Interlaminar shear strain measurement on angle-ply laminate free edge using digital image correlation

Composites Part A: Applied Science and Manufacturing

Volumn 40, Issue 12, 2009, Pages 1911-1920

  Lecomte Grosbras, Pauline ^a,b   Paluch, Bernard ^a   Brieu, Mathias ^b   Saxcé, Géry De ^c   Sabatier, Laurent ^d  

^a ONERA   (France)

^b ECOLE CENTRALE DE LILLE   (France)

^c UNIV LILLE   (France)

^d CNRS   (France)

Author keywords

A. Carbon fibre; A. Laminates; B. Microstructure; Digital image correlation

Indexed keywords

CARBON FIBERS; IMAGE ANALYSIS; LAMINATES; MICROSTRUCTURE; SHEAR STRAIN; UNCERTAINTY ANALYSIS;

ANGLE PLY LAMINATE; CARBON/EPOXY LAMINATES; CORRELATION PARAMETERS; D. DIGITAL IMAGE CORRELATION (DIC); DIGITAL IMAGE CORRELATIONS; INTERLAMINAR STRAINS; MEASUREMENT UNCERTAINTY; NONLINEAR BEHAVIOURS;

STRAIN MEASUREMENT;

EID: 72049092023     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2009.07.011     Document Type: Article

References (31)

1. Dong S., Pister K., and Taylor R. On the theory of laminated anisotropic shell and plates. J Aeronaut Sci 29 (1962) 969-975
2. Pagano N.J., and Pipes R.B. The influence of stacking sequence on laminate strength. J Compos Mater 5 (1971) 50-57
3. Pipes R.B., and Pagano N.J. Interlaminar stresses in composite laminates under uniform axial extension. J Compos Mater 4 (1970) 538-548
4. Pagano N.J. Free edge stress fields in composite laminates. Int J Solids Struct 14 (1978) 401-406
5. Wang A.S.D., and Crossman F.W. Some new results on edge effects in symmetric composite laminates. J Compos Mater 11 (1978) 92-106
6. Herakovich C.T. On the relationship between engineering properties and delamination. J Compos Mater 15 (1981) 339-348
7. Engrand D. A boundary layer approach to the calculation of transverse stresses along free edges of a symmetric laminated plate of arbitrary width under in plane loading. Compos Struct (1981) 247-261
8. Wang S., and Choi I. Boundary layer effect in composite laminates. Part I: free-edge stress singularities. Part II: free-edge stress solutions and characteristics. J Appl Mech 49 (1982) 541-550
9. Brewer J.C., and Lagace P.A. Quadratic stress criterion for initiation of delamination. J Compos Mater 22 (1988) 1141-1155
10. Herakovich C.T. Edge effects and delamination failures. J Strain Anal 24 (1989) 245-252
11. Allix O., Leveque D., and Perret L. Identification and forecast of delamination in composite laminates by interlaminar interface model. Compos Sci Technol 56 (1998) 671-678
12. Reddy J.N. Mechanics of laminated composite plates and shell theory and analysis (2003), CRC Press, New York
13. Mittelstedt C., and Becker W. Asymptotic analysis of stress singularities in composite laminates by the boundary finite element method. Compos Struct 71 (2005) 210-219
14. Zen W., and Wandji C. A study of global-local high-order theories for laminated composite plates. Compos Struct 79 (2007) 44-54
15. Nosier A., and Bahrami A. Interlaminar stresses in antisymmetric angle-ply laminates. Compos Struct 78 (2007) 18-33
16. Mittelstedt C., and Becker W. The pipes-pagano problem revisited: elastic fields in boundary layers of plan laminated specimens under combined thermomechanical load. Compos Struct 80 (2007) 373-395
17. Kim R.Y., and Soni S.R. Experimental and analytical studies on the onset of delamination in laminated composite. J Compos Mater 18 (1984) 70-80
18. Schellenkens J.C., and De Borst R. Free edge delamination in carbon-epoxy laminates: a novel numerical/experimental approach. Compos Struct 28 (1994) 357-373
19. Loriot T., Marion G., Harry R., and Wargnier H. Onset of free edge delamination in composite laminates under tensile loading. Composites Part B 34 (2003) 459-471
20. Diaz A., and Caron J.F. Interface plasticity and delamination onset prediction. Mech Mater 38 (2006) 648-663
21. Grediac M. The use of full field measurements methods in composite material characterization: interest and limitations. Composites Part A. 35 (2004) 751-761
22. Pipes R.B., and Daniel I.M. Moiré analysis of the interlaminar shear edge effect in laminated composites. J Compos Mater 5 (1971) 255-259
23. Czarnek R., Post D., and Herakovich C.T. Edge effects in composites by Moiré interferometry. Exp Techniques 7 (1983) 18-21
24. Heravovich C.T., Post D., Buckzek M.B., and Czarnek R. Free edge strain concentrations in real composite laminates: experimental-theoretical correlation. J Appl Mech 52 (1983) 787-793
25. Mollenhauer D., and Reifsnider K. Measurements of interlaminar deformation along a cylindrical surface of a hole in laminated composite material by Moiré Interferometry. Compos Sci Technol 60 (2000) 2375-2388
26. El Bartali A., Aubin V., and Degallaix S. Fatigue damage analysis in a duplex stainless steel by digital image correlation technique. Fatigue Fract Eng Mater Struct 31 (2008) 137-151
27. Haddadi H., and Belhabib S. Use of rigid body motion for the investigation and estimation of the measurement errors related to digital image correlation technique. Optics Lasers Eng 46 (2008) 185-196
28. Bornert M., Bremand F., Doumalin P., Dupre J.-.C., Fazzini M., Grediac M., et al. Assessment of digital image correlation measurement errors: methodology and results. Exp Mech 49 (2009) 353-370
29. Pierron F., Green B., and Wisnom M.R. Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part I: methodology. Composites Part A 38 (2007) 2307-2320
30. Triconnet K., Derrien K., Hild F., and Baptiste D. Parameter choice for optimized digital image correlation. Optics Lasers Eng 47 (2009) 728-737
31. STAM Standard. E2208 - 02. Standard guide for evaluating non-contacting optical strain measurement systems (2003), ASTM International, West Conshohocken, PA