Current topics on reliability of high power electrical machines employed in mining applications

Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)

Volumn , Issue , 2009, Pages

  Pontt, Jorge ^a  

^a DEPARTAMENTO DE FÍSICA   (Chile)

Author keywords

Aging; Dielectric breakdown; Electromagnetic forces; Failure analysis; Insulation; Insulation thermal factors; Mining industry safety; Partial discharges; Power system reliability; Reliability; Surface contamination

Indexed keywords

DIELECTRIC BREAKDOWN; DIELECTRIC BREAKDOWNS; ELECTROMAGNETIC FORCES; INSULATION THERMAL FACTORS; MINING INDUSTRY; POWER SYSTEM RELIABILITY; SURFACE CONTAMINATIONS;

CONDITION MONITORING; DIELECTRIC MATERIALS; ELECTRIC BREAKDOWN; ELECTRIC MACHINERY; ELECTRIC POWER TRANSMISSION NETWORKS; MAINTAINABILITY; MATERIALS TESTING; MINING; MINING MACHINERY; PARTIAL DISCHARGES; QUALITY ASSURANCE; RELIABILITY ANALYSIS; SAFETY FACTOR; SURFACE DISCHARGES; THERMAL INSULATION;

FAILURE ANALYSIS;

EID: 72849130935     PISSN: 01972618     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/IAS.2009.5324891     Document Type: Conference Paper

References (38)

1. H. Akagi, "Large static converters for industry and utility applications", in Proceedings of the IEEE, Vol. 89, No 6, June 2001, pp. 976 - 983.
2. R. Errath, P. Burmeister, A. Sapin, "SAG mill operation with weak network conditions", Intl. Conf. On SAG grinding, SAG2001, Vancouver, Canada, 2001.
3. C. Meimaris, B. Lai, L. Cox, "Remedial design of the world's largest SAG mill gearless drive", Intl. Conf. On SAG grinding, SAG2001, Vancouver, Canada, 2001.
4. H. Kümmlee, P. Meinke, "A mechatronic solution design and experience with large gearless mill drives", Intl. Conf. On SAG grinding, SAG2001, Vancouver, Canada, 2001.
5. F.M. Riezinger, J. Knecht, N. Patzelt, R. Errath, "How big is big", Intl. Conf. On SAG grinding, SAG2001, Vancouver, Canada, 2001.
6. J. Rodríguez, J. Pontt, P. Newman, R. Musalem, "Technical Evaluation and Practical Experience of High-Power Grinding Mill Drives in Mining Applications", IEEE Trans. On Ind. Appl., Vol. 41, No.3, May/June 2005, pp. 866-874.
7. J. Pontt, J. Rodriguez, J. Rebolledo, K. Tischler, N. Becker "Operation of High-Power Cycloconverter-Fed Gearless Drives Under Abnormal Conditions", IEEE Trans. On Industry Applications, Vol. 43, No. 3, May/June 2007, pp. 814-820.
8. J. Rodriguez, B. Wu, S. Bernet, N. Zargari, J. Rebolledo, J. Pontt, P. Steimer, "Design and Evaluation Criteria for High Power Drives", Proc. of IEEE-IAS Annual Meeting 2008, IAS'08, Oct.5-9, 2009, pp. 1-9.
9. R. Errath, P. Burmeister, A. Sapin, "SAG mill operation with weak network conditions," International Conference on SAG grinding, SAG2001, Vancouver, Canada, 2001. CD Rom.
10. J. Pontt, J. Rodríguez, W. Valderrama, G. Sepúlveda, G. Alzamora. "Resonance Effects, Power Quality and Reliability Issues of High-Power Converters-Fed Drives Employed in Modern SAG Circuits", Special issue on Comminution, Minerals Engineering, Nov. 2004, Vol. 17, Issue 11-12, pp. 1125-1134.
11. J. Rodriguez, J. Pontt, C. Silva, R. Musalem, P. Newman, R.Vargas, S. Fuentes, "Resonances and Overvoltages in a Medium Voltage fan motor drive with long cables in an underground mine", IEEE Trans. On Ind. Appl., Vol. 42, Nr. 3, May-June 2006, pp. 856-863.
12. M. Kaufhold et Al, "Electrical Stress and Failure Mechanism of the Winding Insulation in PWM-Inverter-Fed Low-Voltage Induction Motors", IEEE Trans. on Ind. Electronics, Vol.47, Nr.2, April 2000, pp. 396-402.
13. S.R. Cambell, G.C. Stone, "Examples of Stator winding Partial Discharge due to Inverter Drives", Proceedings of IEEE - Int'l Symposium on Electrical Insulation, ISEI 2000, Anaheim, April, 2-5, 2000, pp. 231-234.
14. D. Fabiani, G.C., Montanari, "The effect of voltage distortion on ageing acceleration of insulation systems under PD activity", IEEE Electrical Insulation Magazine, Vol. 17, Nr. 3, May/June 2001, pp. 24-33.
15. V. Maughan, P.E. Clyde, "Partial Discharge-A Valuable Stator Winding Evaluation Tool", Conference Record of the 2006 IEEE International Symp. on Electrical Insulation, 2006., 11-14 June 2006, pp. 388-391.
16. A. Kheirmand, M. Leijon, S. M. Gubanski, Advances in Online Monitoring and Localization of Partial Discharges in Large Rotating Machines, IEEE Trans. On Energy Conversion, Vol. 19, No. 1, March 2004, pp. 53-59.
17. J. Rodríguez, L. Morán, J. Pontt, R. Osorio and S. Kouro, "Modeling and Analysis of Common-Mode Voltages Generated in Medium Voltage PWM-CSI Drives", IEEE Trans. On Power Electronics, Vol.18, Nr.3, May, 2003, pp.873-879.
18. J. Pontt, J. Rodriguez, W. Valderrama, G. Sepulveda, P. Chavez, B. Cuitiño, P. Gonzalez, G. Alzamora, "Current issues on high-power cycloconverter-fed gearless motor drives for grinding mills", in Proc. IEEE Int. Symp. On Industrial Electronics, Vol.1, 9-11 June, 2003, pp.369-374.
19. G. Stone, E.A. Boulter, I. Culbert, H. Dhirani, "Electrical Insulation for Rotating Machines", Wiley, IEEE Press, 2004, pp.137-180.
20. nd Edition, Wiley, IEEE Press, 2008, pp. 251-331.
21. IEC-60034-27, "Rotating Electrical Machnies - Part 27: Off-Line Partial Discharge measurements on the stator winding insulation of rotating electrical machines", 2006.
22. IEEE Std. 1434-2000, "Trial-Use Guide to the Measurement of Partial Discharges in Rotating Machinery", April, 2000.
23. IEEE Std 95-1997, "Recommended Practice for Insulation Testing of Large AC Rotating Machinery with High Direct Voltage, November, 1977.
24. IEEE Std. 43-2000, Recommended Practice for Testing Insulation Resistance of Rotating Machinery, October, 2000.
25. IEC 71-1, "Insulation Coordination", Part.1, 1993.
26. D. Almond, G. Sepulveda, "Load impact management in an operatinal SAG mill using advanced performance enhancement instrumentation", Int'l Conf. On SAG Grinding, SAG'06, Vancouver, Canada. CD Rom.
27. J. Pontt, W. Valderrama, L. Magne, G. Sepulveda, P. Espinoza, "New method for detection of harmful impacts on shell liners in large grinding mills", IEEE Int'l Conf. On Measurement Technoloies and Control IMTC'04, Como, Italy, May, 18-20, 2004.
28. J. Pontt, J.Rodriguez, J. San Martín, R. Aguilera, J. Rebolledo, E. Caceres, I. Illanes. P. Newman, Interharmonic currents assessment in high-power cycloconverter-fed drives. PESC'06, IEEE Power Electronics Specialists Conference. Jeju, Korea. 2006.
29. C. Azuaje, A. Millan, "Stator Deformation of Large Hydrogenerators and Its Effects on the Machines", Proc. Of Transmission & Distribution Conference and Exposition: Latin America, 2006. TDC '06. IEEE/PES, 15-18, Aug., 2006, pp.1-5.
30. K. Sawatani, K. Sano, S. Ootake, "Stator Frame Deformation Problem in Large Diameter Hydro-Generators", IEEE Trans. On Energy conversion, March 1986, Vol. EC-1, Nr.1, pp.33-38.
31. D.G. Almond, G. Sepulveda, "Load Mangement in an operational SAG mill using advanced performance enhancemente instrumentation", Intl. Conf. On SAG grinding, SAG2006, Vancouver, Canada, 2006, CD Rom, pp.III-351-III-361.
32. P. Warner, "Vibration, Instability and Resonant Speed Issues in Gearless Mill Drives", Intl. Conf. On SAG grinding, SAG2006, Vancouver, Canada, 2006, CD Rom, pp.II-186 - II-201.
33. H. Srysl, H. Vögele, G. Ebi, "The influence of Magnetic forces on the Stability Behavor of Large Electrical Machines", VDI Berichte Nr. 1285, 1996, pp.1-10. Availanble: www.sensoplan.com/downloads/publication/VDI- Nr1285-eng.pdf
34. C. Meimaris, B.Lai, B.F.Prce, S. Manchanda, "How big is big? Revisited", Intl. Conf. On SAG grinding, SAG2006, Vancouver, Canada, 2006, CD Rom, pp.II-11 - II-25.
35. P. Gunn, "Problem definition and repair of the rotor pole structure on one of the world's largest gearless drive SAG mils", Intl. Conf. On SAG grinding, SAG2006, Vancouver, Canada, 2006, CD Rom.
36. J. Pontt, "MONSAG: A New Monitoring System for Measuring the Load Filling of a SAG Mill", Special issue on Comminution, Minerals Engineering, Nov. 2004, Vol. 17, Issue 11-12, pp. 1143-1148.
37. J.Pontt et Al, "Issues on Reliability of Cycloconverter-Fed High-Power Gearless Mill", Int'l Cnference on Comminution, Comminution'06, Perth, Australia, March 15-17, 2006.
38. th IAS Annual Meeting of IEEE Industry Applications Conference, Hong Kong, Oct., 2005, Volume 1, 2-6 Oct. 2005, pp. 645-649.