Observer-based inverter disturbance compensation

2009 IEEE Energy Conversion Congress and Exposition, ECCE 2009

Volumn , Issue , 2009, Pages 2520-2527

  Yuan, Xinmei ^a   Brown, Ian ^b   Lorenz, Robert D ^b   Qui, Arui ^a  

^a TSINGHUA UNIVERSITY   (China)

^b UNIVERSITY OF WISCONSIN MADISON   (United States)

Author keywords

DC offset; Disturbance observer; High frequency injection; Induction motor; Inverter disturbance

Indexed keywords

CLOSED-LOOP; COMPENSATION SYSTEMS; DC OFFSETS; DISTURBANCE COMPENSATION; DISTURBANCE ESTIMATION; DISTURBANCE OBSERVER; HIGH-FREQUENCY INJECTION; OPEN LOOPS; SELF-SENSING; SWITCHING DEVICES; VOLTAGE DISTURBANCES;

ENERGY CONVERSION; INDUCTION MOTORS; MOTORS;

UNCERTAINTY ANALYSIS;

EID: 72449172928     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ECCE.2009.5316413     Document Type: Conference Paper

References (19)

1. A. R. Munoz, and T. A. Lipo, "On-line dead-time compensation technique for open-loop PWM-VSI drives," IEEE Trans. on Power Electronics, vol. 14, no. 4, pp. 683-689, 1999.
2. J. Holtz, and Q. Juntao, "Sensorless vector control of induction motors at very low speed using a nonlinear inverter model and parameter identification," IEEE Trans. on Industry Appl., vol. 38, no. 4, pp. 1087-1095, 2002.
3. N. Urasaki, T. Senjyu, T. Kinjo et al., "Dead-time compensation strategy for permanent magnet synchronous motor drive taking zero-current clamp and parasitic capacitance effects into account," IEE Proceedings-Electric Power Appl., vol. 152, no. 4, pp. 845-853, 2005.
4. C. Chan-Hee, and S. Jul-Ki, "Compensation of Zero-Current Clamping Effects in High-Frequency-Signal-Injection-Based Sensorless PM Motor Drives," IEEE Trans. on Industry Appl., vol. 43, no. 5, pp. 1258-1265, 2007.
5. J. M. Guerrero, M. Leetmaa, F. Briz et al., "Inverter nonlinearity effects in high-frequency signal-injection-based sensorless control methods," IEEE Trans. on Industry Appl., vol. 41, no. 2, pp. 618-626, 2005.
6. P. Shihong, and T. M. Jahns, "A novel dead-time elimination method using single-input enhanced phase-leg configuration." Proc. of IEEE Industry Applications Conf., vol.3, pp. 2033-2040, 2003.
7. C. Lihua, and P. Fang Zheng, "Dead-Time Elimination for Voltage Source Inverters," IEEE Trans. on Power Electronics, vol. 23, no. 2, pp. 574-580, 2008.
8. J. Seung-Gi, and P. Min-Ho, "The analysis and compensation of dead-time effects in PWM inverters," IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 108-114, 1991.
9. Y. Inoue, K. Yamada, S. Morimoto et al., "Effectiveness of Voltage Error Compensation and Parameter Identification for Model-Based Sensorless Control of IPMSM," IEEE Trans. on Industry Appl., vol. 45, no. 1, pp. 213-221, 2009.
10. K. Hag-Wone, Y. Myung-Joong, C. Kwan-Yuhl et al., "Nonlinearity estimation and compensation of PWM VSI for PMSM under resistance and flux linkage uncertainty," IEEE Trans. on Control Systems Technology, vol. 14, no. 4, pp. 589-601, 2006.
11. F. Blaabjerg, J. K. Pedersen, and P. Thoegersen, "Improved modulation techniques for PWM-VSI drives," IEEE Trans. on Industrial Electronics, vol. 44, no. 1, pp. 87-95, 1997.
12. C. Chan-Hee, C. Kyung-Rae, and S. Jul-Ki, "Inverter Nonlinearity Compensation in the Presence of Current Measurement Errors and Switching Device Parameter Uncertainties," IEEE Trans. on Power Electronics, vol. 22, no. 2, pp. 576-583, 2007.
13. K. Hyun-Soo, K. Kyeong-Hwa, and Y. Myung-Joong, "On-line dead-time compensation method based on time delay control," IEEE Trans. on Control Systems Technology, vol. 11, no. 2, pp. 279-285, 2003.
14. N. Urasaki, T. Senjyu, K. Uezato et al., "An adaptive dead-time compensation strategy for voltage source inverter fed motor drives," IEEE Trans. on Power Electronics, vol. 20, no. 5, pp. 1150-1160, 2005.
15. R. W. Hejny, "Degradation of Dynamic Stiffness at Low Speeds When Using Back-emf Tracking for Closed Loop Speed Control," MS ECE Thesis, University of Wisconsin - Madison, Madison, WI, 2008.
16. K. Hyunbae, M. C. Harke, and R. D. Lorenz, "Sensorless control of interior permanent-magnet machine drives with zero-phase lag position estimation," IEEE Trans. on Industry Appl., vol. 39, no. 6, pp. 1726-1733, 2003.
17. D. W. Novotny, and T. A. Lipo, Vector Control and Dynamics of AC Drives, New York: Oxford Univ. Press, 1996.
18. P. L. Jansen, and R. D. Lorenz, "A physically insightful approach to the design and accuracy assessment of flux observers for field oriented induction machine drives," IEEE Trans. on Industry Appl., vol. 30, no. 1, pp. 101-110, 1994.
19. P. L. Jansen, "The Integration of State Estimation, Control, and Design for Induction Machines," Ph.D. Dissertation, ECE, University of Wisconsin-Madison, Madison, WI, 1993.