Preparation of well-defined blackberry-like polypyrrole/fly ash composite microspheres and their electrical conductivity and magnetic properties

Current Opinion in Solid State and Materials Science

Volumn 13, Issue 5-6, 2009, Pages 112-118

  Yang, Chao ^a   Wang, Tingmei ^b   Liu, Peng ^a   Shi, Huigang ^c   Xue, Desheng ^c  

^a LANZHOU UNIVERSITY   (China)

^b LANZHOU INSTITUTE OF CHEMICAL PHYSICS   (China)

^c LANZHOU UNIVERSITY   (China)

Author keywords

Blackberry like morphology; Conductivity; Fly ash; Magnetic properties; Polypyrrole

Indexed keywords

AMINO GROUP; BLACKBERRY-LIKE MORPHOLOGY; CHEMICAL OXIDATIVE POLYMERIZATION; COMPOSITE MICROSPHERES; CONDUCTIVITY; ELECTRICAL CONDUCTIVITY; FUNCTIONALIZED; HIGH ELECTRICAL CONDUCTIVITY; IN-SITU; RETARDATION EFFECT; ROOM TEMPERATURE; SEM; SIMILAR PATTERN; SIZE RANGES; SURFACE FUNCTIONALIZATION; TEMPERATURE DEPENDENCE; THERMAL STABILITY;

AMINATION; AMINES; CHEMICAL ANALYSIS; CRYSTAL STRUCTURE; DEGRADATION; ELECTRIC CONDUCTIVITY; FLUORINE CONTAINING POLYMERS; FLY ASH; FUNCTIONAL POLYMERS; MAGNETIC PROPERTIES; MORPHOLOGY; PHOTODEGRADATION; POLYMERIZATION; POLYMERS; POLYPYRROLES; SCANNING ELECTRON MICROSCOPY; THERMODYNAMIC STABILITY; THERMOGRAVIMETRIC ANALYSIS; X RAY DIFFRACTION; X RAY DIFFRACTION ANALYSIS;

CONDUCTING POLYMERS;

EID: 72049093445     PISSN: 13590286     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cossms.2009.06.002     Document Type: Article

References (46)

1. Rostami H., and Brendley W. Environ Sci Technol 37 (2003) 3454-3457
2. Blaha U., Sapkota B., Appel E., Stanjek H., and Rösler W. Atmos Environ 42 (2008) 8359-8370
3. Saraswathy V., Muralidharan S., Thangavel K., and Srinivasan S. Adv Cement Res 14 (2002) 9-16
4. Berryman C., Zhu J., Jensen W., and Tadros M. Cem Concr Res 35 (2005) 1088-1091
5. Amritphale S.S., Anshul A., Chandra N., and Ramakrishnan N. J Eur Ceram Soc 27 (2007) 4639-4647
6. Jala S., and Goyal D. Bioresource Technol 97 (2006) 1136-1146
7. Alinnor I.J. Fuel 86 (2007) 853-857
8. Diamadopoulos E., Ioannidis S., and Sakellaropoulos G.P. Water Res 27 (2006) 1773-1777
9. Lataye D.H., Mishra I.M., and Mall I.D. Chem Eng J 138 (2008) 35-46
10. Xuan X., Yue C., Li S., and Yao Q. Fuel 82 (2003) 575-579
11. Kolar P., and Kastner P.P. Miller J Appl Catal B Environ 76 (2007) 203-217
12. Wang S. Environ Sci Technol 42 (2008) 7055-7063
13. Kishore, Kulkarni S.M., Sunil D., and Sharathchandra S. Polym Int 51 (2002) 1378-1384
14. Sombatsompop N., Thongsang S., Markpint T., and Wimolmala E. J Appl Polym Sci 93 (2004) 2119-2130
15. Ramakrishna H.V., Priya S.P., and Rai S.K. Polym Eng Sci 46 (2006) 946-953
16. Ingram M.D., Staesche H., and Ryder K.S. Solid State Ionics 169 (2004) 51-57
17. Bengoechea M., Boyano I., Miguel O., Cantero I., Ochoteco E., Pomposo J., and Grande H. J Power Source 160 (2006) 585-591
18. Choi Y.S., Joo S.H., Lee S.A., You D.J., Kim H., Pak C., et al. Macromolecules 39 (2006) 3275-3282
19. Hermelin E., Petitjean J., Lacroix J.C., Chane-Ching K.I., Tanguy J., and Lacaze P.C. Chem Mater 20 (2008) 4447-4456
20. Tüken T. Prog Org Coat 55 (2006) 60-65
21. Yavuz O., Ram M.K., Aldissi M., Poddar P., and Srikanth H. Synth Metal 151 (2005) 211-217
22. Ren X., Zhao Q., Liu J., Liang X., Zhang Q., Zhang P., et al. J Nanosci Nanotechnol 8 (2008) 2643-2646
23. Berdichevsky Y., and Lo Y.H. Adv Mater 18 (2006) 122-125
24. Ramanaviciene A., and Ramanavicius A. Biosensors Bioelectron 20 (2004) 1076-1082
25. Cao J., and Chung D.D.L. Cem Concr Res 34 (2004) 1889-1892
26. Memon A.H., Radin S.S., Zain M.F.M., and Trottier J.F. Cem Concr Res 32 (2002) 373-377
27. Duan Y.P., Liu S.H., and Guan H.T. Sci Technol Adv Mater 6 (2005) 513-518
28. Ramsden A.R., and Shibaoka M. Atmos Environ 16 (1982) 2191-2206
29. Kukier U., Ishak C.F., Sumner M.E., and Miller W.P. Environ Pollut 123 (2003) 255-266
30. Jang J., and Yoon H. Adv Mater 16 (2004) 799-802
31. Sahoo N.G., Jung Y.C., So H.H., and Cho J.W. Synth Met 157 (2007) 374-379
32. Ustamehmetoglu B., and Akar A. J Appl Polym Sci 82 (2001) 1098-1106
33. Kizilcan N., Öz N.K., Ustamehmetoglu B., and Akar A. Eur Polym J 42 (2006) 2361-2368
34. Perruchot C., Chehimi M.M., Delamar M., Eccles J.A., Steele T.A., and Mair C.D. Synth Met 113 (2000) 53-63
35. Qiu G., Wang Q., and Nie M. Macromol Mater Eng 291 (2006) 68-71
36. Carrasco P.M., Grande H.J., Cortazar M., and Alberdi J.M. Synth Met 156 (2006) 420-425
37. Intelmann C.M., Syritski V., Tsankov D., Hinrichs K., and Rappich J. Electrochim Acta 53 (2008) 4046-4050
38. Mravčaková M., Omastová M., Olejníková K., Pukánszky B., and Chehimi M.M. Synth Met 157 (2007) 347-357
39. Aydoǧan S., Saǧlam M., and Türüt A. Polymer 46 (2005) 10982-10988
40. Ray S.S., and Okamoto M. Prog Polym Sci 15 (2003) 1539-1641
41. Liu Y., and Tsai C. Chem Mater 15 (2003) 320-326
42. Kim J.W., Liu F., Choi H.J., Hong S.H., and Joo J. Polymer 44 (2003) 289-293
43. Muruggendrappa M.V., Khasim S., and Prasad M.V.N.A. Bull Mater Sci 28 (2005) 565-569
44. Ng T.N., Silveira W.R., and Marohn J.A. Phys Rev Lett 98 (2007) 066101
45. Lee G.J., Lee S.H., Ahn K.S., and Kim K.H. J Appl Polym Sci 84 (2002) 2583-2590
46. Emin D. Phys Rev Lett 32 (1974) 303-307