Development of nanotechnology-based organic coatings

Composite Interfaces

Volumn 16, Issue 4, 2009, Pages 281-292

  Zhou, Shuxue ^a   Wu, Limin ^a  

^a FUDAN UNIVERSITY   (China)

Author keywords

Anti corrosion; Anti scratch; Coatings; Nanocomposite; Nanotechnology; UV blocking

Indexed keywords

ANTI-CORROSION; ANTI-CORROSION COATING; ANTI-SCRATCH; BARRIER COATINGS; NANO-COMPOSITE COATING; POTENTIAL APPLICATIONS; SUPERHYDROPHOBIC;

CORROSION PROTECTION; CORROSION RESISTANCE; NANOCOMPOSITES; NANOTECHNOLOGY;

ORGANIC COATINGS;

EID: 71649101384     PISSN: 09276440     EISSN: 15685543     Source Type: Journal    
DOI: 10.1163/156855409X447101     Document Type: Conference Paper

References (51)

1. Y. Q. Li, S. Y. Fu and Y. W. Mai, Preparation and characterization of transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency, Polymer 47, 2127-2132 (2006).
2. M. N. Xiong, G. X. Gu, B. You and L. M. Wu, Preparation and characterization of poly(styrene butylacrylate) latex/nano-ZnO nanocomposites, J. Appl. Polym. Sci. 90, 1923-1931 (2003).
3. H. Y. Li, Y. F. Chen, C. X. Ruan, W. M. Gao and Y. S. Xie, Preparation of organic-inorganic multifunctional nanocomposite coating via sol-gel routes, J. Nanoparticle Res. 3, 157-160 (2001).
4. T. Xu and C. S. Xie, Tetrapod-like nano-particle ZnO/acrylic resin composite and its multifunction property, Prog. Org. Coat. 46, 297-301 (2003).
5. N. S. Allen, M. Edge, A. Ortega, C. M. Liauw, J. Stratton and R. B. McIntyre, Behaviour of nanoparticle (ultrafine) titanium dioxide pigments and stabilisers on the photooxidative stability of water based acrylic and isocyanate based acrylic coatings, Polym. Degrad. Stabil. 78, 467-478 (2002).
6. N. S. Allen, M. Edge, A. Ortega, G. Sandoval, C. M. Liauw, J. Verran, J. Stratton and R. B. McIntyre, Degradation and stabilisation of polymers and coatings: nano versus pigmentary titania particles, Polym. Degrad. Stabil. 85, 927-946 (2004).
7. Q. Y. He, L. M. Wu, G. X. Gu and Y. Bo, Preparation and characterization of acrylic/nano-TiO2 composite latex, High Perf. Polym. 14, 383-396 (2002).
8. S. X. Zhou, L. M. Wu, M. N. Xiong, Q. Y. He and G. D. Chen, Dispersion and UV-VIS property of nanoparticles in coatings, J. Dispers. Sci. Technol. 25, 417-433 (2004).
9. V. Nguyen, F. X. Perrin and J. L. Vernet, Protective organic-inorganic hybrid coatings on mild steel derived from Ti(OC4H9)4-modified precursors, Mater. Corros. - Werkstoffe Und Korrosion 55, 659-664 (2004).
10. F. X. Perrin, V. Nguyen and J. L. Vernet, Mechanical properties of polyacrylic-titania hybridsmicrohardness studies, Polymer 43, 6159-6167 (2002).
11. T. Y. Kim, K. Alhooshani, A. Kabir, D. P. Fries and A. Malik, High pH-resistant, surface-bonded sol-gel titania hybrid organic-inorganic coating for effective on-line hyphenation of capillary microextraction (in-tube solid-phase microextraction) with high-performance liquid chromatography, J. Chromatography 1047, 165-174 (2004).
12. J. M. Yeh, C. J. Weng, K. Y. Huang, H. Y. Huang, Y. H. Yu and C. H. Yin, Thermal and optical properties of PMMA-titania hybrid materials prepared by sol-gel approach with HEMA as coupling agent, J. Appl. Polym. Sci. 94, 400-405 (2004).
13. M. N. Xiong, S. X. Zhou, L. M. Wu, B. Wang and L. Yang, Sol-gel derived organic-inorganic hybrid from trialkoxysilane-capped acrylic resin and titania: effects of preparation conditions on the structure and properties, Polymer 45, 8127-8138 (2004).
14. M. N. Xiong, B. You, S. X. Zhou and L. M. Wu, Study on acrylic resin/titania organic-inorganic hybrid materials prepared by the sol-gel process, Polymer 45, 2967-2976 (2004).
15. W. C. Chen, S. J. Lee, L. H. Lee and J. L. Lin, Synthesis and characterization of trialkoxysilanecapped poly(methyl methacrylate)-titania hybrid optical thin films, J. Mater. Chem. 9, 2999-3003 (1999).
16. A. H. Yuwono, J. M. Xue, J. Wang, H. I. Elim, W. Ji, Y. Li and T. J. White, Transparent nanohybrids of nanocrystalline TiO2 in PMMA with unique nonlinear optical behavior, J. Mater. Chem. 13, 1475-1479 (2003).
17. M. I. Sarwar and Z. Ahmad, Interphase bonding in organic-inorganic hybrid materials using aminophenyltrimethoxysilane, Eur. Polym. J. 36, 89-94 (2000).
18. Y. Akamatsu, K. Makita, H. Inaba and T. Minami, Effect of the addition of TiO2 to SiO2 films with concave-convex surface derived by the sol-gel method on film hardness and application to water-repellent glasses for automotive windows, J. Ceram. Soc. Japan 108, 365-369 (2000).
19. M. Sangermano, E. Borlatto, F. D. D'Hérin Bytner, A. Priola and G. Rizza, Photostabilization of cationic UV-cured coatings in the presence of nano-TiO2, Prog. Org. Coat. 59, 122-125 (2007).
20. S. X. Zhou, L. M. Wu, J. Sun and W. D. Shen, The changes of the properties of acrylic based polyurethane via addition of nano-silica, Prog. Org. Coat. 45, 33-42 (2002).
21. S. X. Zhou, L. M. Wu, J. Sun and W. D. Shen, Effect of nanosilica on the properties of polyesterbased polyurethane, J. Appl. Polym. Sci. 88, 189-193 (2003).
22. M. Q. Zhang, M. Z. Rong, S. L. Yu, B. Wetzel and K. Friedrich, Improvement of tribological performance of epoxy by the addition of irradiation grafted nano-inorganic particles, Macromol. Mater. Engng 287, 111-115 (2002).
23. E. Petrovicova, R. Knight, L. S. Schadler and T. E. Twardowski, Nylon 11/silica nanocomposite coatings applied by the HVOF process. II. Mechanical and barrier properties, J. Appl. Polym. Sci. 78, 2272-2289 (2000). (Pubitemid 32027538)
24. H. J. Glasel, F. Bauer, H. Ernst,M. Findeisen, E. Hartmann, H. Langguth, R. Mehnert and R. Schubert, Preparation of scratch and abrasion resistant polymeric nanocomposites by monomer grafting onto nanoparticles, 2-characterization of radiation-cured polymeric nanocomposites, Macromol. Chem. Phys. 201, 2765-2770 (2000).
25. S. X. Zhou, L. M.Wu, W. D. Shen and G. X. Gu, Study on the morphology and tribological properties of acrylic based polyurethane/fumed silica composite coatings, J. Mater. Sci. 39, 1593-1600 (2004).
26. M. M. Jalili, S. Moradian, H. Dastmalchian and A. Karbasi, Investigating the variations in properties of 2-pack polyurethane clear coat through separate incorporation of hydrophilic and hydrophobic nano-silica, Prog. Org. Coat. 59, 81-87 (2007).
27. X. C. Chen, L. M. Wu, S. X. Zhou and B. You, In situ polymerization and characterization of polyester-based polyurethane/nano-silica composites, Polym. Intl 52, 993-998 (2003).
28. V. A. Soloukhin, W. Posthumus, J. C. M. Brokken-Zijp, J. Loos and G. With, Mechanical properties of silica-(meth)acrylate hybrid coatings on polycarbonate substrate, Polymer 43, 6169-6181 (2002).
29. G. D. Chen, S. X. Zhou and L. M. Wu, Influence of the surface property of nanosilica particles on its redispersibility and properties of acrylic based polyurethane/silica composites, J. Colloid Interf. Sci. 281, 339-350 (2005).
30. Y. C. Chen, S. X. Zhou, H. H. Yang and L. M. Wu, Structure and mechanical property of polyurethane/silica hybrid coatings, J. Appl. Polym. Sci. 95, 1032-1039 (2005).
31. B. Ahmadi, M. Kassiriha, K. Khodabakhshi and E. R. Mafi, Effect of nano layered silicates on automotive polyurethane refinish clear coat, Prog. Org. Coat. 60, 99-104 (2007).
32. F. Bauer, R. Flyunt, K. Czihal, M. R. Buchmeiser, H. Langguth and R. Mehnert, Nano/micro particle hybrid composites for scratch and abrasion resistant polyacrylate coatings, Macromol. Mater. Engng 291, 493-498 (2006).
33. F. Bauer, R. Flyunt, K. Czihal, H. Langguth, R. Mehnert, R. Schubert and M. R. Buchmeiser, UV curing and matting of acrylate coatings reinforced by nano-silica and micro-corundum particles, Prog. Org. Coat. 60, 121-126 (2007).
34. F. Bauer, H. J. Glasel, U. Decker, H. Ernst, A. Freyer, E. Hartmann, V. Sauerland and R. Mehnert, Trialkoxysilane grafting onto nanoparticles for the preparation of clear coat polyacrylate systems with excellent scratch performance, Prog. Org. Coat. 47, 147-153 (2003).
35. J. M. Yeh, S. J. Liou, C. Y. Lai and P. C. Wu, Enhancement of corrosion protection effect in polyaniline via the formation of polyaniline-clay nanocomposite materials, Chem. Mater. 13, 1131-1136 (2001).
36. J. M. Yeh, C. L. Chen, Y. C. Chen, C. Y. Ma, K. R. Lee, Y. Wei and S. X. Li, Enhancement of corrosion protection effect of poly(o-ethoxyaniline) via the formation of poly(o-ethoxyaniline)-clay nanocomposite materials, Polymer 43, 2729-2736 (2002).
37. J. M. Yeh, S. J. Liou, C. Y. Lin, C. Y. Cheng and Y.W. Chang, Anticorrosively enhanced PMMAclay nanocomposite materials with quaternary alkylphosphonium salt as an intercalating agent, Chem. Mater. 14, 154-161 (2002).
38. J. M. Yeh, S. J. Liou, H. J. Lu and H. Y. Huang, Enhancement of corrosion protection effect of poly(styrene-co-acrylonitrile) by the incorporation of nanolayers of montmorillonite clay into copolymer matrix, J. Appl. Polym. Sci. 92, 2269-2277 (2004).
39. J. M. Yeh, C. L. Chen, Y. C. Chen, C. Y. Ma, H. Y. Huang and Y. H. Yu, Enhanced corrosion prevention effect of polysulfone-clay nanocomposite materials prepared by solution dispersion, J. Appl. Polym. Sci. 92, 631-637 (2004).
40. Y. H. Yu, J. M. Yeh, S. J. Liou and Y. P. Chang, Organo-soluble polyimide (TBAPP-OPDA)/clay nanocomposite materials with advanced anticorrosive properties prepared from solution dispersion technique, Acta Mater. 52, 475-486 (2004).
41. M. R. Bagherzadeh and F. Mahdavi, Preparation of epoxy-clay nanocomposite and investigation on its anti-corrosive behavior in epoxy coating, Prog. Org. Coat. 60, 117-120 (2007).
42. S. V. Lamaka, M. L. Zheludkevich, K. A. Yasakau, R. Serra, S. K. Poznyak and M. G. S. Ferreira, Nanoporous titania interlayer as reservoir of corrosion inhibitors for coatings with self-healing ability, Prog. Org. Coat. 58, 127-135 (2007).
43. L. L. Yan, K. Wang and L. Ye, Super hydrophobic property of PVDF/CaCO3 nanocomposite coatings, J. Mater. Sci. Lett. 22, 1713-1717 (2003).
44. Y. Y. Liu, X. Q. Chen and J. H. Xin, Super-hydrophobic surfaces from a simple coating method: a bionic nanoengineering approach, Nanotechnology 17, 3259-3263 (2006).
45. H. Wang, L. M. Tang, X. M. Wu, W. T. Dai and Y. Y. Qiu, Fabrication and anti-frosting performance of super hydrophobic coating based on modified nano-sized calcium carbonate and ordinary polyacrylate, Appl. Surf. Sci. 253, 8818-8824 (2007).
46. J. Lange and Y. Wyser, Recent innovations in barrier technologies for plastic packaging - a review, Pack. Technol. Sci. 16, 149-158 (2003).
47. B. Singh, J. Bouchet, G. Rochat, Y. Leterrier, J.-A. E. Månson and P. Fayet, Ultra-thin hybrid organic/inorganic gas barrier coatings on polymers, Surf. Coat. Technol. 201, 7107-7114 (2007).
48. A. A. Gusev and H. R. Lusti, Rational design of nanocomposites for barrier applications, Adv. Mater. 13, 1641 (2001).
49. G. H. Fredrickson and J. Bicerano, Barrier properties of oriented disk composites, J. Chem. Phys. 110, 2181-2188 (1999).
50. J. C. Matayabas, Jr. and S. R. Turner, Nanocomposite technology for enhancing the gas barrier of polyethylene terephthalate, in: Polymer-Clay Nanocomposites, T. J. Pinnavaia and G. W. Beall (Eds). Wiley, Chichester, UK (2000).
51. P. Schwarz and M. Mahlke, Polyamide nanocomposites for extrusion coating applications, in: Proc. TAPPI 9th Eur. PLACE Conf., Rome, Italy (2003).