Alkali-activated aluminosilicate composite with heat-resistant lightweight aggregates exposed to high temperatures: Mechanical and water transport properties

Cement and Concrete Composites

Volumn 32, Issue 2, 2010, Pages 157-163

  Zuda, Lucie ^a   Drchalová, Jaroslava ^a   Rovnaník, Pavel ^b   Bayer, Patrik ^b   Keršner, Zbyněk ^b   Černý, Robert ^a  

^a CZECH TECHNICAL UNIVERSITY IN PRAGUE   (Czech Republic)

^b BRNO UNIVERSITY OF TECHNOLOGY   (Czech Republic)

Author keywords

Alkali activated aluminosilicate composites; Mechanical properties; Thermal load; Vermiculite; Water transport properties

Indexed keywords

ALKALI-ACTIVATED ALUMINOSILICATE COMPOSITES; CEMENT CONCRETE; CEMENT-BASED; EXPANDED VERMICULITE; FLEXURAL STRENGTH; GASEOUS COMPOUNDS; HIGH TEMPERATURE; LIGHT WEIGHT AGGREGATE; LIGHTWEIGHT COMPOSITE MATERIALS; MOISTURE DIFFUSIVITY; OPEN POROSITY; PHYSICAL CHARACTERISTICS; PROTECTING LAYER; REFERENCE STATE; ROOM TEMPERATURE; ROOM-TEMPERATURE CONDITIONS; THREE ORDERS OF MAGNITUDE; VERMICULITE; WATER TRANSPORT; WATER VAPOR TRANSPORT; WORST CASE;

ALUMINOSILICATES; ATMOSPHERIC THERMODYNAMICS; BENDING STRENGTH; CEMENTS; CLAY MINERALS; COMPOSITE MICROMECHANICS; COMPRESSIVE STRENGTH; HEAT TREATMENT; HEATING; THERMAL EFFECTS; THERMAL LOAD; THERMOANALYSIS; TRANSPORT PROPERTIES; WATER RECYCLING; WATER VAPOR;

MECHANICAL PROPERTIES;

EID: 72949097200     PISSN: 09589465     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cemconcomp.2009.11.009     Document Type: Article

References (28)

1. Roy D.M. Alkali-activated cements. Opportunities and challenges. Cem Concr Res 29 (1999) 249-254
2. Glukhovsky V.D. Soil silicates (1959), Gosstroi Publishers, Kiev
3. Purdon A.O. The action of alkalis on blast furnace slag. J Soc Chem Ind 59 (1940) 191-202
4. Pacheco-Torgal F., Castro-Gomes J., and Jalali S. Alkali-activated binders: a review. Part 1. Historical background, terminology, reaction mechanisms and hydration products. Constr Build Mater 22 (2008) 1305-1314
5. Pacheco-Torgal F., Castro-Gomes J., and Jalali S. Alkali-activated binders: a review. Part 2. About materials and binders manufacture. Constr Build Mater 22 (2008) 1315-1322
6. Palomo A., Grutzeck M.W., and Blanco M.T. Alkali-activated fly ashes. A cement for the future. Cem Concr Res 29 (1999) 1323-1329
7. McCarter W.J., Chrisp T.M., and Starrs G. The early hydration of alkali-activated slag: developments in monitoring techniques. Cem Concr Compos 21 (1999) 277-283
8. Puertas F., and Fernandez-Jimenez A. Mineralogical and microstructural characterisation of alkali-activated fly ash/slag pastes. Cem Concr Compos 25 (2003) 287-292
9. Douglas E., Bilodeau A., and Malhotra V.M. Properties and durability of alkali-activated slag concrete. ACI Mater J 89 (1992) 509-516
10. Collins F.G., and Sanjayan J.G. Workability and mechanical properties of alkali activated slag concrete. Cem Concr Res 29 (1999) 455-458
11. Bakharev T., Sanjayan J.G., and Cheng Y.B. Effect of admixtures on properties of alkali activated slag concrete. Cem Concr Res 30 (2000) 1367-1374
12. Collins F., and Sanjayan J. Unsaturated capillary flow within alkali activated slag concrete. J Mat Civil Eng 20 (2008) 565-570
13. Yang K.H., Song J.K., Ashour A.F., and Lee E.T. Properties of cementless mortars activated by sodium silicate. Constr Build Mater 22 (2008) 1981-1989
14. Al-Otaibi S. Durability of concrete incorporating GGBS activated by water-glass. Constr Build Mater 22 (2008) 2059-2067
15. Yang K.H., and Song J.K. Workability loss and compressive strength development of cementless mortars activated by combination of sodium silicate and sodium hydroxide. J Mat Civil Eng 21 (2009) 119-127
16. Zuda L., Pavlík Z., Rovnaníková P., Bayer P., and Černý R. Properties of alkali activated aluminosilicate material after thermal load. Int J Thermophys 27 (2006) 1250-1263
17. Zuda L., Bayer P., Rovnaník P., and Černý R. Mechanical and hydric properties of alkali-activated aluminosilicate composite with electrical porcelain aggregates. Cem Concr Compos 30 (2008) 266-273
18. Fernandez-Jimenez A., Palomo A., Pastor J.Y., and Martin A. New cementitious materials based on alkali-activated fly ash: performance at high temperatures. J Am Ceram Soc 91 (2008) 3308-3314
19. Guerrieri M., Sanjayan J., and Collins F. Effect of slag on the performance of concretes in hydrocarbon fire. ACI SP-255: designing concrete structures for fire safety (2008), American Concrete Institute, Farmington Hills (MI) p. 23-45
20. Guerrieri M., Sanjayan J.G., and Collins F.G. Residual compressive behavior of alkali activated concrete exposed to elevated temperatures. Fire Mater 33 (2009) 51-62
21. Zuda L., and Černý R. Measurement of linear thermal expansion coefficient of alkali-activated aluminosilicate composites up to 1000 °C. Cem Concr Compos 31 (2009) 263-267
22. Duxson P., Lukey G.C., and van Deventer J.S.J. Thermal evolution of metakaolin geopolymers. Part 1. Physical evolution. J Non-Cryst Solids 352 (2006) 5541-5555
23. Duxson P., Lukey G.C., and van Deventer J.S.J. Physical evolution of Na-geopolymer derived from metakaolin up to 1000 °C. J Mater Sci 42 (2007) 3044-3054
24. Roels S., Carmeliet J., Hens H., Adan O., Brocken H., Černý R., et al. Interlaboratory comparison of hygric properties of porous building materials. J Therm Envelop Build Sci 27 (2004) 307-325
25. Černý R., and Rovnaníková P. Transport processes in concrete (2002), Spon Press, London
26. Matano C. On the relation between the diffusion coefficient and concentration of solid metals. Jpn J Phys 8 (1933) 109-113
27. Kumaran M.K. Moisture diffusivity of building materials from water absorption measurements. J Therm Envelop Build Sci 22 (1999) 349-355
28. Drchalová J., and Černý R. A simple gravimetric method for determining the moisture diffusivity of building materials. Constr Build Mater 17 (2003) 223-228