The effects of surface and pore characteristics of natural fiber on interfacial adhesion of henequen fiber/PP biocomposites

Composite Interfaces

Volumn 16, Issue 4, 2009, Pages 359-376

  Choi, Hae Young ^a   Han, Seong Ok ^a   Lee, Jung Soon ^b  

^a Korea Institute of Energy Research (KIER)   (South Korea)

^b Chungnam National University   (South Korea)

Author keywords

Electron beam irradiation; Henequen fiber; Interfacial property; Interlaminar shear strength; Nonfreezing bound water; Pore distribution; Porosity

Indexed keywords

ELECTRON BEAM IRRADIATION; HENEQUEN FIBERS; INTERFACIAL PROPERTY; INTERLAMINAR SHEAR STRENGTH; NON-FREEZING BOUND WATER; PORE DISTRIBUTION;

ADHESION; ATOMIC FORCE MICROSCOPY; COMPRESSION MOLDING; DIFFERENTIAL SCANNING CALORIMETRY; ELECTRON BEAMS; IMPURITIES; IRRADIATION; MERCURY (METAL); MORPHOLOGY; PLASTIC PRODUCTS; POLYSACCHARIDES; POROSITY; PUMPING PLANTS; REINFORCED PLASTICS; SHEAR STRENGTH; SURFACE MORPHOLOGY; SURFACES; TENSILE STRENGTH; THERMOPLASTICS;

FIBERS;

EID: 71649083324     PISSN: 09276440     EISSN: 15685543     Source Type: Journal    
DOI: 10.1163/156855409X450873     Document Type: Conference Paper

References (42)

1. D. Cho, H. S. Lee, S. O. Han and L. T. Drzal, Effects of e-beam treatment on the interfacial and mechanical properties of henequen/polypropylene composites, Adv. Comp. Mater. 16, 315-334 (2007).
2. I. Aranberri-Askargorta, T. Lampke and A. Bismarck, A wetting behavior of flax fibers as reinforcement for polypropylene, J. Colloid Interface Sci. 263, 590-596 (2003).
3. A. K. Mohanty, M. Misra and G. Hinrichsen, Biofibers, biodegradable polymers and biocomposites: an overview, Macromol. Mater. Engng 276/277, 1-24 (2000).
4. Y. Pang, D. Cho, S. O. Han and W. H. Park, Interfacial shear strength and thermal properties of electron beam-treated henequen fibers reinforced unsaturated polyester composites, Macromol. Res. 13, 453-459 (2005).
5. Y. H. Han, S. O. Han, D. H. Cho and H. I. Kim, Henequen/unsaturated polyester biocomposites: electron beam irradiation treatment and alkali treatment effects on the henequen fiber, Macromolecular Symposia 245/246, 539-548 (2006).
6. S. Mishra, A. K. Mohanty, L. T. Drzal, M. Misra and G. Hinrichsen, A review on pineapple leaf fibers, sisal fibers and their biocomposite, Macromol. Mater. Engng 289, 955-974 (2004).
7. V. Alvarez, I. Mondragon and A. Vazquez, Influence of chemical treatments on the interfacial adhesion between sisal fiber and different biodegradable polymer, Composite Interfaces 14, 605-616 (2007).
8. M. Jacob, B. Francis, K. T. Varughese and S. Thoma, The effects of silane coupling agents on the viscoelastic properties of rubber biocomposites, Macromol.Mater. Engng 291, 1119-1126 (2006).
9. B. Madsen and H. Liholt, Physical and mechanical properties of unidirectional plant fiber composites- an evaluation of the influence of porosity, Compos. Sci. Technol. 63, 1265-1272 (2003).
10. H.W. Park, K.W. La and I. K. Song, Effect of triethylaluminum/transition- metal ratio on the physical properties and chemical composition distributions of ethylene-hexene copolymers produced by a rac-Et(Ind)2ZrCl2/TiCl4/MAO/SMB catalyst, Macromol. Res. 15, 221-224 (2007).
11. S. Luo and A. N. Netravali, Characterization of henequen fibers and the henequen fiber/poly(hydroxybutyrate-co-hydroxyvalerate) interface, J. Adhesion Sci. Technol. 15, 423-437 (2001).
12. K. Koljonen, M. Osterberg, L.-S. Johansson and P. Stenius, Surface chemistry and morphology of different mechanical pulps determined by ESCA and AFM, Colloids and Surfaces A: Physicochem. Engng Aspects 228, 143-158 (2003).
13. J. Gustafsson, L. Ciovica and J. Peltonen, The ultrastructure of Spruce Kraft Pulps studied by atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), Polymer 44, 661-670 (2003).
14. M. A. Poggi, D. G. Mancosky, L. A. Bottomley and L. A. Lucia, Atomic force microscopic analysis of hydrogen peroxide bleached Kraft Northern Black Spruce fibers, J. Microscopy 220, 77-83 (2006).
15. I. Lee, B. R. Evans and J.Woodward, The mechanism of cellulase action on cotton fibers: evidence from atomic force microscopy, Ultramicroscopy 82, 213-221 (2000).
16. S. G. Lee, J. I. Yuck, C. W. Joo and T. J. Kang, Effect of the oxygen plasma treatments on the surface morphology of the ultra-high molecular weight polyethylene fiber, J. Korean Fib. Soc. 33, 376-385 (1996).
17. F. Collet, Porous structure and water vapour sorption of hemp-based materials, Constr. Build Mater., doi:10.1016/j.conbuildmat.2007.01.018.
18. G. Buschle-Diller, C. Fanter and F. Loth, Enzymatic hydrolysis of bead cellulose, Cellulose 2, 179-203 (1995).
19. S. G. Lee, D. C. Kim and T. J. Kim, The effect of oxygen plasma treatment on the physicochemical properties and interfacial strength of UHMWPE fibers, J. Korean Fib. Soc. 34, 459-465 (1997).
20. A. Bismarck, I. Aranberri-Askargorta and J. Springer, Surface characterization of flax, hemp and cellulose fibers: surface properties and the water uptake behavior, Green Chem. 3, 100-107 (2001).
21. G. Buschle-Diller, C. Fanter and F. Loth, Effect of cellulase on the pore structure of bead cellulose, Cellulose 2, 179-203 (1995).
22. S. M. Lee, H. J. Jeon and S. W. Choi, Structure and property modification of bimodal molecular weight distribution polyethylene by electron beam irradiation, Macromol. Res. 14, 640-645 (2006).
23. T. P. Nevell and S. H. Zeronian, Cellulose chemistry fundamentals, in: Cellulose Chemistry and Its Applications, T. P. Nevell and S. H. Zeronian (Eds). Ellis Horwood Limited, Wiley, New York (1985).
24. H. S. Kim, S. Kim and H. J. Kim, Enhanced interfacial adhesion of bioflour filled poly(propylene) biocomposites by electron-beam irradiation, Macromol. Mater. Engng 291, 762-772 (2006).
25. E. Takacs, L. Wojnarovits, J. Borsa, C. Foldvary, P. Hargittai and O. Zold, Effect of ́ -irradiation on cotton-cellulose, Rad. Phys. Chem. 55, 663-666 (1999).
26. S. D. Oh, B. S. Byun, S. H. Lee and S. H. Choi, Preparation of Ag-PS and Ag-PSS particles by ́ -irradiation and their antimicrobial efficiency against Staphylococcus aureus ATCC 6538 and Klebsiella pneumoniae ATCC 4352, Macromol. Res. 14, 194-198 (2006).
27. S. Jing, W. Peng and Z. Yingmin, Rapid melt polycondensation of L-lactic acid under microwave irradiation, Macromol. Res. 14, 659-662 (2006).
28. S. O. Han and Y. M. Jung, Characterization of henequen natural fiber by using two-dimensional correlation spectroscopy, J. Mol. Struct. 883-884, 142-148 (2008).
29. Y. H. Han, S. O. Han, D. Cho. Kim and H. I. Kim, Kenaf/polypropylene biocomposites: effects of electron beam irradiation and alkali treatment on kenaf natural fibers, Composite Interfaces 14, 559-578 (2007).
30. A. Pietak, S. Korte, E. Tan, A. Downard and M. P. Staiger, Atomic force microscopy characterization of the surface wettability of natural fiber, Appl. Surf. Sci. 253, 3627-3635 (2007).
31. A. Pietak, S. Korte, E. S. Q. Tan, A. J. Downard and M. P. Staiger, A novel technique for characterizing the surface of natural fibers, Appl. Surf. Sci. 253, 3627-3636 (2007).
32. J. Fahlen and L. Salmen, Cross-sectional structure of the secondary wall of wood fibers as affected by processing, J. Mater. Sci. 38, 119-126 (2003).
33. S. Westermarck, A. M. Juppo, K. Koiranen and J. Yliruusi, Mercury porosimetry of pharmaceutical powders and granules, J. Porous Mater. 5, 77-86 (1998).
34. K. Nakamura, T. Hatakeyama and H. Hatakeyama, Studies on bound water of cellulose by differential scanning calorimetry, Text. Res. J. 51, 607-613 (1981).
35. W. G. Liu and K. D. Yao, What causes the unfrozen water in polymers: hydrogen bonds between water and polymer change, Polymer 42, 3943-3947 (2001).
36. P. Petri, K. P. Tynjälä and P. Ström, Phase transformations of wood cell wall water, J. Wood Sci. 51, 118-123 (2005).
37. P. Luukkonen, T. Maloney, J. Rantanen, H. Paulapuro and J. Yliruusi, Microcrystalline cellulose- water interaction - a novel approach using thermoporosimetry, Pharm. Res. 18, 1562-1569 (2001).
38. E. Berlin, P. Kliman and M. J. Pallansch, Changes in state of water in proteinaceous system, J. Colloid Interface Sci. 34, 488-494 (1970).
39. S. Park, R. A. Venditti, H. Jameel and J. J. Pawlak, Changes in pore size distribution during the drying of cellulose fibers as measured by differential scanning calorimetry, Carbohydrate Polym. 66, 97-103 (2006).
40. S. Park, R. A. Venditti, D. G. Abrecht, H. Jameel, J. J. Pawlak and J. M. Lee, Surface and pore structure modification of cellulose cibres through cellulase treatment, J. Appl. Polym. Sci. 103, 3833-3839 (2007).
41. S. Kim, K. Char and J. Hahn, Effect of pore generating materials on the electrical and mechanical properties of porous low-k films, Macromol. Res. 15, 1-4 (2007).
42. S. O. Han, D. H. Cho, W. H. Park and L. T. Drzal, Henequen/poly(butylene succinate) biocomposites: electron beam irradiation effects on henequen fiber and the interfacial properties of biocomposites, Composite Interfaces 13, 231-247 (2006).