Recent developments in cathode materials for lithium ion batteries

Journal of Power Sources

Volumn 195, Issue 4, 2010, Pages 939-954

  Fergus, Jeffrey W ^a  

^a AUBURN UNIVERSITY   (United States)

Author keywords

Cathodes; Cobalt; Lithium ion batteries; Manganese; Nickel

Indexed keywords

CATHODE MATERIALS; EFFECTIVE LIFETIME; HIGH CURRENTS; LITHIUM ION BATTERIES; LITHIUM IONS; LITHIUM-ION BATTERY; OLIVINE STRUCTURES; PERFORMANCE CHARACTERISTICS; TRANSITION-METAL OXIDES;

CATHODES; COBALT; COST REDUCTION; IONS; LITHIUM; LITHIUM ALLOYS; MANGANESE; MATERIALS; NICKEL ALLOYS; OLIVINE; SILICATE MINERALS; TRANSITION METAL COMPOUNDS;

LITHIUM COMPOUNDS;

EID: 71549168954     PISSN: 03787753     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jpowsour.2009.08.089     Document Type: Review

References (443)

1. Armand M., and Tarascon J.-M. Building better batteries. Nature 451 (2008) 652-657
2. Daniel C. Materials and processing for lithium-ion batteries. JOM 60 9 (2008) 43-48
3. Whittingham M.S. Materials challenges facing electrical energy storage. MRS Bull. 33 4 (2008) 411-419
4. Patil A., Patil V., Shin D.W., Choi J.-W., Paik D.-S., and Yoon S.-J. Issue and challenges facing rechargeable thin film lithium batteries. Mater. Res. Bull. 43 (2008) 1913-1942
5. Hassoun J., Reale P., and Scrosati B. Recent advances in liquid and polymer lithium-ion batteries. J. Mater. Chem. 17 (2007) 3668-3677
6. Shukla A.K., and Kumar T.P. Materials for next-generation lithium batteries. Curr. Sci. 94 (2008) 314-331
7. Abraham D.P., Furczon M.M., Kang S.-H., Dees D.W., and Jansen A.N. Effect of electrolyte composition on initial cycling and impedance characteristics of lithium-ion cells. J. Power Sources 180 (2008) 612-620
8. Stephan A.M., and Nahm K.S. Review on composite polymer electrolytes for lithium batteries. Polymer 47 (2006) 5952-5964
9. Knauth P. Inorganic solid Li ion conductors: an overview. Solid State Ionics 180 (2009) 911-916
10. Thangadurai V., and Weppner W. Recent progress in solid oxide and lithium ion conducting electrolytes research. Ionics 12 (2006) 81-92
11. Guyomard D. Advanced cathode materials for lithium batteries. Energy Storage Systems for Electronics. In: Osaka T., and Datta M. (Eds). New Trends in Electochemical Technology vol. 1 (2000), Gordon and Breach, Amsterdam 253-350
12. Whittingham M.S. Lithium batteries and cathode materials. Chem. Rev. 104 (2004) 4271-4301
13. Whittingham M.S. Inorganic nanomaterials for batteries. Dalton Trans. 40 (2008) 5424-5431
14. Bruce P.G., Scrosati B., and Tarascon J.-M. Nanomaterials for rechargeable lithium batteries. Angew. Chem. Int. Ed. 47 (2008) 2930-2946
15. Guo Y.-G., Hu J.-S., and Wan L.-J. Nanostructured materials for electrochemical energy conversion and storage devices. Adv. Mater. 20 (2008) 2878-2887
16. Wang Y., and Cao G. Developments in nanostructured cathode materials for high-performance lithium-ion batteries. Adv. Mater. 20 (2008) 2251-2269
17. Sides C.R., and Martin C.R. Nanomaterials in Li-ion battery electrode design. In: White R.E., Vayenas C.G., and Gamboa-Aldeco M.E. (Eds). Modern Aspects of Electrochemistry. vol. 8 (2007), Springer, New York, NY 75-126
18. 2: Formation, structure, lithium and oxygen nonstoichiometry, electrochemical behavior and transport properties. Solid State Ionics 170 (2004) 159-171
19. 2 single crystals. J. Solid State Chem. 141 (1998) 298-302
20. Belov D., and Yang M.-H. Investigation of the kinetic mechanism in overcharge process for Li-ion battery. Solid State Ionics 179 (2008) 1816-1821
21. Belov D., and Yang M.-H. Failure mechanism of Li-ion battery at overcharge conditions. J. Solid State Electrochem. 12 (2008) 885-894
22. 2 cell during safety test. J. Power Sources 175 (2008) 881-885
23. 2 cathode toward high capacity by elevating charging potential. J. Electrochem. Soc. 155 7 (2008) A537-A541
24. 2-based non-aqueous rechargeable batteries. Solid State Ionics 83 (1996) 167-173
25. 2 solid solution. J. Electrochem. Soc. 143 3 (1996) 1114-1123
26. 2 (R3m) for 4 volt secondary lithium cells. J. Electrochem. Soc. 141 11 (1994) 2677-2972
27. Zhou J., and Notten P.H.L. Studies on the degradation of Li-ion batteries by the use of microreference electrodes. J. Power Sources 177 (2008) 553-560
28. 2. Electrochem. Solid-State Lett. 11 11 (2008) A179-A182
29. 2. J. Electrochem. Soc. 155 11 (2008) A831-A838
30. 4 for lithium battery cathodes. J. Electrochem. Soc. 148 3 (2001) A224-A229
31. Amriou T., Khelifa B., Aourag H., Aouadi S.M., and Mathieu C. Ab initio investigation of the Jahn-Teller distortion effect on the stabilizing lithium intercalated compounds. Mater. Chem. Phys. 92 (2005) 499-504
32. 2. J. Power Sources 173 (2007) 556-561
33. 2 electrode materials: Structural, magnetic, and electrochemical studies. J. Electrochem. Soc. 143 4 (1996) 1168-1175
34. 2 prepared using succinic acid as a complexing agent. Inorg. Mater. 42 2 (2006) 202-209
35. 2 cathode material for lithium secondary battery. Mater. Chem. Phys. 113 (2009) 780-783
36. 2 cathode for lithium ion batteries with controlled sintering conditions. J. Appl. Electrochem. 39 (2009) 671-679
37. 2 for lithium batteries by a novel method. Mater. Chem. Phys. 107 (2008) 171-176
38. 2 by PLD for micro battery. Solid State Ionics 180 (2009) 636-643
39. 2: A new experimental technique using in situ x-ray diffraction and two-dimensional epitaxial film electrodes. Chem. Mater. 21 13 (2009) 2632-2640
40. 2 cathode materials. Electrochim. Acta 45 (1999) 285-294
41. 2 cathode materials. J. Electrochem. Soc. 147 11 (2000) 4078-4082
42. 2 by radiated polymer gel method and impact of deficient Li on its structure and electrochemical properties. J. Solid State Electrochem. 12 (2008) 1173-1178
43. 2. Chem. Mater. 21 13 (2009) 2733-2745
44. 2 cathode materials for lithium ion batteries. J. Solid State Electrochem. 13 (2009) 1157-1164
45. 2 solid solution cathodes. J. Power Sources 183 (2008) 749-754
46. Stewart S.G., Srinivasan V., and Newman J. Modeling the performance of lithium-ion batteries and capacitors during hybrid-electric-vehicle operation. J. Electrochem. Soc. 155 9 (2008) A664-A671
47. Martha S.K., Markevich E., Burgel V., Salitra G., Zinigrad E., Markovsky B., Sclar H., Pramovich Z., Heik O., Aurbach D., Exnar I., Buqa H., Drezen T., Semrau G., Schmidt M., Kovacheva D., and Saliyski N. A short review on surface chemical aspects of Li batteries: A key for a good performance. J. Power Sources 189 (2009) 288-296
48. 2 layered compounds. J. Power Sources 189 (2009) 248-255
49. 2 electrode material: A structural, magnetic and electrochemical study. Electrochim. Acta 54 (2009) 3211-3217
50. 2 powders. J. Power Sources 189 (2009) 40-44
51. 2 as cathode materials for lithium-ion batteries. J. Solid State Electrochem. 12 (2008) 323-327
52. 2. Solid State Ionics 180 (2009) 50-56
53. 2. Russ. J. Electrochem. 44 5 (2008) 543-549
54. 4 (Me = Cr, Co, Ni) spinels as cathodic materials for lithium-ion batteries. Russ. J. Electrochem. 45 2 (2009) 175-182
55. 2 (0 ≤ x ≤ 0.2) for high-voltage application of lithium-ion secondary batteries. J. Electrochem. Soc. 155 5 (2008) A374-A383
56. 2 as cathode materials for Li-ion batteries. J. Power Sources 189 (2009) 28-33
57. 2 (x + y ≤ 0.5) studied by in situ high temperature XRD. J. Electrochem. Soc. 155 12 (2008) A952-A958
58. Xiao J., Chernova N.A., and Whittingham M.S. Layered mixed transition metal oxide cathodes with reduced cobalt content for lithium ion batteries. Chem. Mater. 20 24 (2008) 7454-7464
59. 4 spinel materials for 5 V lithium secondary batteries via co-precipitation. J. Power Sources 189 (2009) 752-756
60. 4. J. Electroanal. Chem. 608 (2007) 8-14
61. 2. Electrochem. Solid-State Lett. 12 7 (2009) A140-A144
62. 2 system. Chem. Mater. 20 15 (2008) 4815-4825
63. 2 cathode materials. J. Power Sources 177 (2008) 177-183
64. 2 (z = 0.1-0.4 and x = 0.0-0.1) positive electrodes prepared by spray-drying method. J. Electrochem. Soc. 155 1 (2008) A82-A89
65. 2 at high potentials. J. Appl. Electrochem. 38 (2008) 893-896
66. Kang S.-H., Abraham D.P., Yoon W.-S., Nam K.-W., and Yang X.-Q. First-cycle irreversibility of layered Li-Ni-Co-Mn oxide cathode in Li-ion batteries. Electrochim. Acta 54 (2008) 684-689
67. Thackaray M.M., de Kock A., and David W.I.F. Synthesis and structural characterization of defect spinels in the lithium-manganese-oxide system. Mater. Res. Bull. 28 (1993) 1041-1049
68. 4 batteries with high power capability, improved cycle-life. J. Power Sources 186 (2009) 508-514
69. 4 lithium-ion battery system. J. Electrochem. Soc. 154 12 (2007) A1083-A1087
70. Takami N., Inagaki H., Kishi T., Harada Y., Fujita Y., and Hoshina K. Electrochemical kinetics and safety of 2-volt class Li-ion battery system using lithium titanium oxide anode. J. Electrochem. Soc. 156 2 (2009) A128-A132
71. 2 nanorods for lithium ion battery application. J. Power Sources 173 (2007) 538-544
72. 2. J. Power Sources 173 (2007) 707-711
73. Thackeray M.M. Spinel electrodes for lithium batteries. J. Am. Ceram. Soc. 82 12 (1999) 3347-3354
74. Matsushima T. Deterioration estimation of lithium-ion cells in direct current power supply systems and characteristics of 400-Ah lithium-ion cells. J. Power Sources 189 (2009) 847-854
75. Deng B., Nakamura H., and Yoshio M. Capacity fading with oxygen loss for manganese spinels upon cycling at elevated temperatures. J. Power Sources 180 (2008) 864-868
76. 4/graphite batteries stored at room temperature. J. Power Sources 189 (2009) 721-725
77. 4 thin film electrodes exposed to elevated temperatures. J. Power Sources 180 (2008) 539-545
78. 4 spinel synthesized by different methods. Russ. J. Electrochem. 45 5 (2009) 602-605
79. 4 (0 ≤ x ≤ 0.5) spinel as 5 V electrode material for lithium batteries. J. Electrochem. Soc. 148 7 (2001) A736-A760
80. 4 as cathode material for lithium-ion batteries. J. Electrochem. Soc. 145 3 (1998) 807-815
81. 4. J. Power Sources 189 (2009) 607-610
82. 4 nanosized powders. Mater. Res. Soc. Symp. Proc. 973 (2007) BB04-BB14
83. 3+, y = 0.01 and 0.06) spinels. Characterization and electrochemical behavior at 25 and at 55 °C in rechargeable lithium cells. J. Power Sources 191 (2009) 591-600
84. 4 prepared by sol-gel process. J. Alloys Compds 474 (2009) 473-476
85. 4 as cathode material for lithium ion batteries at elevated temperature. J. Power Sources 184 (2008) 583-588
86. 4 (Me: 3d-transition metal) having spinel-framework structures: a series of 5 volt materials for advanced lithium-ion batteries. J. Power Sources 81-82 (1999) 90-94
87. 4. J. Am. Ceram. Soc. 91 1 (2008) 342-345
88. Patoux S., Daniel L., Bourbon C., Lignier H., Pagano C., Le Cras F., Jouanneau S., and Martinet S. High voltage spinel oxides for Li-ion batteries: From the material research to the application. J. Power Sources 189 (2009) 344-352
89. 4 (0 ≤ x ≤ 1/3), a Li-ion battery cathode material. J. Electrochem. Soc. 155 11 (2008) A845-A850
90. 4 spinel: a high power electrode for Li-ion batteries. Dalton Trans. 40 (2008) 5471-5475
91. 4 spinel cathodes in lithium-ion cells. Chem. Mater. 21 8 (2009) 1695-1707
92. 4. Appl. Surf. Sci. 255 (2008) 2225-2229
93. 2 coating on the electrochemical performance of Li-Mn spinel. Electrochem. Comm. 11 (2009) 1101-1104
94. 4 active material with high capacity retention. Appl. Surf. Sci. 253 (2007) 8592-8596
95. 5 thin films, Thin Solid Film, in press, doi:10.1016/j.tsf.2009.04.063.
96. Li G., Pang S., Jiang L., Guo Z., and Zhang Z. Environmentally friendly chemical route to vanadium oxide single-crystalline nanobelts as a cathode material for lithium-ion batteries. J. Phys. Chem. B 110 19 (2006) 9383-9386
97. Feng C.Q., Wang S.Y., Zeng R., Guo Z.P., Konstantinov K., and Liu H.K. Synthesis of spherical porous vanadium pentoxide and its electrochemical properties. J. Power Sources 184 (2008) 485-488
98. 5 nanotubes as cathode material for lithium battery, J. Appl. Electrochem., in press, doi:10.1007/s10800-009-9910-6.
99. Wang Y., Takahashi K., Lee K.H., and Cao G.Z. Nanostuctures vanadium oxide electrodes for enahnced lithium-ion intercalation. Adv. Funct. Mater. 16 (2006) 1133-1144
100. 8. Phys. Rev. B 56 (1997) 10707-10710
101. 8 synthesized by solid-state routine with quenching in freezing atmosphere. Mater. Chem. Phys. 114 (2009) 915-919
102. 8 synthesized by microwave sol-gel route. Mater. Chem. Phys. 115 (2009) 707-711
103. 8, J. Solid State Electrochem., in press, doi:10.1007/s10008-009-0829-y.
104. 8 nanorods as cathode materials for rechargeable lithium batteries. J. Power Sources 192 (2009) 668-673
105. Padhi A.K., Nanjundaswamy K.S., and Goodenough J. Phospho-olivines and positive-electrode materials for rechargeable lithium batteries. J. Electrochem. Soc. 144 4 (1997) 1188-1194
106. 2+ redox couple in iron phosphates. J. Electrochem. Soc. 144 5 (1997) 1609-1613
107. 4: defects and related properties. Chem. Mater. 21 8 (2009) 1636-1644
108. Chen J., Vacchio M.J., Wang S., Chernova N., Zavalij P.Y., and Whittingham M.S. The hydrothermal synthesis and characterization of olivines and related compounds for electrochemical applications. Solid State Ionics 178 (2008) 1676-1693
109. 4. J. Electrochem. Soc. 155 4 (2008) A339-A344
110. 4 at room temperature. Adv. Funct. Mater. 19 (2009) 395-403
111. 4 materials. J. Electrochem. Soc. 155 12 (2008) A879-A886
112. 4 accounting for the solid solution range. J. Electrochem. Soc. 155 11 (2008) A866-A874
113. 4 materials. Chem. Mater. 20 22 (2008) 7164-7170
114. 4 phase transition. J. Solid State Electrochem. 12 (2008) 1031-1033
115. 4 (M = Fe, Mn). Chem. Mater. 20 19 (2008) 6189-6198
116. 4 crystals using electron energy-loss spectroscopy. Electrochem. Solid-State Lett. 12 8 (2009) A151-A154
117. 4 solid solutions: coupled lithium-ion and electron mobility. J. Am. Chem. Soc. 128 (2006) 11416-11422
118. 4: towards a defect chemical model. Solid State Ionics 178 (2008) 1831-1836
119. Zaghib K., Mauger A., Gendron F., and Julien C.M. Magnetic studies of phospho-olivine electrodes in relation with their electrochemical performance in Li-ion batteries. Solid State Ionics 179 (2008) 16-23
120. 4 cathode materials using ball-milling. J. Power Sources 179 (2008) 340-346
121. 4-based composite cathode materials for Li-ion batteries. J. Power Sources 173 (2007) 700-706
122. 2P) composite cathodes. Solid State Ionics 179 (2008) 1768-1771
123. 4/C. J. Power Sources 184 (2008) 444-448
124. 4/C composite for lithium rechargeable batteries. Solid State Ionics 179 (2008) 1897-1901
125. 2P on electrochemical performance of lithium iron phosphate-carbon composite synthesized by ball-milling and microwave heating. J. Power Sources 180 (2008) 546-552
126. 4 (M = Ti, Mg, Zr) annealed in an inert atmosphere. Electrochim. Acta 54 (2009) 3145-3151
127. 4 (0 ≤ x ≤1) cathode for Li rechargeable battery. J. Electrochem. Soc. 156 8 (2009) A635-A638
128. 4 (M = Mn, Fe, and Co) cathodes. J. Electrochem. Soc. 156 2 (2009) A79-A83
129. 4 cathodes. Electrochem. Solid-State Lett. 11 6 (2008) A89-A93
130. 2P cathode material by mechanical alloying. J. Power Sources 189 (2009) 435-439
131. 4 by in-situ synchrotron X-ray diffraction analysis. J. Power Sources 189 (2009) 790-793
132. 4/C synthesized by sol-gel technique. J. Power Sources 189 (2009) 391-396
133. 4/C composites for high power-density cathode materials. Electrochem. Commun. 11 (2009) 137-140
134. 4/carbon composite cathode materials synthesized by citrate gel technique for lithium-ion batteries. Mater. Sci. Eng. B 149 (2008) 93-98
135. 4/C materials prepared by mechanical activation. J. Power Sources 189 (2009) 59-65
136. 4. J. Power Sources 189 (2009) 397-401
137. 4 electrode materials for Li-ion batteries. J. Power Sources 189 (2009) 1154-1163
138. 3+) as cathode materials for lithium-ion cells. J. Electrochem. Soc. 155 10 (2008) A729-A732
139. 4/C composites and their electrochemical performance. J. Power Sources 194 (2009) 786-793
140. Chen G., Wilcox J.D., and Richardson T.J. Improving the performance of lithium manganese phosphate through divalent cation substitution. Electrochem. Solid-State Lett. 11 11 (2008) A190-A194
141. Liu X.-H., Saito T., Doi T., Okada S., and Yamaki J.-I. Electrochemical properties of rechargeable aqueous lithium ion batteries with an olivine-type cathode and a Nasicon-type anode. J. Power Sources 189 (2009) 706-710
142. 4/C composites with core-shell nanostructure. Electrochem. Commun. 11 (2009) 1183-1186
143. 4 solid solution. Electrochem. Commun. 10 (2008) 1347-1350
144. 4 cathode during first charge. Electrochem. Commun. 11 (2009) 913-916
145. 3 as cathode materials for lithium-ion batteries. Solid State Ionics 179 (2008) 1679-1682
146. 3 cathode material synthesized by a sol-gel method. Electrochim. Acta 52 (2007) 5251-5257
147. Huang H., Faulkner T., Barker J., and Saidi M.Y. Lithium metal phosphates, power and automotive applications. J. Power Sources 189 (2009) 748-751
148. 3/C cathode material by spray-drying and carbothermal method, J. Solid State Electrochem., in press, doi:10.1007/s10008-009-0882-6.
149. 4 cathode for Li-ion batteries. Electrochem. Solid-State Lett. 12 2 (2009) A33-A38
150. 4/C via V-doping. J. Power Sources 193 (2009) 841-845
151. 4 spinel and Si nanoparticles for advanced Li-ion batteries. Electrochem. Commun. 11 (2009) 1061-1064
152. 2 as aqueous lithium-ion battery electrodes. Electrochem. Commun. 11 (2009) 247-249
153. 4 and its application to lithium polymer battery. J. Electrochem. Soc. 155 12 (2008) A909-A914
154. 4 in aqueous and nonaqueous electrolyte solutions. J. Electrochem. Soc. 155 2 (2008) A144-A150
155. 4/C cathode materials. J. Power Sources 189 (2009) 779-782
156. 4/C composite from mechanical activation using sucrose as carbon source. Electrochim. Acta 54 (2009) 2861-2868
157. 4 cathodes for high-performance lithium batteries. Chem. Mater. 20 14 (2008) 4560-4564
158. 4 cathode materials with a continuous nano carbon network for lithium-ion batteries. J. Power Sources 184 (2008) 498-502
159. 4 cathode materials. J. Power Sources 189 (2009) 462-466
160. 4 cathode material for lithium-ion batteries. Mater. Chem. Phys. 115 (2009) 245-250
161. 4/composites as cathode materials for lithium-ion batteries. Electrochim. Acta 54 (2009) 4595-4599
162. 4/C-PPy composite at 55 °C. Electrochem. Commun. 11 (2009) 1277-1280
163. 2 with mesoporous structure via self-assembly in microemulsion. Electrochem. Solid-State Lett. 11 3 (2008) A30-A33
164. 2 synthesized from rapid thermal annealing method. Solid State Ionics 180 (2008) 612-615
165. Kim W., Cho J.-J., Kang Y., and Kim D.-W. Study on cycling performances of lithium-ion polymer cells assembled by in situ chemical cross-linking with star-shaped siloxane acrylate. J. Power Sources 178 (2008) 837-841
166. Shim E.-G., Nam T.-H., Kim J.-G., Kim H.-S., and Moon S.-I. Diphenyloctyl phosphate as a flame-retardant additive in electrolyte for Li-ion batteries. J. Power Sources 175 (2008) 533-539
167. 2 cathodes in lithium-ion batteries. J. Power Sources 173 (2007) 985-989
168. 4. Electrochem. Solid-State Lett. 12 6 (2009) A111-A114
169. Zhu C., Cheng H., and Yang Y. Electrochemical characterization of two types of PEO-based polymer electrolytes with room-temperature ionic liquids. J. Electrochem. Soc. 155 8 (2008) A569-A575
170. 4. Electrochem. Solid-State Lett. 11 8 (2008) A125-A128
171. 4/C microsphere by spray drying assisted template method. J. Power Sources 189 (2009) 794-797
172. Xie H., Tang Z., Li Z., He Y., Liu Y., and Wang H. PVDF-HFP composite polymer electrolyte with excellent electrochemical properties for Li-ion batteries. J. Solid State Electrochem. 12 (2008) 1497-1502
173. 4 prepared by hydrothermal method at different pH values. J. Power Sources 194 (2009) 536-540
174. 4 cathode materials for lithium rechargeable batteries, J. Appl. Electrochem., in press, doi:10.1007/s10800-009-9931-1.
175. 2 for Li-ion battery composite cathodes. J. Electrochem. Soc. 156 1 (2009) A48-A51
176. 2 cathode material for lithium secondary batteries. J. Solid State Electrochem. 12 (2008) 867-872
177. 2. J. Power Sources 188 (2009) 538-545
178. 2 as cathode material for Li-ion batteries. J. Power Sources 183 (2008) 741-748
179. J.H. Park, S.-Y. Lee, J.H. Ki, S. Ahn, J.-S. Park, Y.U. Jeong, Effect of conducting additives on the properties of composite cathodes for lithium-ion batteries, J. Solid State Electrochem., in press, doi:10.1007/s10008-009-0814-5.
180. 4-based lithium-ion batteries. J. Power Sources 185 (2008) 466-472
181. 4 spinel electrode exhibiting high power and stable cycling. Chem. Mater. 20 17 (2008) 5557-5562
182. 4 cathode material. Solid State Ionics 178 (2008) 1837-1842
183. 2 nanowire templates. Electrochem. Commun. 10 (2008) 1478-1481
184. Okumura T., Fukutsuka T., Uchimoto Y., Amezawa K., and Kobayashi S. Cathode having high rate performance for a secondary Li-ion cell surface-modified by aluminum oxide nanoparticles. J. Power Sources 189 (2009) 471-475
185. 4 by microemulsion route. J. Solid State Electrochem. 12 (2008) 1619-1627
186. 4 cathode materials. Solid State Ionics 180 (2009) 2132-2136
187. 4 (x = 0.00-0.40) via sol-gel synthesis and its electrochemical behaviour for use in Li-ion-batteries. Mater. Res. Bull. 43 (2008) 2119-2129
188. 4 (x = 0, 0.1, and 0.25). J. Electrochem. Soc. 156 8 (2009) A652-A660
189. y precursor powders. Mater. Chem. Phys. 112 (2008) 536-541
190. Eo S.-M., Cha E., and Kim D.-W. Effect of an inorganic additive on the cycling performances of lithium-ion polymer cells assembled with polymer-coated separators. J. Power Sources 189 (2009) 766-770
191. 2 composite cathodes. Solid State Ionics 179 (2008) 263-268
192. 2 cathode materials for Li-ion batteries, J. Solid State Electrochem., in press, doi:10.1007/s10008-008-0772-3.
193. Kim K., Ahn S., Kim H.-S., and Liu H.K. Electrochemical and thermal properties of 2,4,6-tris (trifluoromethyl)-1,3,5-triazine as a flame retardant additive in Li-ion batteries. Electrochim. Acta 54 (2009) 2259-2265
194. 2 cathode material by a slurry spray drying method. J. Power Sources 175 (2008) 564-569
195. 2. J. Power Sources 191 (2009) 628-632
196. Abdel-Ghany A., Zaghib K., Mauger A., Gendron F., Eid A.E., Abbas H., Hashem A.M., Ramana C.V., and Julien C.M. Electrochemical features of Li-Ni-Mn-Co oxides. Mater. Res. Soc. Symp. Proc. 973 (2007) BB04-05
197. 4/C composite powders by ultrasonic spray pyrolysis followed by heat treatment and their electrochemical properties. Mater. Res. Bull. 43 (2008) 3305-3317
198. 4/C synthesized by mechanical activation using sucrose as carbon source. J. Solid State Electrochem. 12 (2008) 799-805
199. 4/C composites. J. Solid State Electrochem. 12 (2008) 995-1001
200. 4 with different morphologies for Li-ion batteries. Electrochem. Solid-State Lett. 12 2 (2009) A39-A44
201. 4 cathode particles by coating with composite polypyrrole-polyethylene glycol layers, J. Solid State Electrochem., in press, doi:10.1007/s10008-008-0756-3.
202. 4/C composite cathode prepared from various polymer-containing precursors. J. Power Sources 193 (2009) 822-827
203. 4 rechargeable polymer battery using dual composite polymer electrolytes. J. Appl. Electrochem. 38 (2008) 39-42
204. 4 nanoparticles in polyol medium and their electrochemical properties. Electrochem. Solid-State Lett. 9 9 (2006) A439-A442
205. 4/C prepared by a sol-gel route with long- and short-chain carbon sources. J. Solid State Electrochem. 13 (2009) 921-926
206. 4 with enhanced performance synthesized by a novel synthetic route. J. Power Sources 184 (2008) 574-577
207. Wen Z., Huang S., Yang X., and Lin B. High rate electrode materials for lithium ion batteries. Solid State Ionics 179 (2008) 1800-1805
208. Fan L.-Z., Wang X.-L., and Long F. All-solid-state polymer electrolyte with plastic crystal materials for rechargeable lithium-ion battery. J. Power Sources 189 (2009) 775-778
209. 2 depend on the synthetic process and Li content. Solid State Ionics 179 (2008) 625-635
210. 2 depend on the synthetic process and Li content cathode material for lithium-ion batteries. J. Power Sources 188 (2009) 564-569
211. Albertus P., Christensen J., and Newman J. Experiments on and modeling of positive electrodes with multiple active materials for lithium-ion batteries. J. Electrochem. Soc. 156 7 (2009) A606-A618
212. Whitacre J.F., Zaghib K., West W.C., and Ratnakumar B.V. Dual active material composite cathode structures for Li-ion batteries. J. Power Sources 177 (2008) 528-536
213. 4, J. Solid State Electrochem., in press, doi:10.1007/s10008-009-0873-7.
214. 4 treatment. Electrochem. Commun. 11 (2009) 748-751
215. 2 as cathode materials for lithium batteries. J. Electrochem. Soc. 155 11 (2008) A839-A844
216. 2 (0 ≤ y ≤ 1 and 0 ≤ z ≤ 1) solid solution cathodes. J. Mater. Chem. 18 (2008) 190-198
217. 2 cathode for Li rechargeable batteries. J. Electrochem. Soc. 156 4 (2009) A328-A333
218. 2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries. J. Mater. Chem. 17 (2007) 4012-4016
219. 2 (0 ≤ x ≤ 0.7). Chem. Mater. 20 19 (2008) 6095-6106
220. 2 cathode series (0 < x < 1) synthesized by sucrose combustion process for high capacity lithium ion batteries. Mater. Res. Bull. 43 (2008) 3543-3552
221. 2 (0 ≤ x ≤ 0.9) as cathode materials for lithium ion batteries. J. Power Sources 184 (2008) 414-419
222. 2 electrode surfaces (M = Mn, Ni, Co) with mildly acidic, fluorinated solutions. J. Electrochem. Soc. 155 4 (2008) A269-A275
223. 2 cathode by blending with other lithium insertion hosts. J. Power Sources 191 (2009) 644-647
224. 2 cathode synthesized via co-precipitation for lithium secondary batteries. J. Power Sources 189 (2009) 571-575
225. 2 composite cathode materials obtained by mechanical activation. Russ. J. Electrochem. 45 3 (2009) 277-285
226. 2 composite cathode in Li-ion cells during charge-discharge cycling. J. Power Sources 192 (2009) 652-659
227. 2]. Mater. Chem. Phys. 111 (2008) 213-217
228. 2 in lithium rechargeable batteries. J. Appl. Electrochem. 39 (2009) 1487-1495
229. 4 as a cathode material for lithium battery applications. J. Power Sources 189 (2009) 494-498
230. 2 lithium-ion battery cathode materials. Mater. Chem. Phys. 109 (2008) 469-474
231. 5 composite cathodes with low irreversible capacity loss for lithium ion batteries. Electrochem. Commun. 11 (2009) 84-86
232. Stewart S., Albertus P., Srinivasan V., Plitz I., Pereira N., Amatucci G., and Newman J. Optimizing the performance of lithium titanate spinel paired with activated carbon or iron phosphate. J. Electrochem. Soc. 155 3 (2008) A253-A261
233. 12 cells. J. Power Sources 189 (2009) 499-502
234. 12 in a broad voltage window. J. Solid State Electrochem. 13 (2009) 1535-1539
235. 12 electrode. J. Power Sources 189 (2009) 145-148
236. 12 electrode in all-solid-state lithium secondary batteries. J. Electrochem. Soc. 156 2 (2009) A114-A119
237. Takada K., Ohta N., Zhang L., Fukuda K., Sakaguchi I., Ma R., Osada M., and Sasaki T. Interfacial modification for high-power solid-state lithium batteries. Solid State Ionics 179 (2008) 1333-1337
238. 12 for lithium ion battery. Mater. Chem. Phys. 105 (2007) 362-366
239. 4 spinel as 5 V materials. Electrochem. Commun. 11 (2009) 91-94
240. 2 fibers. Electrochem. Solid-State Lett. 11 8 (2008) A140-A144
241. 4 (M = Al, Bi and Cs ions) films for lithium ion batteries. Energy Convers. Manage. 50 (2009) 1556-1562
242. 4. Mater. Lett. 63 (2009) 581-583
243. 2 synthesized by the combustion method in an air atmosphere. J. Appl. Electrochem. 39 (2009) 617-625
244. 2, J. Alloys Compd., in press, doi:10.1016/j.jallcom.2009.04.155.
245. 3-based positive electrodes. J. Power Sources 174 (2007) 554-559
246. 3 positive electrode material. J. Electrochem. Soc. 154 7 (2007) A638-A648
247. 1.5O4 as 5 V cathode materials for lithium rechargeable. J. Electrochem. Soc. 156 3 (2009) A246-A252
248. 2 (M = Ti, Al, Fe) positive electrode materials. J. Electrochem. Soc. 156 3 (2009) A192-A198
249. 2 electrode materials for lithium ion batteries. J. Power Sources 194 (2009) 494-501
250. Wang H., Xia H., Lai M.O., and Lu L. Enhancements of rate capability and cyclic performance of spinel-LiNi0.5Mn1.5O4 by trace Ru-doping. Electrochem. Commun. 11 (2009) 1539-1542
251. 4/C cathode material for lithium-ion batteries. J. Alloys Compd. 481 (2009) 590-594
252. 4: a cathode material for 4 V lithium ion batteries. J. Power Sources 189 (2009) 786-789
253. Katiyar R.K., Singhal R., Asmar K., Valentin R., and Katiyar R.S. High voltage spinel cathode materials for high energy density and high rate capability Li ion rechargeable batteries. J. Power Sources 194 (2009) 526-530
254. 4-based positive electrode. J. Power Sources 185 (2008) 501-511
255. 4 cathode materials. J. Solid State Electrochem. 13 (2009) 913-919
256. 4 (y = 0, 0.3). J. Electrochem. Soc. 155 1 (2008) A14-A19
257. Grey C.P., and Dupré N. NMR studies of cathode materials for lithium-ion rechargeable batteries. Chem. Rev. 104 (2004) 4493-4512
258. 2 cathode materials. J. Power Sources 187 (2009) 586-590
259. 2 for lithium-ion cells. J. Electrochem. Soc. 156 7 (2009) A553-A562
260. 2 cathodes by Mg, Cr, and Al substitution. J. Solid State Electrochem. 13 (2009) 1381-1386
261. 5 between 3.8 V and 2.0 V. Solid State Ionics 180 (2009) 1198-1203
262. 3 as cathode materials for lithium-ion batteries. Electrochim. Acta 54 (2009) 5844-5850
263. 2 cathode materials for lithium-ion batteries. J. Alloys Compd. 476 (2009) 539-542
264. 4 for lithium battery positive electrode. J. Alloys Compd. 477 (2009) 498-503
265. 4 as a cathode active material for Li ion battery by step-by-step supersonic-wave. J. Power Sources 189 (2009) 114-120
266. 2 cathode material. Electrochim. Acta 54 (2009) 5796-5803
267. 4 by surface modification. J. Electrochem. Soc. 156 1 (2009) A66-A72
268. 4 cathode material. J. Power Sources 183 (2008) 334-338
269. 4 composite materials obtained by ZnO coating. J. Electrochem. Soc. 155 3 (2008) A211-A216
270. 4 shell. J. Solid State Electrochem. 12 (2008) 851-855
271. 2 (M = Mg and Zn) on electrochemical and storage characteristics. J. Electrochem. Soc. 155 3 (2008) A201-A205
272. 2 for lithium-Ion batteries. J. Electrochem. Soc. 156 6 (2009) A478-A482
273. 2 (M = Ni, Ga, Al and/or Ti) cathodes synthesized by the combustion method. J. Appl. Electrochem. 39 (2009) 807-814
274. 2 (y = 0, 0.11) electrode materials with pyrrolidinium-based ionic liquid electrolyte systems. J. Electrochem. Soc. 155 2 (2008) A172-A180
275. 2 structure: Effect of titanium substitution on physical and electrochemical properties. Chem. Mater. 20 10 (2008) 3404-3411
276. 2 (y = 0, 0.11) cathodes in methylpropyl pyrrolidinium bis(fluoro-sulfonyl)imide, LiTFSI electrolyte. J. Electrochem. Soc. 156 2 (2009) A120-A127
277. 4 compound, J. Alloys Compd., in press, doi:10.1016/j.jallcom.2009.04.141.
278. 4 cathode materials for lithium-ion batteries. J. Power Sources 189 (2009) 440-444
279. 2O waste slag. J. Power Sources 189 (2009) 681-684
280. 2 cathode material for lithium-ion battery. Solid State Ionics 179 (2008) 1794-1799
281. 2 cathodes for Li ion rechargeable batteries. J. Alloys Compd. 479 (2009) 561-568
282. 4/C composites. J. Solid State Electrochem. 12 (2008) 1017-1020
283. Meethong N., Kao Y.-H., Speakman S.A., and Chiang Y.-M. Aliovalent substitutions in olivine lithium iron phosphate and impact on structure and properties. Adv. Funct. Mater. 19 (2009) 1060-1070
284. 4. Chem. Mater. 20 22 (2008) 6313-6315
285. 2 for lithium secondary batteries. J. Appl. Electrochem. 38 (2008) 1477-1481
286. 4 by amphoteric oxides. J. Power Sources 180 (2008) 597-601
287. 4 thin-films by zirconium alkoxide/PMMA composites and their effects on electrochemical properties. J. Power Sources 185 (2008) 473-479
288. 2 prepared by solid state and coprecipitaion methods. Electrochim. Acta 54 (2009) 4655-4661
289. 2. J. Power Sources 176 (2008) 325-331
290. 2 modified by metal element substitution. Electrochim. Acta 54 (2009) 2353-2359
291. 2 (x = 0, 0.02, 0.05, 0.08, and 0.1) cathode materials for lithium-ion batteries. Solid State Ionics 180 (2009) 398-404
292. 2 with nonaqueous electrolyte. Electrochem. Solid-State Lett. 11 9 (2008) A155-A157
293. 2. J. Power Sources 189 (2009) 353-358
294. 2 positive electrode materials. J. Electrochem. Soc. 156 4 (2009) A343-A347
295. 2 by Ni and Al. Electrochem. Solid-State Lett. 12 4 (2009) A81-A83
296. 2 (0 ≤ y ≤ 0.2) cathode materials. ECS Trans. 11 29 (2008) 27-33
297. 2 positive electrode materials by multiple metal (Al, Mg) substitution. Electrochim. Acta 54 (2009) 3851-3856
298. 4 synthesized by a polymer-pyrolysis method. Electrochim. Acta 54 (2008) 545-550
299. 2. Chem. Mater. 21 1 (2009) 56-62
300. 2-based lithium-ion batteries. I. Analysis by electrochemical and spectroscopic examination. J. Electrochem. Soc. 156 4 (2009) A289-A293
301. 2-based lithium-ion batteries. II. Diagnostic analysis by electron microscopy and spectroscopy. J. Electrochem. Soc. 156 5 (2009) A371-A377
302. Shim J., Kostecki R., Richardson T., Song X., and Striebel K.A. Electrochemical analysis for cycle performance and capacity fading of a lithium-ion battery cycled at elevated temperature. J. Power Sources 112 (2002) 222-230
303. 2 (M = Al, Mn) cathode materials. ECS Trans. 11 29 (2008) 7-13
304. 2 coated with alumina. Solid State Ionics 179 (2008) 1745-1749
305. 2. J. Power Sources 174 (2007) 328-334
306. 2 cathode materials for lithium ion battery. Electrochem. Commun. 10 (2008) 1360-1363
307. 2 cathode materials for Li-ion batteries, J. Solid State Electrochem., in press, doi:10.1007/s10008-008-0772-3.
308. 2. J. Power Sources 176 (2008) 359-362
309. 4 cathode material. J. Power Sources 189 (2009) 1147-1153
310. 12 for lithium-ion cells. J. Power Sources 189 (2009) 279-287
311. 2 cathodes by surface modification using lanthanum aluminum garnet. J. Power Sources 184 (2008) 392-401
312. 3 coating. J. Electrochem. Soc. 155 10 (2008) A705-A710
313. 2 positive electrode material for lithium-ion battery. J. Electrochem. Soc. 155 10 (2008) A775-A782
314. 2 cathode in lithium-ion cells. J. Power Sources 179 (2008) 347-350
315. Amatucci G.G., and Pereira N. Fluoride based electrode materials for advanced energy storage devices. J. Fluorine Chem. 128 (2007) 243-262
316. 4. J. Electrochem. Soc. 155 9 (2008) A635-A641
317. 4 coating and using functional electrolyte. J. Power Sources 189 (2009) 519-521
318. 2 (x = 0.24 and 0.1) upon thermal annealing ≥200 °C. J. Power Sources 179 (2008) 780-784
319. 6 coating. Electrochem. Solid-State Lett. 12 8 (2009) A163-A166
320. 4 cathode materials for rechargeable lithium-ion batteries. J. Solid State Electrochem. 13 (2009) 301-307
321. 4 prepared via hydrothermal route. J. Power Sources 184 (2008) 543-547
322. 2 for lithium rechargeable batteries. Electrochim. Acta 54 (2009) 2877-2882
323. 2 cathode material. J. Alloys Compounds 475 (2009) 483-487
324. 2 cathode materials for lithium-ion battery. J. Electrochem. Soc. 155 7 (2008) A520-A525
325. 2-MgO coaxial fibers: co-electrospun fabrication, characterization and electrochemical properties. J. Mater. Chem. 17 (2007) 1767-1776
326. 2 cathode materials obtained by cationic exchange under hydrothermal conditions. J. Power Sources 184 (2008) 561-577
327. 4/C composites as cathode materials for lithium-ion batteries. J. Solid State Electrochem. 12 (2008) 815-823
328. 4 composites, J. Solid State Electrochem., in press, doi:10.1007/s10008-009-0875-5.
329. 2 cathode with high rate capability. Electrochim. Acta 54 (2009) 1654-1661
330. 2. J. Electroanal. Chem. 628 (2009) 73-80
331. 2 glassy layers. J. Electrochem. Soc. 156 1 (2009) A27-A32
332. 2 glasses. Electrochem. Solid-State Lett. 11 1 (2008) A1-A3
333. 5 electrolyte. J. Power Sources 189 (2009) 530-627
334. 3 for lithium-ion battery. J. Power Sources 189 (2009) 743-747
335. 4 cathode materials for rechargeable lithium batteries. J. Electroanal. Chem. 624 (2008) 197-204
336. 2 phase as cathode material for lithium ion battery. J. Power Sources 189 (2009) 697-701
337. 4 as cathode material for lithium ion battery with bismuth modification. J. Power Sources 184 (2008) 408-413
338. 4 cathode materials for rechargeable Li-ion batteries. J. Electrochem. Soc. 155 10 (2008) A760-A763
339. 2 (0 ≤ x ≤ 0.003) cathode materials for lithium ion batteries. Mater. Chem. Phys. 105 (2007) 47-52
340. 2 with orthorhombic structure as cathode materials. J. Power Sources 189 (2009) 411-414
341. Nakajima T. Surface modification of carbon anodes for secondary lithium battery by fluorination. J. Fluorine Chem. 128 (2007) 277-284
342. Pereira N., Badway F., Wartelsky M., Gunn S., and Amatucci G.G. Iron oxyfluorides as high capacity cathode materials for lithium batteries. J. Electrochem. Soc. 156 6 (2009) A407-A416
343. 4. Electrochem. Commun. 11 (2009) 1583-1585
344. 4 for 5 V cathode materials of lithium-ion battery. Mater. Res. Bull. 43 (2008) 3607-3613
345. Matsumoto K., Fukutsuka T., Okumura T., Uchimoto Y., Amezawa K., Inaba M., and Tasaka A. Electronic structures of partially fluorinated lithium manganese spinel oxides and their electrochemical properties. J. Power Sources 189 (2009) 599-601
346. z cathode material from oxalate precursors for lithium ion battery. J. Fluorine Chem. 128 (2007) 139-143
347. 0.2" materials by different routes: Is there fluorine substitution for oxygen?. J. Electrochem. Soc. 156 5 (2009) A349-A355
348. 2 cathode materials for Li-ion batteries. J. Power Sources 190 (2009) 149-153
349. 4. J. Electroanal. Chem. 631 (2009) 29-35
350. 2. Mater. Chem. Phys. 110 (2008) 406-410
351. 2 cathode material for lithium ion battery. J. Power Sources 189 (2009) 2-8
352. 2 cathode material for lithium-ion batteries. Solid State Ionics 179 (2008) 1750-1753
353. 4 and carbon nanocomposites for high power batteries. J. Power Sources 189 (2009) 149-154
354. 4 spinel at elevated temperature. ECS Trans. 11 29 (2008) 21-26
355. 4 cathode materials coated with high surface area carbon. J. Power Sources 189 (2009) 155-162
356. 4. J. Power Sources 189 (2009) 702-705
357. 4 cathode. J. Electrochem. Soc. 156 6 (2009) A401-A406
358. 4/C composite cathodes. J. Power Sources 189 (2009) 256-262
359. 4/C nanocomposite via microwave heating and its electrochemical Li intercalation performances. Electrochem. Commun. 11 (2009) 95-98
360. 4 cathode for lithium polymer batteries by hydrothermal method. J. Power Sources 178 (2008) 801-806
361. 4 prepared by polyacrylates-pyrolysis route. J. Power Sources 172 (2007) 913-918
362. 4 prepared by a carbothermal reduction method. J. Power Sources 184 (2008) 469-472
363. 4 and its use as a cathode material for lithium ion batteries. J. Alloys Compd. 480 (2009) 802-805
364. 3/C composite cathode material prepared from a sucrose-containing precursor. J. Appl. Electrochem. 38 (2008) 1453-1457
365. 4/C composite. Electrochim. Acta 54 (2009) 5770-5774
366. 4-multiwalled carbon nanotubes composite cathode materials for lithium polymer battery. Electrochem. Commun. 10 (2008) 1537-1540
367. 4-C/Li batteries. J. Solid State Electrochem. 12 (2008) 1549-1554
368. 4 composites for Li-ion batteries. J. Power Sources 180 (2008) 553-560
369. 4/graphite battery. J. Power Sources 184 (2008) 522-526
370. 4/C nanocrystals synthesis by organic molecules assisted supercritical water process molecules assisted supercritical water process. J. Power Sources 194 (2009) 1036-1042
371. 4/Li batteries. J. Solid State Electrochem. 12 (2008) 105-111
372. Ma S.-B., Nam K.-W., Yoon W.-S., Bak S.-M., Yang X.-Q., Cho B.-W., and Kim K.-B. Nano-sized lithium manganese oxide dispersed on carbon nanotubes for energy storage applications. Electrochem. Commun. 11 (2009) 1575-1578
373. 3 cathode materials with different carbon sources. Electrochim. Acta 54 (2009) 3374-3380
374. 4/C composites. Solid State Ionics 179 (2008) 1810-1815
375. Liang G., Wang L., Ou X., Zhao X., and Xu S. Lithium iron phosphate with high-rate capability synthesized through hydrothermal reaction in glucose solution. J. Power Sources 184 (2008) 538-542
376. 3/C positive material by one-step solid state reaction. Electrochim. Acta 54 (2009) 2253-2258
377. 4/C composite cathode materials synthesized via a carboxylic acid route. J. Power Sources 178 (2008) 807-814
378. 4/C composites and their electrochemical properties as cathode materials for lithium-ion batteries. J. Solid State Electrochem. 12 (2008) 825-833
379. 4 Li-ion battery cathodes. Electrochem. Solid-State Lett. 12 5 (2009) A99-A101
380. 4/C composite obtained by sonochemical method. Solid State Ionics 179 (2008) 415-419
381. 4 cathode in aqueous solvent with polyacrylic acid as a binder. J. Power Sources 189 (2009) 547-551
382. 4 as an optimum power cell material. J. Power Sources 189 (2009) 522-526
383. 4/C synthesized using polypyrrole as carbon source. J. Solid State Electrochem. 13 (2009) 1361-1366
384. Park K.-S., Schougaard S.B., and Goodenough J.B. Conducting-polymer/iron-redox-couple composite cathodes for lithium secondary batteries. Adv. Mater. 19 (2007) 848-851
385. 4 lithium rechargeable battery promoted by electrochemically active polymers electrochemically active polymers. Chem. Mater. 20 23 (2008) 7237-7241
386. 2 nanocomposites. J. Mater. Chem. 18 (2008) 3965-3971
387. 2 synthesized by polymer pyrolysis method. J. Solid State Electrochem. 12 (2008) 149-153
388. Lu C.-H., Wu T.-Y., Wu H.-C., Yang M.-H., Guo Z.-Z., and Taniguchi I. Preparation and electrochemical characteristics of spherical spinel cathode powders via an ultrasonic spray pyrolysis process. Mater. Chem. Phys. 112 (2008) 115-119
389. 4 spinel cathode material. J. Power Sources 193 (2009) 828-833
390. 4 prepared via coprecipitation. J. Electrochem. Soc. 155 6 (2008) A414-A420
391. 4 thin films prepared by an off-axis pulsed laser deposition technique. Thin Solid Films 517 (2009) 2618-2622
392. Tang K., Sun J., Yu X., Li H., and Huang X. Electrochemical performance of LiFePO4 thin films with different morphology and crystallinity. Electrochim. Acta 54 (2009) 6565-6569
393. 4 synthesized via a polyol method. J. Power Sources 189 (2009) 624-628
394. Nakamura K., Hirano H., Nishioka D., Endou S., Itsuki K., Michihiro Y., Moriga T., Kuwata N., and Kawamura J. Ionic diffusion and structural changes in lithium compounds. Solid State Ionics 180 (2009) 621-625
395. Nakamura K., Hirano H., Nishioka D., Michihiro Y., and Moriga T. Lithium ionic diffusion in lithium cobalt oxides prepared by mechanical milling. Solid State Ionics 179 (2008) 1806-1809
396. 2 as a high voltage, high-capacity Li-ion battery cathode material. Mater. Res. Bull. 44 (2009) 1990-1994
397. 4 cathode. J. Solid State Electrochem. 12 (2008) 295-302
398. 4 normal and nano powders. J. Power Sources 188 (2009) 274-280
399. 4 prepared via ball-milling. J. Power Sources 189 (2009) 169-178
400. Benoit C., and Franger S. Chemistry and electrochemistry of lithium iron phosphate. J. Solid State Electrochem. 12 (2008) 987-993
401. 4 materials-Part II: Electrochemical characterization. Solid State Ionics 179 (2008) 2383-2389
402. 4 cathode materials by hydrothermal method. Solid State Ionics 178 (2008) 1907-1914
403. 1/3O2 cathode material synthesized by a modified Pechini method for high-power lithium-ion batteries. J. Alloys Compd. 480 (2009) 696-701
404. 2 cathode nanoparticle size on high rate performance for Li-ion batteries. J. Electrochem. Soc. 156 6 (2009) A430-A434
405. 4-δ for high-voltage lithium batteries with expanded rate capability at high cycling temperatures. J. Power Sources 180 (2008) 852-858
406. 4 nanoparticles made by flame spray pyrolysis. Phys. Chem. Chem. Phys. 11 (2009) 3756-3761
407. 2. J. Power Sources 189 (2009) 783-785
408. 4 electrode for high-power applications, J. Appl. Electrochem., in press, doi:10.1007/s10800-009-9956-5.
409. Jiao F., Bao J., Hill A.H., and Bruce P.G. Synthesis of ordered mesoporous Li-Mn-O spinel as a positive electrode for rechargeable lithium batteries. Angew. Chem. 120 (2008) 1-7
410. Tonti D., Torralvo M.J., Enciso E., Sobrados I., and Sanz J. Three-dimensionally ordered macroporous lithium manganese oxide for rechargeable lithium batteries. Chem. Mater. 20 14 (2008) 4783-4790
411. 4 electrode materials for high power lithium ion batteries. Chem. Mater. 21 13 (2009) 2895-2903
412. 2-based electrodes for PHEV applications: an optimization. ECS Trans. 11 32 (2008) 1-9
413. 4 with spherical microscale particle having high volumetric capacity for lithium batteries. Electrochem. Solid-State Lett. 12 9 (2009) A181-A185
414. 4. Solid State Ionics 179 (2008) 1788-1793
415. 2 cathode powders prepared by combined process of gas-phase reaction and solid-state reaction methods. J. Power Sources 178 (2008) 387-392
416. 2 with high tap density by two-step drying method. Electrochem. Solid-State Lett. 11 12 (2008) A229-A232
417. Chang Z., Chen Z., Wu F., Tang H., Zhu Z., Yuan X.Z., and Wang H. Synthesis and properties of high tap-density cathode material for lithium ion battery by the eutectic molten-salt method. Solid State Ionics 179 (2008) 2274-2277
418. 2 as a cathode material for lithium battery by the rheological phase method. J. Power Sources 177 (2008) 439-444
419. 4/C composite cathode material for lithium batteries. J. Power Sources 194 (2009) 515-519
420. 4 nanowires for a lithium ion battery with high power density. Nano Lett. 9 3 (2009) 1045-1051
421. 4 from alpha manganese dioxide nanorods. J. Power Sources 184 (2008) 494-497
422. 4 particles. Electrochem. Solid-State Lett. 11 3 (2008) A25-A29
423. 2 cathode material prepared at 0 °C, J. Solid State Electrochem., in press, doi:10.1007/s10008-009-0874-6.
424. 2. Adv. Mater. 20 (2008) 2206-2210
425. Dudley N.J. Thin film micro-batteries. ECS Interface 17 3 (2008) 44-48
426. Song S.-W., Baek S.-W., Park H.Y., Lim Y.C., and Lee K.C. Structural changes in a thin-film lithium battery during initial cycling. Electrochem. Solid-State Lett. 11 5 (2008) A55-A59
427. 2 cathode after high-temperature cycling. Electrochem. Solid-State Lett. 11 5 (2008) A81-A83
428. 2 thin films prepared by RF magnetron sputtering. Solid State Ionics 179 (2008) 362-370
429. Kim J.M., Park G.B., Lee K.C., Park H.Y., Nam S.C., and Song S.W. Li-B-O-N electrolytes for all-solid-state thin film batteries. J. Power Sources 189 (2009) 211-216
430. 2 thin film for Li-ion batteries. Solid State Ionics 180 (2009) 900-903
431. 4 thin films prepared by pulsed laser deposition. J. Electrochem. Soc. 155 1 (2008) A20-A23
432. 4 thin films prepared by pulsed laser deposition. Electrochim. Acta 54 (2008) 376-381
433. 4 thin film cathode grown by pulsed laser deposition using CV, EIS and PITT techniques. Mater. Chem. Phys. 111 (2008) 149-153
434. 4 thin films prepared by radio frequency magnetron sputtering. J. Power Sources 180 (2008) 576-581
435. 4 thin film cathodes prepared by solution deposition. Electrochem. Commun. 11 (2009) 695-698
436. 4. Solid State Ionics 179 (2008) 2011-2015
437. Dunn B., Long J.W., and Rolison D.R. Rethinking multifunction in three dimensions for miniaturizing electrical energy storage. ECS Interface 17 3 (2008) 49-53
438. Notten P.H.L., Roozeboom F., Niessen R.A.H., and Baggetto L. 3-D integrated all-solid-state rechargeable batteries. Adv. Mater. 19 (2007) 4564-4567
439. Cheng F., Tao Z., Liang J., and Chen J. Template-directed materials for rechargeable lithium-ion batteries. Chem. Mater. 20 3 (2008) 667-681
440. 4 prepared from biomimetic porous carbonates and their application to a cathode for lithium-ion batteries. J. Mater. Chem. 19 (2009) 4012-4016
441. 4/C by microwave processing, J. Solid State Electrochem., in press, doi:10.1007/s10008-008-0762-5.
442. Lee Y.J., Yi H., Kim W.-J., Kang K., Yun D.S., Strano M.S., Ceder G., and Belcher A.M. Fabricating genetically engineered high-power lithium-ion batteries using multiple virus genes. Science 324 (2009) 1051-1055
443. Nam K.T., Kim D.-W., Yoo P.J., Chiang C.-Y., Meethong N., Hammond P.T., Chiang Y.-M., and Belcher A.M. Virus-enabled synthesis and assembly of nanowires for lithium ion battery electrodes. Science 312 (2006) 885-888