Workability loss and compressive strength development of cementless mortars activated by combination of sodium silicate and sodium hydroxide

Journal of Materials in Civil Engineering

Volumn 21, Issue 3, 2009, Pages 119-127

  Yang, Keun Hyeok ^a   Song, Jin Kyu ^b  

^a Mokpo National University   (South Korea)

^b Chonnam National University   (South Korea)

Author keywords

Compressive strength; Fly ash; Mortars; Slag

Indexed keywords

ALUMINUM; CALCIUM; CALCIUM ALLOYS; CEMENT MANUFACTURE; FLY ASH; GELATION; HYDRATES; HYDRATION; MORTAR; OXIDES; PLASTER; PORTLAND CEMENT; POWDERS; SCANNING ELECTRON MICROSCOPY; SILICA; SILICATES; SLAGS; SODIUM;

ALKALINE ACTIVATORS; ALUMINUM OXIDES; CALCIUM CONTENTS; CALCIUM SILICATE HYDRATES; CEMENTLESS; EMPIRICAL EQUATIONS; ENVIRONMENT-FRIENDLY; FLOW LOSS; GROUND GRANULATED BLAST-FURNACE SLAGS; HYDRATION PRODUCTS; MICROSTRUCTURAL CHARACTERISTICS; MIXING RATIOS; ORDINARY PORTLAND CEMENT MORTARS; QUALITY COEFFICIENTS; ROOM TEMPERATURES; SCANNING ELECTRON MICROSCOPES; SODIUM HYDROXIDES; SODIUM SILICATES; SOURCE MATERIALS; SURFACE DENSITIES; TEST RESULTS; WORKABILITY LOSS; X- RAY DIFFRACTIONS;

COMPRESSIVE STRENGTH;

COMPRESSIVE STRENGTH; FLY ASH; HYDRATION; HYDROXIDE; MICROSTRUCTURE; MORTAR; SILICATE; SLAG;

EID: 60649115252     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0899-1561(2009)21:3(119)     Document Type: Article

References (19)

1. American Concrete Institute (ACI). (1994a). "Prediction of creep, shrinkage, and temperature effects in concrete structures." ACI manual of concrete practice. Part 1, ACI 209R-92, Detroit.
2. American Concrete Institute (ACI). (1994b). "Use of fly ash in concrete." ACI manual. Part 1, Committee 226.3R-87, Detroit.
3. ASTM. (2003). Annual book ASTM standards, Philadelphia.
4. Brough, A. R., and Atkinson, A. (2002). "Sodium silicate-based, alkali-activated slag mortars. Part I: Strength, hydration and microstructure." Cem. Concr. Res. CCNRAI0008-8846, 32(6), 865-879.
5. Gartner, E. (2004). "Industrially interesting approaches to 'Low-CO2' cements." Cem. Concr. Res. CCNRAI0008-8846, 34(9), 1489-1498.
6. Hardjito, D., Wallah, S. E., Sumajouw, D. M. J., and Rangan, B. V. (2004). "On the development of fly ash-based geopolymer concrete." ACI Mater. J. AMAJEF0889-325X, 101(6), 467-472.
7. Hemmings, R. T., and Berry, E. E. (1988). "On the glass in coal fly ashes: Recent advances." Mater. Res. Soc. Symp. Proc. MRSPDH0272-9172, 113, 3-38.
8. Korean Standards Information Center. (2006). Korean industrial standard (KS), Seoul, South Korea.
9. Kovalchuk, G., Fernández-Jiménez, A., and Palomo, A. (2007). "Alkali-activated fly ash: Effect of thermal curing conditions on mechanical and microstructural development-Part II." Fuel FUELAC0016-2361, 86(3), 315-322.
10. Malhotra, V. M. (2002). "Introduction: Sustainable development and concrete technology." Concr. Int. CNCIEH0162-4075, 24(7), 22.
11. Malhotra, V. M., and Mehta, P. K. (1996). Pozzolanic and cementitious materials, Gordon and Breach Publishers, USA.
12. Pacheco-Torgal, F., Castro-Gomes, J., and Jalali, S. (2008). "Alkali-activated binders: A review. Part 2. About materials and binder manufacture." Constr. Build. Mater. CBVME20950-0618, 22(7), 1305-1314.
13. Palomo, A., Grutzeck, M. W., and Blanco, M. T. (1999). "Alkali-activated fly ashes: A cement for the future." Cem. Concr. Res. CCNRAI0008-884610.1016/S0008-8846(98)00243-9, 29(8), 1323-1329.
14. Roy, D. M. (1999). "Alkali-activated cements: Opportunities and challenges." Cem. Concr. Res. CCNRAI0008-8846, 29(2), 249-254.
15. Wang, S. D., Pu, X. C., Scrivener, K. L., and Pratt, P. L. (1995). "Alkali-activated slag cement and concrete: A review of properties and problems." Adv. Cem. Res. ACEREN0951-7197, 27, 93-102.
16. Wang, S. D., Scrivener, K. L., and Pratt, P. L. (1994). "Factors affecting the strength of alkali-activated slag." Cem. Concr. Res. CCNRAI0008-8846, 24(6), 1033-1043.
17. Xu, H., and van Deventer, S. J. V. (2002). "Geopolymerisation of multiple minerals." Minerals Eng. MENGEB0892-6875, 15(12), 1131-1139.
18. Yang, K. H., Hwang, H. Z., Kim, S. Y., and Song, J. K. (2007). "Development of a cementless mortar using hwangtoh binder." Build. Environ. BUSCBC0360-1323, 42(10), 3717-3725.
19. Yang, K. H., Song, J. K., Ashour, A. F., and Lee, E. T. (2008). "Properties of cementless mortar activated by sodium silicate." Constr. Build. Mater. CBVME20950-0618, 22(8), 1981-1989.