the Tensleep Sandstone, Bighorn Basin, Bighorn County, Wyoming: Ph.D. dissertation, University of Tulsa, Oklahoma, 249 p.
6. Bai, T., and D. D. Pollard, 2000, Fracture spacing in layered rocks: A new explanation: Journal of Structural Geology, v. 22, p. 43-57, doi:10.1016/S0191-8141(99)00137-6.
7. Bellahsen, N., P. Fiore, and D. D. Pollard, 2006, The role of fractures in the structural interpretation of Sheep Mountain anticline, Wyoming: Journal of Structural Geology, v. 28, no. 5, p. 850- 867, doi:10.1016/j.jsg.2006.01.013. (Pubitemid 43812170)
8. Bellian, J. A., C. Kerans, and D. C. Jennette, 2005, Digital outcrop models: Applications of terrestrial scanning lidar technology in stratigraphic modeling: Journal of Sedimentary Research, v. 75, p. 166-176, doi:10.2110/jsr.2005.013. (Pubitemid 40355331)
9. Bergbauer, S., and D. D. Pollard, 2004, A new conceptual fold-fracture model including prefolding joints, based on the Emigrant Gap anticline, Wyoming: Geological Society of America Bulletin, v. 116, no. 3-4, p. 294-307, doi:10.1130/B25225.1. (Pubitemid 38423500)
10. Biot, M. A., W. L. Medlin, and L. Masse, 1983, Fracture penetration through an interface: Society of Petroleum Engineers Journal, v. 23, p. 857-869.
11. Boyd, D. W., 1993, Paleozoic history of Wyoming, in A. W. Snoke, J. R. Steidtmann, and S. M. Roberts, eds., Geology of Wyoming: Wyoming State Geological Survey Memoir 5, p. 164- 187.
12. Bradley, W. H., 1935, Anticlines between Hiawatha gas field (Colorado) and Baggs, Wyoming: AAPG Bulletin, v. 19, p. 537- 543.
13. Brookfield, M. E., 1992, Eolian systems, in R. G. Walker and N. P. James, eds., Fades model response to sea level change: Toronto, Ontario, Canada, Geological Association of Canada Publications, p. 142-156.
14. Carr-Crabaugh, M., and T. L. Dunn, 1996, Reservoir heterogeneity as a function of accumulation and preservation dynamics, Tensleep Sandstone, Bighorn and Wind River basins, Wyoming, in M. W. Longman and M. D. Sonnenfeld, eds., Paleozoic systems of the Rocky Mountain region: Denver, Colorado, Rocky Mountain Section, Society for Sedimentary Geology (SEPM), p. 305- 320.
15. Childs, C, A. Nicol, J. J. Walsh, and J. Watterson, 1996, Growth of vertically segmented normal faults: Journal of Structural Geology, v. 18, p. 1389-1397, doi:10.1016/S0191-8141(96)00060-0.
16. Chopra, S., and K. J. Marfurt, 2007, Curvature attribute applications to 3-D seismic data: The Leading Edge, v. 26, p. 404-414, doi:10.1190/l .2723201.
17. Cook, T. S., and F. Erdogan, 1972, Stresses in bonded materials with a crack perpendicular to the interface: International Journal of Engineering Science, v. 10, p. 677-697, doi:10.1016/0020-7225 (72)90063-8.
18. Cooke, M. L., 1997, Predicting fracture localization in folded strata from mechanical stratigraphy and fold shape: Case study of east Kaibab monocline, Utah: International Journal of Rock Mechanics and Mining Sciences, v. 34, no. 3-4, p. 56.el-56.el2, doi: 10.1016/S1365-1609(97)00248-7.
19. Corbett, K., M. Friedman, and J. Spang, 1987, Fracture development and mechanical stratigraphy of Austin Chalk, Texas: AAPG Bulletin, v. 71, p. 17-28.
20. Cosgrove, J. W., and M. S. Ameen, 2000, A comparison of the geometry, spatial organization and fracture patterns associated with forced folds and buckle folds, in J. W. Cosgrove and M. S. Ameen, eds. Forced folds and fractures: Geological Society (London) Special Publication 169, p. 7-21.
21. Couples, G., H. Lewis, and P. W. G. Tanner, 1998, Strain partitioning during flexular-slip folding in M. P. Coward, T. S. Daltaban, and H. Johnson, eds., Structural geology in reservoir characterization: Geological Society (London) Special Publication 127, p. 149-165.
22. Cox, S. J. D., and C. H. Scholz, 1988, On the formation and growth of faults: An experimental study: Journal of Structural Geology, v. 10, p. 413-430, doi:10.1016/0191-8141(88)90019-3. (Pubitemid 18649052)
23. Deere, D. U., and R. P. Miller, 1966, Engineering classification and index properties for intact rock: Air Force Systems Command, Kirtland Air Force Base, New Mexico, Report AFWL-TR-65-116.
24. Dershowitz, W. S., and H. H. Herda, 1992, Interpretation of fracture spacing and intensity, in J. R. Tillerson and W. R. Wawersik, eds., Proceedings of the 33rd U.S. Symposium on Rock Mechanics: Rotterdam, Balkema, p. 757-766.
25. Dershowitz, W. S., and P. R. LaPointe, 1994, Discrete fracture approaches for oil and gas applications, in R. A. Nelson and S. Laubach, eds., Rock mechanics: Rotterdam, Balkema, p. 19-30.
26. Ericsson, J. B., H. C. McKean, and R. J. Hooper, 1998, Facies and curvature-controlled 3-D fracture models in Cretaceous carbonate reservoir, Arabian Gulf, in G. Jones, Q. J. Fisher, and R. J. Knipe, eds., Faulting, fault sealing and fluid flow in hydrocarbon reservoirs: Geological Society (London) Special Publication 147, p. 299-312.
27. Erslev, E. A., 1991,Trishear fault-propagation folding: Geology, v. 19, no. 6, p. 617-620, doi:10.1130/0091-7613(1991)019.
28. Erslev, E. A., and K. R. Mayborn, 2001, Multiple geometries and modes of fault-propagation folding in the Canadian thrust belt: Journal of Structural Geology, v. 19, no. 3-4, p. 321-335, doi: 10.1016/SO191 -8141 (97)83027-1.
29. Ferrill, D. A., and A. P. Morris, 2003, Dilational normal faults: Journal of Structural Geology, v. 25, p. 183-196, doi: 10.1016 /S0191-8141(02)00029-9.
30. Fischer, M. P., and M. S. Wilkerson, 2000, Predicting the orientation of joints from fold shape: Results of pseudo-three-dimensional modeling and curvature analysis: Geology, v. 28, no. 1, p. 15-18, doi: 10.1130/0091 -7613(2000)28 <15:PTOOJF>2.0.CO;2.
31. Friedman, M., O. Kwon, and V. L. French, 1994, Containment of natural fractures in brittle beds of the Austin chalk, rock mechanics, models and measurements challenges from industry, in P. P. Nelson and S. E. Laubach, eds., Proceedings of the 1st North American Mechanics Symposium: Texas, Balkema, p. 833-340.
32. 2: Environmental Geosciences, v. 13, no. 3, p. 181-199, doi:10.1306/eg.01200605017. (Pubitemid 44530209)
33. Gilbertson, N. J., 2006,3-D geologic modeling and fracture interpretation of the Tensleep Sandstone, Alcova anticline, Wyoming: M.S. thesis, Colorado School of Mines, Golden, 265 p.
34. Griffiths, P., S. Jones, N. Salter, F. Schaefer, R. Osfield, and H. Reiser, 2002, A new technique for 3-D flexural-slip restoration in fault- related folds: The transition from 2-D to 3-D: Journal of Structural Geology, v. 24, no. 4, p. 773-782, doi:10.1016/S0191- 8141(01)00124-9.
35. Gross, M. R., 1993, The origin and spacing of cross joints: Example from the Monterey Formation, Santa Barbara coastline, California: Journal of Structural Geology, v. 15, p. 737-751, doi:10 .1016/0191-8141 (93)90059-J.
36. Guzofski, C. A., J. P. Mueller, J. H. Shaw, P. Muron, D. A. Medwedeff, F. Biolotti, and C. Rivero, 2009, Insights into the mechanisms of fault-related folding provided by volumetric structural restorations using spatially varying mechanical constraints: AAPG Bulletin, v. 93, no. 4, p. 479-502, doi:10.1306/l 1250807130.
37. Harris, J. F., G. L. Taylor, and J. L. Walper, 1960, Relation of deformational fractures in sedimentary rocks to regional and local structure (Wyoming): AAPG Bulletin, v. 44, p. 1853-1873.
38. Hennings, P. H., J. E. Olson, and L. B. Thompson, 2000, Combining outcrop data and three-dimensional structural models to characterize fractured reservoirs: An example from Wyoming: AAPG Bulletin, v. 84, no. 6, p. 830-849.
39. Huang, Q., and J. Angelier, 1989, Fracture spacing and its relation to bed thickness: Geological Magazine, v. 126, p. 355-362, doi:10 .1017/S0016756800006555.
40. Huang, Y., and H. W. Zhang, 1995, The role of metal plasticity and interfacial strength in the cracking of metal/ceramic laminates: Acta Metallurgies et Materialia, v. 43, p. 1523-1530.
41. Hurley, N. F., A. A. Aviantara, and D. R. Kerr, 2003, Structural and stratigraphic compartments in a horizontal well drilled in the eolian Tensleep Sandstone, Byron field, Wyoming: AAPG Methods in Exploration Series, v. 14, p. 143-159.
42. Janson, X., C. Kerans, J. A. Bellian, and W. Fitchen, 2007, Three- dimensional geological and synthetic seismic model of Early Permian redeposited basinal carbonate deposits, Victorio Canyon, west Texas: AAPG Bulletin, v. 91, p. 1405-1436, doi:10 .1306/05210705188.
43. Kerr, D. R., 1989, Sedimentology and stratigraphy of Pennsylvanian and Lower Permian strata (upper Amsden Formation and Ten- sleep Sandstone) in north-central Wyoming: Ph.D. dissertation, University of Wisconsin at Madison, 469 p.
44. Kokkalas, S., P. Xypolias, I. K. Koukouvelas, and T. Doutsos, 2003, Relationships between folding and fracturing in orogenic belts: Examples from the Rhenohercynian zone (Germany) and the external Hellenides (Greece): Geologica Carpathica, v. 54, no. 3, p. 153-162.
45. Ladeira, F. L., and N. J. Price, 1981, Relationship between fracture spacing and bed thickness: Journal of Structural Geology, v. 3, p. 179-183, doi:10.1016/0191-8141(81)90013-4.
46. Laubach, S. E., 1988, Fractures generated during folding of the Palm- erton Sandstone, eastern Pennsylvania: Journal of Geology, v. 96, no. 4, p. 495-503, doi:10.1086/629243.
47. Lemiszki, P. J., J. D. Landes, and R. D. Hatcher Jr., 1994, Controls on hinge-parallel extension fracturing in single-layer tangential- longitudinal strain folds: Journal of Geophysical Research-Solid Earth, v. 99, no. B11, p. 22,027-22,041, doi:10.1029/94JB01853.
48. Lewis, H., S. A. Hall, and G. D. Couples, 2009, Geomechanical simulation to predict open subsurface fractures: Geophysical Prospecting, v. 57, no. 2, p. 285-299, doi:10.1111/j.1365-2478 .2009.00786.x.
49. Lisle, R. J., 1994, Detection of zones of abnormal strains in structures using Gaussian curvature analysis: AAPG Bulletin, v. 78, p. 1811-1819.
50. Lisle, R. J., 2000, Predicting patterns of strain from three-dimensional fold geometries: Neutral surface folds and forced folds, in J. M. Cosgrove and M. S. Ameen, eds., Forced folds and fractures: Geological Society (London) Special Publication 169, p. 213-221.
51. Lorenz, J. C, J. L. Sterling, D. S. Schechter, C. L. Whigham, and J. J. Jensen, 2002, Natural fractures in the Spraybeny Formation, Midland Basin, Texas: The effects of mechanical stratigraphy on fracture variability and reservoir behavior AAPG Bulletin, v. 86, p. 505-524.
52. Maerten, L., and F. Maerten, 2006, Chronologic modeling of faulted and fractured reservoirs using geomechanically based restoration: Technique and industry applications: AAPG Bulletin, v. 90, no. 8, p. 1201-1226, doi: 10.1306/02240605116. (Pubitemid 44227432)
53. McQuillan, H., 1973, Small-scale fracture density in Asmari Formation of southwest Iran and its relation to bed thickness and structural setting: AAPG Bulletin, v. 57, p. 2367-2385.
54. Morris, A. P., D. A. Ferrill, and R. N. McGinnis, this volume, Mechanical stratigraphy and faulting in Cretaceous carbonates: AAPG Bulletin, v. 93, p. xxx-xxx.
55. Narr, W., and J. Suppe, 1991, Joint spacing in sedimentary rocks: Journal of Structural Geology, v. 13, p. 1037-1048, doi:10 .1016/0191-8141(91)90055-N.
56. Poole, R. W., and I. W. Farmer, 1980, Consistency and repeatability of Schmidt Hammer rebound data during field testing: International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts, v. 17, p. 167-171.
57. Renshaw, C. E., T. A. Myse, and S. R. Brown, 2003, Role of heterogeneity in elastic properties and layer thickness in the jointing of layered sedimentary rocks: Geophysical Research Letters, v. 24, p. 22-95.
58. Rijken, P., and M. L. Cooke, 2001, Role of shale thickness on vertical connectivity of fractures; application of crack-bridging theory to the Austin Chalk, Texas: Tectonophysics, v. 337, no. 1-2, p. 117-133, doi:10.1016/S0040- 1951(01)00107-X. (Pubitemid 32779087)
59. Rotevatn, A., S. J. Buckley, J. A. Howell, and H. Fossen, 2009, Overlapping faults and their effect on fluid flow in different reservoir types: A LIDAR-based outcrop modeling and flow simulation study: AAPG Bulletin, v. 93, no. 3, p. 407-427, doi:10.1306 /09300807092.
60. Sanz, P. F., D. D. Pollard, P. F. Allwardt, and R. L. Borja, 2008, Mechanical models of fracture reactivation and slip on bedding surfaces during folding of the asymmetric anticline at Sheep Mountain, Wyoming: Journal of Structural Geology, v. 30, no. 9, p. 1177-1191, doi:10.1016/5.jsg.2008.06.002.
61. Schopfer, M. J. P., C. Childs, J. J. Walsh, T. Manzocchi, and H. A. Koyi, 2007, Geometrical analysis of the refraction and segmentation of normal faults in periodically layered sequences: Journal of Structural Geology, v. 29, p. 318-335, doi:10.1016/j.jsg.2006 .08.006.
62. Smart, K. J., D. A. Ferrill, G. I. Ofoegbu, D. W. Sims, N. M. Franklin, and A. P. Morris, 2005, Integration of structural analyses with numerical modeling: Analysis of stress and strain evolution to aid reservoir exploration and development (abs.): AAPG Annual Meeting, Calgary: httpy/www. searchanddiscovery.net/documents /abstracts/2005annual-calgary/abstracts/smart. htm (accessed October 7, 2009).
63. Thiercelin, M., J. C. Roegiers, T. J. Boone, and A. R. Ingraffea, 1987, An investigation of the material parameters that govern the behavior of fractures approaching rock interfaces, in Proceedings of the 6th International Congress on Rock Mechanics, Montreal, Canada: A. A. Balkema, p. 263-269.
64. Thomas, A. L., 1993, Poly3D: A three-dimensional, polygonal element, displacement discontinuity boundary element computer program with applications to fractures, faults, and cavities in the earth's crust M.S. thesis, Stanford University, Palo Alto, California, 69 p.
65. Treagus, S. H., 1988, Strain refraction in layered systems: Journal of Structural Geology, v. 10, no. 5, p. 517-527, doi:10.1016 /0191-8141(88)90038-7.
66. Underwood, C. A., M. L. Cooke, J. A. Simo, and M. A. Muldoon, 2003, Stratigraphic controls on vertical fracture patterns in Silurian dolomite, northeastern Wisconsin: AAPG Bulletin, v. 87, p. 121-142.
67. Vealey, S., 1991, Reservoir characterization and heterogeneity of the Pennsylvanian Tensleep Sandstone at Alcova anticline, Natrona County, Wyoming: M.S. thesis, Colorado School of Mines, Golden, 181 p.
68. Walsh, J. J., J. Watterson, W. R. Bailey, and C. Childs, 1999, Fault relays, bends and branch-lines: Journal of Structural Geology, v. 21, p. 1019-1026, doi:10.1016/S0191-8141(99)00026-7.
69. Walsh, J. J., W. R. Bailey, C. Childs, A. Nicol, and C. G. Bonson, 2003, Formation of segmented normal faults: A 3-D perspective: Journal of Structural Geology, v. 25, p. 1251-1262, doi:10.1016/S0191-8141(02)00161-X. (Pubitemid 36580314)
70. Wheeler, D. M., 1986, Stratigraphy and sedimentology of the Ten- sleep Sandstone, southeast Bighorn Basin, Wyoming: M.S. thesis, Colorado School of Mines, Golden, Colorado, 263 p.
71. Wilkins, S. J., and M. R. Gross, 2001, Normal fault growth in layered rocks at Split Mountain, Utah: Influence of mechanical stratigraphy on dip linkage, fault restriction and fault scaling: Journal of Structural Geology, v. 24, p. 1413-1429, doi:10.1016 /S0191-8141(01)00154-7.
72. Wu, H., and D. D. Pollard, 1995, An experimental study of the relationship between joint spacing and layer thickness: Journal of Structural Geology, v. 17, p. 887-905, doi:10.1016/0191-8141 (94)00099-L.
73. Zahm, C. K., R. Marrett, and J. M. Sharp Jr., 1998, Prediction of regional groundwater flow and permeability anisotropy using fractured outcrop exposures, Edwards aquifer, central Texas, in J. V. Brahana, Y. Eckstein, L. K. Ongley, R. Schneider, and J. E. Moore, eds., Proceedings of the Joint Meeting of the 28th Congress of the International Association of Hydrogeologists and the Annual Meeting of the American Institute of Hydrologists, v. 28, p. 697-705.
74. Zahm, C. K., L. C. Zahm, and J. A. Bellian, in press, Integrated fracture prediction using sequence stratigraphy within a carbonate fault damage zone, Texas, U.S.A.: Journal of Structural Geology, Montreal, Canada: A.A. Balkema, doi:10.1016/j.jsg.2009 .05.012.
75. Zhang, Q., 2007, Stratigraphy and sedimentology of the Tensleep Sandstone at the Teapot dome and in outcrops, Wyoming: M.S. thesis, University of Wyoming, Laramie, 190 p.