Effect of latex on surface structure and wetting of pigment coatings

Colloids and Surfaces A: Physicochemical and Engineering Aspects

Volumn 353, Issue 2-3, 2010, Pages 104-116

  Jarnstrom J ^a   Vaisanen M ^b   Lehto, R ^b   Jasberg A ^b   Timonen, J ^b   Peltonen, J ^a  

^a ÅBO AKADEMI UNIVERSITY   (Finland)

^b UNIVERSITY OF JYVÄSKYLÄ   (Finland)

Author keywords

Absorption; Contact angle; Latex; Pigment coating; Surface roughness; Wetting

Indexed keywords

ABSORPTION; ATOMIC FORCE MICROSCOPY; BINDERS; BUTADIENE; CHEMICAL PROPERTIES; COATINGS; CONTACT ANGLE; HARDENING; KAOLIN; LATEXES; LIQUIDS; NANOFILTRATION MEMBRANES; OPTICAL MICROSCOPY; SECONDARY ION MASS SPECTROMETRY; STYRENE; SURFACE CHEMISTRY; SURFACE ROUGHNESS; SURFACE STRUCTURE; SURFACE TENSION; SURFACE TREATMENT; TOMOGRAPHY; WETTING;

AFM; AFM PHASE IMAGING; AREA FRACTION; BASE PAPER; COATING LAYER; CRITICAL SURFACES; EFFECTIVE SURFACE AREA; FUNCTIONAL PROPERTIES; INK SETTING RATES; INTERFACIAL PROPERTY; KAOLIN PIGMENTS; LATEX BINDERS; LENGTH SCALE; LIQUID ABSORPTION; PHASE-CONTRAST IMAGE; PIGMENT COATING; SPREADING PROPERTY; STYRENE BUTADIENES; SURFACE ENERGIES; TOF SIMS; TOPOGRAPHIC DATA; WETTING BEHAVIOR; WORK OF ADHESION; X-RAY TOMOGRAPHY;

SURFACE PROPERTIES;

KAOLIN; LATEX;

ABSORPTION; ARTICLE; ATOMIC FORCE MICROSCOPY; BULK DENSITY; CHEMICAL STRUCTURE; CONFOCAL MICROSCOPY; CONTACT ANGLE; CONTROLLED STUDY; IMAGE ANALYSIS; INTERMETHOD COMPARISON; MATERIAL COATING; NANOANALYSIS; NANOCHEMISTRY; PRIORITY JOURNAL; PROCESS OPTIMIZATION; SURFACE PROPERTY; TIME OF FLIGHT MASS SPECTROMETRY; TOMOGRAPHY; TOPOGRAPHY;

EID: 71649103635     PISSN: 09277757     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.colsurfa.2009.11.001     Document Type: Article

References (60)

1. Järn M., Brieler F.J., Kuemmel M., Grosso D., and Linden M. Wetting of heterogeneous nanopatterned inorganic surfaces. Chem. Mater. 20 4 (2008) 1476-1483
2. Ralston J., Popescu M., and Sedev R. Dynamics of wetting from an experimental point of view. Ann. Rev. Mater. Res. 38 (2008) 23-43
3. Modaressi H., and Garnier G. Mechanism of wetting and absorption of water droplets on sized paper: effects of chemical and physical heterogeneity. Langmuir 18 3 (2002) 642-649
4. Al-Turaif H., Unertl W.N., and Lepoutre P. Effect of pigmentation on the surface chemistry and surface free energy of paper coating binders. J. Adhesion Sci. Technol. 9 7 (1995) 801-811
5. Järnström J., Granqvist B., Järn M., Tåg C.-M., and Rosenholm J.B. Alternative methods to evaluate the surface energy components of ink-jet paper. Colloids Surf. A: Physicochem. Eng. Aspects 294 (2007) 46
6. Tåg C.-M., Järn M., Granqvist B., Järnström J., Peltonen J., and Rosenholm J.B. The influence of surface structure on the wetting of coated offset papers. Holzforschung 61 (2007) 516-522
7. Lehtinen E., and Pigment Coating. Surface Sizing of Paper, Fapet Oy (2000), Gummerus Printing, Jyväskylä
8. Kenttä E., Pöhler T., and Juvonen K. Latex uniformity in the coating layer of paper. Nord. Pulp Paper Res. J. 21 5 (2006) 665-669
9. Larsson M., Engström G., Vidal D., and Zou X. Impact of calendering on coating structures. Nord. Pulp Paper Res. J. 22 2 (2007) 267-274
10. Järnström J., Ihalainen P., Backfolk K., and Peltonen J. Roughness of pigment coatings and its influence on gloss. Appl. Surf. Sci. 254 (2008) 5741-5749
11. Järnström J., Peltonen J., Sinervo L., and Toivakka M. Topography and gloss of precipitated calcium carbonate coating layers on a model substrate. Tappi J. 6 5 (2007) 23-31
12. Elton N.J., and Preston J.S. Polarized light reflectometry for studies of paper coating structure, Part I, method and instrumentation. Tappi J. 5 7 (2006) 8-16
13. Elton N.J., and Preston J.S. Polarized light reflectometry for studies of paper coating structure, Part II, application to coating structure, gloss and porosity. Tappi J. 5 8 (2006) 10-16
14. A.G. Hiorns, J.C. Husband, D.J. Parsons, D.F. Kent, Coating surface composition using ATR-IR spectroscopy, TAPPI, Adv. Coat. Fund. Sym., February 8-10 2006, Turku, Finland, pp. 67-80.
15. Kenttä E., Juvonen K., Halttunen M., and Vyörykkä J. Spectroscopic methods for determination of latex content of coating layers. Nord. Pulp Paper Res. J. 15 5 (2000) 579-585
16. Vyörykkä J., Juvonen K., Bousfield D., and Vuorinen T. Raman microscopy in lateral mapping of chemical and physical composition of paper coating. Tappi J. 3 9 (2004) 19-24
17. Vyörykkä J., Vuorinen T., Bousfield D., and Douglas W. Confocal Raman microscopy: a nondestructive method to analyze depth profiles of coated and printed papers. Nord. Pulp Paper Res. J. 19 2 (2004) 218-223
18. G. Chinga, AT Structural studies of LWC paper coating layers using SEM and image analysis techniques, Doctoral Thesis, Norwegian University of Science and Technology, Department of Chemical Engineering, 2002.
19. Kugge C. An AFM study of local film formation of latex in paper coatings. J. Pulp Paper Sci. 30 4 (2004) 105-111
20. Sodhi R.N.S., Sun L., Sain M., and Farnood R. Analysis of ink/coating penetration on paper surfaces by time-of-flight secondary ion mass spectrometry (ToF-SIMS) in conjunction with principal component analysis (PCA). J. Adhesion 84 3 (2008) 277-292
21. Wenzel R.W. Resistance of solid surfaces to wetting by water. Ind. Eng. Chem. 28 (1936) 988-994
22. Cassie A.B.D. Contact angles. Discuss. Trans. Faraday Soc. 3 (1948) 11-16
23. Fowkes F.M. Attractive forces at interfaces. Ind. Eng. Chem. 56 (1964) 40-52
24. Adamson A.W. Physical Chemistry of Surfaces. 6th ed. (1997), Wiley-Interscience Publication, New York
25. Marmur A. Solid-surface characterization by wetting. Ann. Rev. Mater. Res. 39 (2009) 473-489
26. Marmur A. Soft contact: measurement and interpretation of contact angles. SoftMatter 2 (2006) 12-17
27. van Oss C.J., Chadhury M.J., and Good R.J. Monopolar surfaces. Adv. Colloid Interface Sci. 28 1 (1987) 35-64
28. van Oss C.J., Chadhury M.J., and Good R.J. Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems. Chem. Rev. 88 6 (1988) 927-941
29. Della Volpe C., and Siboni S. Some reflections on acid-base solid surface free energy theories. J. Colloid Interface Sci. 195 1 (1997) 121-136
30. Kwok D.Y., Li D., and Neumann A.W. Evaluation of the Lifshitz-van der Waals/acid-base approach to determine interfacial tensions. Langmuir 10 4 (1994) 1323-1328
31. Kwok D.Y., Lee Y., and Neumann A.W. Evaluation of the Lifshitz-van Der Waals/acid-base approach to determine interfacial tensions. 2. Interfacial tensions of liquid-liquid systems. Langmuir 14 9 (1998) 2548-2553
32. Kwok D.Y. The usefulness of the Lifshitz-van der Waals/acid-base approach for surface tension components and interfacial tensions. Colloids Surf. A: Physicochem. Eng. Aspects 156 1-3 (1999) 191-200
33. Greiveldinger M., and Shanahan M.E.R. A critique of the mathematical coherence of acid/base interfacial free energy theory. J. Colloid Interface Sci. 215 1 (1999) 170-178
34. Della Volpe C., Maniglio D., Siboni S., and Morra M. Recent theoretical and experimental advancements in the application of van Oss-Chaudury-Good acid-base theory to the analysis of polymer surfaces I. General aspects. J. Adhesion Sci. Technol. 17 11 (2003) 1477-1505
35. Kipphan H. Handbook of Print Media (2001), Springer-Verlag, Berlin Heidelberg, New York
36. Gane P.A.C., and Seyler E.N. Tack development: an analysis of ink/paper interaction in offset printing. Tappi Coating Conference, Proceedings (1994), TAPPI Press, Atlanta 243-260
37. Ridgway C.J., and Gane P.A.C. Bulk density measurement and coating porosity calculation for coated paper samples. Nord. Pulp Paper Res. J. 18 1 (2003) 24-31
38. Garcia R., Gomez C.J., Martinez N.F., Patil S., Dietz C., and Magerle R. Identification of nanoscale dissipation processes by dynamic atomic force microscopy. Phys. Rev. Lett. 97 1 (2006) 016103/1-016103/4
39. Juuti M., Prykäri T., Alarousu E., Koivula H., Myllys M., Lähteelä A., Toivakka M., Timonen J., Myllylä R., and Peiponen K.-E. Detection of local specular gloss and surface roughness from black prints. Colloids Surf. A: Physicochem. Eng. Aspects 299 (2007) 101-108
40. Chinga-Carrasco G., Kauko H., Myllys M., Timonen J., Wang B., Zhou M., and Fossum J.O. New advances in the 3D characterization of mineral coating layers on paper. J. Microsc. 232 2 (2008) 212-224
41. Image Metrology, The Scanning Probe Image Processor, SPIP™, User's and Reference Guide Version 4.4, Copenhagen, 2007.
42. Stout K.J. Development of Methods for the Characterisation of Roughness in Three Dimensions (2000), Penton Press, London
43. Peltonen J., Järn M., Areva S., Lindén M., and Rosenholm J.B. Topographical parameters for specifying a three dimensional surface. Langmuir 20 (2004) 9428-9431
44. J.T. Vyörykkä, A. Fogden, J. Daicic, M. Ernstsson, A-S. Jääskeläinen, TAPPI, Adv. Coat. Fund. Sym., February 8-10, 2006, Turku, Finland, pp. 41-66.
45. Fowkes F.M. In: Mittal K.L. (Ed). Physicochemical Aspects Of Polymer Surfaces vol. 2 (1983), Plenum, New York 586-603
46. Fowkes F.M. Determination of interfacial tensions, contact angles, and dispersion forces in surfaces by assuming additivity of intermolecular interactions in surfaces (communication). J. Phys. Chem. 66 (1962) 382
47. Owens D.K., and Wendt R.C. Estimation of the surface free energy of polymers. J. Appl. Polym. Sci. 13 8 (1969) 1741-1747
48. Kaelble D.H. Dispersion-polar surface tension properties of organic solid. J. Adhesion 2 4 (1970) 66-81
49. Wu S. Polar and nonpolar interactions in adhesion. J. Adhesion 5 1 (1973) 39-55
50. Wu S., and Brzozowski K.J. Surface free energy and polarity of organic pigments. J. Colloid Interface Sci. 37 4 (1971) 686-690
51. Good R.J., and van Oss C.J. The modern theory of contact angles and the hydrogen bond components of surface energies. In: Schrader M.E., and Loeb G.I. (Eds). Modern Approaches to Wettability: Theory and Application (1992), Plenum Press, New York 1-27
52. Poon C.Y., and Bhushan B. Comparison of surface roughness measurements by stylus profiler, AFM and non-contact optical profiler. Wear 190 1 (1995) 76-88
53. Whitehouse D.J. Handbook of Surface and Nanometrology (2003), Institute of Physics Publishing, Co., Bristol
54. Järnström J., Ihalainen P., Lemström A., Toivakka M., and Peltonen J. The influence of different roughness scales of pigment coated papers on print gloss. Nord. Pulp Paper Res. J. 24 3 (2009) 327-334
55. Eklund D.E. Influence of blade geometry and blade pressure on the appearance of a coated surface. Tappi J. 67 5 (1984) 66-70
56. ToF-SIMS: surface analysis by mass spectrometry, J.C. Vickerman, David Briggs (Eds.), IM Publications, Chichester, 2001.
57. Ho C.C., and Khew M.C. Surface free energy analysis of natural and modified natural rubber latex films by contact angle method. Langmuir 16 3 (2000) 1407-1414
58. Al-Turaif H., and Lepoutre P. Evolution of surface structure and chemistry of pigmented coatings during drying. Prog. Org. Coat. 38 1 (2000) 43-52
59. Al-Turaif H. Relationship between surface chemistry and surface energy of different shape pigment blend coatings. J. Coat Technol. Res. 5 1 (2008) 85-91
60. Wu S. Polymer Interface and Adhesion (1982), Marcel Dekker, New York