Modeling of continuous dynamic recrystallization in commercial-purity aluminum

Materials Science and Engineering: A

Volumn 527, Issue 4-5, 2010, Pages 1126-1134

  Hallberg, Håkan ^a   Wallin, Mathias ^a   Ristinmaa, Matti ^a  

^a LUND UNIVERSITY   (Sweden)

Author keywords

AA1050; Aluminum; ECAP; Equal channel angular pressing; Recrystallization; Viscoplasticity

Indexed keywords

ALUMINUM; CONSTITUTIVE MODELS; DYNAMIC RECRYSTALLIZATION; GRAIN REFINEMENT; GRAIN SIZE AND SHAPE;

AA1050; COMMERCIAL PURITY ALUMINUM; CONTINUOUS DYNAMIC RECRYSTALLIZATION; DISLOCATIONS DENSITIES; ECAP; GRAINS REFINEMENT; GRAINSIZE; INELASTIC DEFORMATION; RATE-DEPENDENCE; RECRYSTALLISATION;

EQUAL CHANNEL ANGULAR PRESSING;

EID: 72249120865     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2009.09.043     Document Type: Article

References (61)

1. Gourdet S., and Montheillet F. An experimental study of the recrystallization mechanism during hot deformation of aluminium. Materials Science and Engineering A283 (2000) 274-288
2. Kassner M.E., and Barrabes S.R. New developments in geometric dynamic recrystallization. Materials Science and Engineering A410-411 (2005) 152-155
3. Mazurina I., Sakai T., Miura H., Sitdikov O., and Kaibyshev R. Effect of deformation temperature on microstructure evolution in aluminum alloy 2219 during hot ECAP. Materials Science and Engineering A486 (2008) 662-671
4. Sakai T., Miura H., and Yang X. Ultrafine grain formation in face centered cubic metals during severe plastic deformation. Materials Science and Engineering A499 (2009) 2-6
5. Kaibyshev R.O., Mazurina I.A., and Gromov D.A. Mechanisms of grain refinement in aluminum alloys in the process of severe plastic deformation. Metal Science and Heat Treatment 48 1-2 (2006) 57-62
6. Liu C., Jiang S., and Zhang X. Continuous dynamic recrystallization and discontinuous dynamic recrystallization in 99.99% polycrystalline aluminum during hot compression. Transactions of Nonferrous Metals Society of China 15 1 (2005) 82-86 February
7. Yamagata H., Ohuchida Y., Saito N., and Otsuka M. Nucleation of new grains during discontinuous dynamic recrystallization of 99.998 mass% Aluminum at 453 K. Scripta Materialia 45 (2001) 1055-1061
8. Cao W.Q., Godfrey A., Liu W., and Liu Q. Annealing behavior of aluminium deformed by equal channel angular pressing. Materials Letters 57 (2003) 3767-3774
9. Gourdet S., and Montheillet F. A model of continuous dynamic recrystallization. Acta Materialia 51 (2003) 2685-2699
10. Kocks U.F. Laws for Work-Hardening and Low-Temperature Creep. Journal of Engineering Materials and Technology 98 1 (1976) 76-85 January
11. Mecking H., and Kocks U.F. Kinetics of flow and strain-hardening. Acta Metallurgica 29 (1981) 1865-1875
12. Voyiadjis G.Z., and Abed F.H. Microstructural based models for bcc and fcc metals with temperature and strain rate dependency. Mechanics of Materials 37 (2005) 355-378
13. Estrin Y., and Kim H.S. Modelling microstructure evolution toward ultrafine crystallinity produced by severe plastic deformation. Journal of Materials Science 42 (2007) 1512-1516
14. Schwaiger R., Moser B., Dao M., Chollacoop N., and Suresh S. Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel. Acta Materialia 51 (2003) 5159-5172
15. Emery R.D., and Povirk G.L. Tensile behavior of free-standing gold films. Part II. Fine-grained films. Acta Materialia 51 (2003) 2079-2987
16. May J., Höppel H.W., and Göken M. Strain rate sensitivity of ultrafine-grained aluminum processed by severe plastic deformation. Scripta Materialia 53 (2005) 189-194
17. Miyamoto H., Ota K., and Mimaki T. Viscous nature of deformation of ultra-fine grain aluminum processed by equal-channel angular pressing. Scripta Materalia 54 (2006) 1721-1725
18. Estrin Y., and Mecking H. A unified phenomenological description of work hardening and creep based on one-parameter models. Acta Metallurgica 32 1 (1984) 57-70
19. Humphreys F.J., and Hatherly M. Recrystallization and related annealing phenomena. second edition (1996), Pergamon, New York
20. Molodov D.A., Konijnenberg P., Hu W., Gottstein G., and Shvindlerman L.S. Effect of dislocation absorption on the motion of specific grain boundaries in Al-bicrystals. Acta Materialia 45 (2001) 229-235
21. De Hosson J.T.M., Soer W.A., Minor A.M., Shan Z., Stach E.A., Asif S.A.S., and Warren O.L. In situ TEM nanoindentation and dislocation-grain boundary interactions: a tribute to David Brandon. Journal of Materials Science 41 (2006) 7704-7719
22. Segal V.M., Reznikov V.I., Drobyshevskiy A.E., and Kopylov V.I. Plastic working of metals by simple shear. Russian Metallurgy 1 (1981) 99-105
23. Valiev R.Z., and Langdon T.G. Principles of equal-channel angular pressing as a processing tool for grain refinement. Progress in Materials Science 51 (2006) 881-981
24. Langdon T.G. The principles of grain refinement in equal-channel angular pressing. Materials Science and Engineering A462 (2007) 3-11
25. Iwahashi Y., Wang J., Horita Z., and Nemoto M. Principles of equal-channel angular pressing for the processing of ultra-fine grained materials. Scripta Materialia 35 2 (1996) 143-146
26. Kim H.K., and Kim W.J. Microstructural instability and strength of an AZ31Mg alloy after severe plastic deformation. Materials Science and Engineering A385 (2004) 300-308
27. Zhilyaev A.P., Oh-ishi K., Raab G.I., and McNelley T.R. Influence of ECAP processing parameters on texture and microstructure of commercially pure aluminum. Materials Science and Engineering A441 (2006) 245-252
28. Skrotzki W., Scheerbaum N., Oertel C.-G., Brokmeier H.-G., Suwas S., and Tóth L.S. Recrystallization of high-purity aluminum during equal channel angular pressing. Acta Materialia 55 (2007) 2211-2218
29. Doherty R.D., Hughes D.A., Huphreys F.J., Jonas J.J., Juul Jensen D., Kassner M.E., King W.E., McNelley T.R., McQueen H.J., and Rollett A.D. Current issues in recrystallization: a review. Materials Science and Engineering A238 (1997) 219-274
30. Derby B. The dependence of grain size on stress during dynamic recrystallization. Acta Metallurgica et Materialia 39 5 (1991) 955-962
31. Derby B. Dynamic recrystallization: The steady state grain size. Scripta Metallurgica et Materialia 27 (1992) 1581-1586
32. Busso E.P. A continuum theory for dynamic recrystallization with microstructurerelated length scales. International Journal of Plasticity 14 4-5 (1998) 319-353
33. Cerri E., Evangelista E., Forcellese A., and McQueen H.J. Comparative hot workability of 7012 and 7075 alloys after different pretreatments. Materials Science and Engineering A197 (1995) 181-198
34. Semiatin S.L., Berbon P.B., and Langdon T.G. Deformation heating and its effect on grain size evolution during equal channel angular extrusion. Scripta Materialia 44 (2001) 135-140
35. Cabibbo M., Evangelista E., and Latini V. Thermal stability study on two aluminum alloys processed with equal channel angular pressing. Journal of Materials Science 39 (2004) 5659-5667
36. Kim Y.G., Hwang B., Lee S., Kim W.G., and Shin D.H. Dynamic deformation and fracture behavior of ultrafine-grained aluminum alloy fabricates by equal-channel angular pressing. Metallurgical and Materials Transactions A 36A (2005) 2947-2955 November
37. Morris D.G., and Muños-Morris M.A. Microstructure of severely deformed Al-3Mg and its evolution during annealing. Acta Materialia 50 (2002) 4047-4060
38. Poortmans S., and Verlinden B. Mechanical properties of fine-grained AA1050 after ECAP. Materials Science Forum 503-504 (2000) 847-852
39. McQueen H.J., and Hockett J.E. Microstructures of Aluminum compressed at various rates and temperatures. Metallurgical Transactions 1 (1970) 2997-3004 November
40. Ottosen N.S., and Ristinmaa M. The Mechanics of Constitutive Modeling. first edition (2005), Elsevier
41. El-Danaf E.A., Soliman M.S., Almajid A.A., and El-Rayes M.M. Enhancement of mechanical properties and grain size refinement of commercial purity aluminum 1050 processed by ECAP. Materials Science and Engineering A458 (2007) 226-234
42. Kovács-Csetényi E., Horváth M., Chinh N.Q., and Kovács I. Effect of grain size on tensile stress and ductility in Al99.99. Physica Status Solidi A166 (1998) 805-810
43. Hasegawa H., Komura S., Utsunomiya A., Horita Z., Furukawa M., Nemoto M., and Langdon T.G. Thermal stability of ultrafine-grained aluminum in the presence of Mg and Zr additions. Materials Science and Engineering A265 (1999) 188-196
44. Kovács I., Chinh N.Q., and Kovács-Csetényi E. Grain size dependence of the work hardening process in Al99.99. Physica Status Solidi A194 1 (2002) 3-18
45. Estrin Y. Dislocation theory based constitutive modelling: foundations and applications. Journal of Materials Processing Technology 80-81 (1998) 33-39
46. L. Capolungo Modeling of the size effect in the plastic behavior of polycrystalline materials. PhD thesis, Georgia Institute of Technology, 2007.
47. L. Barbé Physical Metallurgy of P-alloyed TRIP Steels. PhD thesis, University of Gent, 2006.
48. Chinh N.Q., Hrováth G., Horita Z., and Langdon T.G. A new constitutive relationship for the homogeneous deformation of metals over a wide range of strain. Acta Materialia 52 (2004) 3555-3563
49. May J., Amberger D., Dinkel M., Höppel H.W., and Göken M. Monotonic and cyclic deformation behaviour of ultrafine-grained aluminium. Materials Science and Engineering A483-484 (2008) 481-484
50. Wei Q., Cheng S., Ramesh K.T., and Ma E. Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals. Materials Science and Engineering A381 (2004) 71-79
51. Dalla Torre F.H., Pereloma E.V., and Davies C.H.J. Strain hardening behaviour and deformation kinetics of Cu deformed by equal channel angular extrusion from 1 to 16 passes. Acta Materialia 54 (2006) 1135-1146
52. Li Y.J., Zeng X.H., and Blum W. Transition from strengthening to softening by grain boundaries in ultrafine-grained Cu. Acta Materialia 52 (2004) 5009-5018
53. Hollang L., Hieckmann E., Brunner D., Holste C., and Skrotzki W. Scaling effects in the plasticity of nickel. Materials Science and Engineering A424 (2006) 138-153
54. Perzyna P. Fundamental problems in viscoplasticity. Advances in Applied Mechanics 9 (1966) 243-377
55. Ristinmaa M., and Ottosen N.S. Consequences of dynamic yield surface in viscoplasticity. International Journal of Solids and Structures 37 (2000) 4601-4622
56. Wallin M., and Ristinmaa M. Deformation gradient based kinematic hardening model. International Journal of Plasticity 21 (2005) 2025-2050
57. Hallberg H., Ryttberg K., and Ristinmaa M. Model describing material-dependent deformation behavior in high velocity metal forming processes. ASCE Journal of Engineering Mechanics 135 4 (2009) 345-357
58. Li S., Bourke M.A.M., Beyerlein I.J., Alexander D.J., and Clausen B. Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion. Materials Science and Engineering A382 (2004) 217-236
59. Kim H.S. Finite element analysis of deformation behaviour of metals during equal channel multi-angular pressing. Materials Science and Engineering A328 (2002) 317-322
60. Cao W.Q., Godfrey A., and Liu Q. EBSP investigation of microstructure and texture evolution during equal channel angular pressing of aluminium. Materials Science and Engineering A361 (2003) 9-14
61. Qiao X.G., Starink M.J., and Gao N. Hardness inhomogeneity and local strengthening mechanisms of an Al1050 aluminium alloy after one pass of equal channel angular pressing. Materials Science and Engineering A513-514 (2009) 52-58