Optimal torque control of synchronous machines based on finite-element analysis

IEEE Transactions on Industrial Electronics

Volumn 57, Issue 1, 2010, Pages 413-419

  De Kock, Hugo W ^a   Rix, Arnold J ^b   Kamper, Maarten J ^b  

^a Optimal Energy   (South Africa)

^b STELLENBOSCH UNIVERSITY   (South Africa)

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMATED PROCESS; BASE SPEED; CONTROL STRATEGIES; CROSS-COUPLINGS; FE ANALYSIS; FIELD-WEAKENING; FINITE ELEMENT ANALYSIS; FINITE-ELEMENT; GENERIC METHOD; NONLINEAR EFFECT; OFFLINE; ON-MACHINES; OPTIMAL TORQUE CONTROL; PRACTICAL IMPLEMENTATION; RELUCTANCE SYNCHRONOUS MACHINE; SPEED RANGE; SYNCHRONOUS MACHINE; VOLTAGE CONDITIONS;

AUTOMATION; DIGITAL SIGNAL PROCESSORS; SIGNAL PROCESSING; TORQUE CONTROL;

COUPLINGS;

EID: 72749100035     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2009.2030209     Document Type: Article

References (34)

1. H. de Kock, A. J. Rix, and M. J. Kamper, "Optimal torque control of interior permanent magnet synchronous machines in the full speed range," in Proc. ICEM, 2008, pp. 1-6.
2. H. de Kock, "Position sensorless and optimal torque control of reluctance and permanent magnet synchronous machines," Ph.D. dissertation, Stellenbosch Univ., Stellenbosch, South Africa, 2009.
3. M. J. Kamper, F. S. Van der Merwe, and S. Williamson, "Direct finite element design optimisation of the cageless reluctance synchronous machine," IEEE Trans. Energy Convers., vol.11, no.3, pp. 547-555, Sep. 1996.
4. A. Consoli, F. Russo, G. Scarcella, and A. Testa, "Low- and zero-speed sensorless control of synchronous reluctance motors," IEEE Trans. Ind. Appl., vol.35, no.5, pp. 1050-1057, Sep./Oct. 1999.
5. P. Guglielmi, M. Pastorelli, G. Pellegrino, and A. Vagati, "Positionsensorless control of permanent-magnet-assisted synchronous reluctance motor," IEEE Trans. Ind. Appl., vol.40, no.2, pp. 615-622, Mar./Apr. 2004.
6. N. Bianchi, S. Bolognani, J.-H. Jang, and S.-K. Sul, "Comparison of PM motor structures and sensorless control techniques for zero-speed rotor position detection," in Proc. 37th IEEE PESC, 2006, pp. 1-7.
7. A. Consoli, G. Scarcella, G. Scelba, A. Testa, and D. Triolo, "Sensorless rotor position estimation in synchronous reluctance motors exploiting a flux deviation approach," IEEE Trans. Ind. Appl., vol.43, no.5, pp. 1266-1273, Sep./Oct. 2007.
8. H. de Kock, M. J. Kamper, O. Ferreira, and R. Kennel, "Position sensorless control of the reluctance synchronous machine considering high frequency inductances," in Proc. PEDS, 2007, pp. 812-821.
9. H. de Kock, M. J. Kamper, and R. Kennel, "Anisotropy comparison of reluctance and PM synchronous machines for low speed position sensorless applications," in Proc. 13th Int. Conf. EPE-PEMC, 2008, pp. 859-866.
10. N. Imai, S. Morimoto, M. Sanada, and Y. Takeda, "Influence of magnetic saturation on sensorless control for interior permanent-magnet synchronous motors with concentrated windings," IEEE Trans. Ind. Appl., vol.42, no.5, pp. 1193-1200, Sep./Oct. 2006.
11. M. Rahman, L. Zhong, and W. Lim, "A direct torque-controlled interior permanent magnet synchronous motor drive incorporating field weakening," IEEE Trans. Ind. Appl., vol.34, no.6, pp. 1246-1253, Nov./Dec. 1998.
12. H.-D. Lee, S.-J. Kang, and S.-K. Sul, "Efficiency-optimized direct torque control of synchronous reluctance motor using feedback linearization," IEEE Trans. Ind. Electron., vol.46, no.1, pp. 192-198, Feb. 1999.
13. L. Zhong, M. Rahman, W. Hu, K. Lim, and M. Rahman, "A direct torque controller for permanent magnet synchronous motor drives," IEEE Trans. Energy Convers., vol.14, no.3, pp. 637-642, Sep. 1999. (Pubitemid 30528639)
14. M. Haque, L. Zhong, and M. Rahman, "A sensorless initial rotor position estimation scheme for a direct torque controlled interior permanent magnet synchronous motor drive," IEEE Trans. Power Electron., vol.18, no.6, pp. 1376-1383, Nov. 2003.
15. L. Tang, L. Zhong, M. Rahman, and Y. Hu, "A novel direct torque controlled interior permanent magnet synchronous machine drive with low ripple in flux and torque and fixed switching frequency," IEEE Trans. Power Electron., vol.19, no.2, pp. 346-354, Mar. 2004.
16. M. Pacas and J. Weber, "Predictive direct torque control for the PM synchronous machine," IEEE Trans. Ind. Electron., vol.52, no.5, pp. 1350-1356, Oct. 2005. (Pubitemid 41489378)
17. K. Gulez, A. Adam, and H. Pastaci, "A novel direct torque control algorithm for IPMSM with minimum harmonics and torque ripples," IEEE/ASME Trans. Mechatronics, vol. 12, no. 2, pp. 223-227, Apr. 2007.
18. Z. Xu and M. Rahman, "Direct torque and flux regulation of an IPM synchronous motor drive using variable structure control approach," IEEE Trans. Power Electron., vol. 22, no. 6, pp. 2487-2498, Nov. 2007.
19. T. Geyer, G. Papafotiou, and M. Morari, "Model predictive direct torque control-Part I: Concept, algorithm, and analysis," IEEE Trans. Ind. Electron., vol.56, no.6, pp. 1894-1905, Jun. 2009.
20. G. Papafotiou, J. Kley, K. Papadopoulos, P. Bohren, and M. Morari, "Model predictive direct torque control-Part II: Implementation and experimental evaluation," IEEE Trans. Ind. Electron., vol.56, no.6, pp. 1906-1915, Jun. 2009.
21. S. Morimoto, M. Sanada, and Y. Takeda, "Wide-speed operation of interior permanent magnet synchronous motors with high-performance current regulator," IEEE Trans. Ind. Appl., vol.30, no.4, pp. 920-926, Jul./Aug. 1994.
22. S.-K. Chung, H.-S. Kim, C.-G. Kim, and M.-J. Youn, "A new instantaneous torque control of PM synchronous motor for high-performance direct-drive applications," IEEE Trans. Power Electron., vol.13, no.3, pp. 388-400, May 1998.
23. F.-J. Lin and R.-J. Wai, "A hybrid computed torque controller using fuzzy neural network for motor-quick-return servo mechanism," IEEE/ASME Trans. Mechatronics, vol.6, no.1, pp. 75-89, Mar. 2001.
24. R. Monajemy and R. Krishnan, "Control and dynamics of constant-powerloss-based operation of permanent-magnet synchronous motor drive system," IEEE Trans. Ind. Electron., vol.48, no.4, pp. 839-844, Aug. 2001.
25. B.-H. Bae, N. Patel, S. Schulz, and S.-K. Sul, "New field weakening technique for high saliency interior permanent magnet motor," in Conf. Rec. 38th IEEE IAS Annu. Meeting, 2003, vol.2, pp. 898-905.
26. C.-T. Pan and S.-M. Sue, "A linear maximum torque per ampere control for IPMSM drives over full-speed range," IEEE Trans. Energy Convers., vol.20, no.2, pp. 359-366, Jun. 2005.
27. M. Bech, T. Frederiksen, and P. Sandholdt, "Accurate torque control of saturated interior permanent magnet synchronous motors in the fieldweakening region," in Conf. Rec. 40th IEEE IAS Annu. Meeting, 2005, vol.4, pp. 2526-2532.
28. Y.-R. Mohamed, "A newly designed instantaneous-torque control of direct-drive PMSM servo actuator with improved torque estimation and control characteristics," IEEE Trans. Ind. Electron., vol.54, no.5, pp. 2864-2873, Oct. 2007.
29. R. Morales-Caporal and M. Pacas, "A predictive torque control for the synchronous reluctance machine taking into account the magnetic cross saturation," IEEE Trans. Ind. Electron., vol.54, no.2, pp. 1161-1167, Apr. 2007. (Pubitemid 46591036)
30. A. Consoli, G. Scarcella, G. Scelba, S. Sindoni, and A. Testa, "Steadystate and transient analysis of maximum torque per ampere control for IPMSMS," in Conf. Rec. IEEE IAS Annu. Meeting, 2008, pp. 1-8.
31. L. Serrano-Iribarnegaray and J. Martinez-Roman, "A unified approach to the very fast torque control methods for DC and AC machines," IEEE Trans. Ind. Electron., vol.54, no.4, pp. 2047-2056, Aug. 2007.
32. F. Morel, J.-M. Retif, X. Lin-Shi, and C. Valentin, "Permanent magnet synchronous machine hybrid torque control," IEEE Trans. Ind. Electron., vol.55, no.2, pp. 501-511, Feb. 2008.
33. A. J. Rix, M. J. Kamper, and R.-J. Wang, "Design and performance evaluation of concentrated coil permanent magnet machines for inwheel drives," in Proc. IEEE IEMDC, M. J. Kamper, Ed., 2007, vol.1, pp. 770-775.
34. H. de Kock and M. J. Kamper, "Dynamic control of the permanent magnet-assisted reluctance synchronous machine," IET Elect. Power Appl., vol.1, no.2, pp. 153-160, Mar. 2007.