Studies on morphology and thermomechanical behavior of polyethylene glycol/1,8-octanediol-modified epoxy-organoclay hybrid nanocomposites

Journal of Composite Materials

Volumn 43, Issue 23, 2009, Pages 2753-2770

  Chozhan, C Karikal ^a   Elumalai, P ^a   Alagar, M ^a  

^a ANNA UNIVERSITY   (India)

Author keywords

1,8 octanediol; Epoxy resin; Glass transition temperature; Impact strength; Mechanical properties; Morphology; Polyethylene glycol; Thermal stability

Indexed keywords

1,8-OCTANEDIOL; ASTM STANDARDS; BISPHENOL A EPOXY RESIN; CHAR YIELD; CURING AGENTS; DIAMINODIPHENYLMETHANE; DIFFERENTIAL SCANNING CALORIMETERS; DIGLYCIDYL ETHER; EPOXY SYSTEMS; GLASS TRANSITION TEMPERATURE; HYBRID NANOCOMPOSITES; MODIFIED EPOXY; NANOHYBRIDS; SCANNING ELECTRON MICROSCOPE; STORAGE MODULI; THERMAL BEHAVIORS; THERMAL STABILITY; THERMO-MECHANICAL BEHAVIORS;

DIFFERENTIAL SCANNING CALORIMETRY; DYNAMIC ANALYSIS; DYNAMIC MECHANICAL ANALYSIS; ETHERS; GLASS; GLASS TRANSITION; IMPACT STRENGTH; MECHANICAL PROPERTIES; MORPHOLOGY; NANOCOMPOSITES; ORGANOCLAY; PHENOLS; POLYETHYLENE GLYCOLS; POLYETHYLENE OXIDES; POLYETHYLENES; RESINS; SCANNING ELECTRON MICROSCOPY; SUPERCONDUCTING TRANSITION TEMPERATURE; SYSTEM STABILITY; THERMODYNAMIC STABILITY; THERMOGRAVIMETRIC ANALYSIS; THERMOPLASTICS; X RAY DIFFRACTION ANALYSIS;

EPOXY RESINS;

EID: 71049142620     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998309345304     Document Type: Article

References (63)

1. Kinjo, N., Ogata, M., Nishi, N. and Kandeda, A. (1989). Advances in Polymer Science, Springer, Berlin.
2. Bucknall, C.B. (1990). Toughened Plastics, Applied Science Publishers, London.
3. Ellis, B. (1993). Chemistry and Technology of Epoxy Resin, Academic Press, London.
4. Wong, C.P. (1990). Advances in Polymer Science, Springer, Berlin.
5. Pearce, P.J., Ennis, B.C. and Morris, C.E.M. (1988). Tough, High Temperature Aerospace Epoxy Resin System, Polymer Communication, 29: 93-98.
6. Choi, J., Yee, A.F. and Laine, R.M. (2004). Toughening of Cubic Silsesquioxanxe Epoxy Nanocomposites using Core Shell Rubber Particles; A Three Component Hybrid System, Macromolecules, 37: 3267-3276.
7. Yu, Y., Zhang, Z., Gan, W., Wang, M. and Li, S. (2003). Effect of Polyethersulfone on the Mechanical and Rheological Properties of Polyetherimide-modified Epoxy Systems, Industrial and Engineering Chemistry Research, 42: 3250-3256.
8. Peters, R.A. and Logan, T.J. (1975). Microvoid Epoxy Adhesives for High Peel and Shear Strength, Adhesives Age, 18: 17-21.
9. Meeks, A.C. (1974). Fracture and Mechanical Properties of Epoxy Resins and Rubber-modified Epoxy Resins, Polymer, 15: 675-681.
10. Yee, A.F. and Pearson, R.A. (1986). Toughening Mechanisms in Elastomer-modified Epoxies Part 1 Mechanical Studies, Journal of Materials Science, 21: 2462-2474.
11. Pearce, P.J., Ennis, B.C. and Morris, C.E.M. (1988). Tough, High Temperature Aerospace Epoxy Resin System, Polymer Communication, 29: 93-98.
12. Alagar, M., Ashok Kumar, A., Mahesh, K.P.O. and Dinakaran, K. (2000). Studies on Thermal and Morphological Characteristics of E-glass/Kevlar 49 Reinforced Siliconized Epoxy Composites, European Polymer Journal, 36: 2449-2454.
13. Ashok Kumar, A., Alagar, M. and Rao, R.M.V.G.K. (2001). A Comparative Study of the Preparation and Characterization of Aromatic and Aliphatic Bismaleimides to Produce Modified Siliconized Epoxy Intercrosslinked Matrices for Engineering Applications, Materials and Manufacturing Processes, 16: 561-576.
14. Ashok Kumar, A., Alagar, M. and Rao, R.M.V.G.K. (2001). Preparation and Characterization of Siliconized Epoxy/Bismaleimide (N,Ń-bismaleimido-4, 4'-diphenyl methane) Intercrosslinked Matrices for Engineering Applications, Journal of Applied Polymer Science, 81: 38-46. (Pubitemid 32495934)
15. Ashok Kumar, A., Alagar, M. and Rao, R.M.V.G.K. (2002). Synthesis and Characterization of Siliconized Epoxy-1,3-Bis(Maleimido) Benzene Intercrosslinked Matrix Materials, Polymer, 43: 693-702.
16. Dinakaran, K. and Alagar, M. (2002). Preparation and Characterization of Bismaleimide (N,Ń-bismaleimido-4,4'-diphenyl methane)-Vinyl Ester Oligomer Modified Unsaturated Polyester Interpenetrating Matrices for Advanced Composites, Journal of Applied Polymer Science, 86: 2502-2508.
17. Ashok Kumar, A., Dinakaran, K. and Alagar, M. (2003). Preparation and Characterization of Siliconized Epoxy-1,2-Bis(Maleimido) Ethane Intercrosslinked Matrix Materials, Journal of Applied Polymer Science, 89: 3808-3817.
18. Suresh Kumar, R. and Alagar, M. (2006). Studies on Mechanical, Thermal and Morphological of Diglycidylether Terminated Polydimethylsiloxane Modified Epoxy - Bismaleimide Matrices, Journal of Applied Polymer Science, 101: 668-674.
19. Karikal Chozhan, C., Alagar, M., Josephine Sharmila, R. and Gnanasundaram, P. (2007). Thermo Mechanical Behaviour of Unsaturated Polyester Toughened Epoxy-clay Hybrid Nanocomposites, Journal of Polymer Research, 14: 319-328.
20. Karikal Chozhan, C., Alagar, M. and Gnanasundaram, P. (2008). Synthesis and Characterization of Bis(3-Vinyl ester-2-hydroxy propane) Ether - Terminated Poly(dimethylsiloxane) Toughened Epoxy-clay Hybrid Nanocomposites, Polymers and Polymer Composites, 16: 283-294.
21. Rajasekaran, R. and Alagar, M. (2008). Bismaleimides (1, 3-Bismaleimidobenzene and 1,1'- Bis (4-maleimidophenyl) Cyclohexane) Modified Polyethersulfone/Epoxy Matrices for Engineering Applications, Journal of Composite Materials, 42: 1031-1043.
22. Rajasekaran, R. and Alagar, M. (2007). Mechanical Properties of Bismaleimides Modified Polysulfone Epoxy Matrices for Engineering Applications, International Journal of Polymeric Materials, 56: 911-927.
23. Rajasekaran, R., Karikal Chozhan, C. and Alagar, M. (2008). Preparation and Characterization of 3,3'-Bis(Maleimidophenyl)Phenylphosphine Oxide (BMI/Polysulfone Modified Epoxy Intercrosslinked Matrices, Polymer Composites, 29: 773-781.
24. Karikal Chozhan, C., Rajasekaran, R., Alagar, M. and Gnanasundaram, P. (2008). Thermomechanical Behavior of Vinyl Ester Oligomer-toughened Epoxy-clay Hybrid Nanocomposites, International Journal of Polymeric Materials, 57: 319-337.
25. Premkumar, S., Karikal Chozhan, C. and Alagar, M. (2008). Studies on Thermal, Mechanical and Morphological Behaviour of Caprolactam Blocked Methylenediphenyl Diisocyanate Toughened Bismaleimide Modified Epoxy Matrices, European Polymer Journal, 44: 2599-2607.
26. Martinez, I., Martin, M.D., Eceiza, A., Oyanguren, P. and Mondragon, I. (2000). Phase Separation in Polysulfone-modified Epoxy Mixtures. Relationships Between Curing Conditions, Morphology and Ultimate Behavior, Polymer, 41: 1027-1035.
27. Hodgkin, J.H., Simon, G.P. and Varley, R. (1998). Thermoplastic Toughening of Epoxy Resins: A Critical Review, Polymers for Advanced Technologies, 9: 3-10.
28. Mimura, K., Ito, H. and Fujuka, H. (2000). Improvement of Thermal and Mechanical Properties by Control of Morphologies in PES-modified Epoxy Resins, Polymer, 41: 4451-4459.
29. Ratna, D. and Simon, G.P. (2001). Thermomechanical Properties and Morphology of Blends of a Hydroxyl-functionalized Hyperbranched Polymer and Epoxy Resin, Polymer, 42: 8833-8839. (Pubitemid 32728818)
30. Ratna, D., Varley, R., Singh, R.K. and Simon, G.P. (2003). Studies on Blends of Epoxy-functionalized Hyperbranched Polymer and Epoxy Resin, Journal of Material Science, 38: 147-154.
31. Giannotti, M.I., Foresti, M.L., Mondragon, I., Galante, M.J. and Oyanguren, P.A. (2004). Reaction-Induced Phase Separation in Epoxy/Polysulfone/Poly(Ether imide) Systems, I. Phase Diagrams, Journal of Polymer Science Part B: Polymer Physics, 42: 3953-3963.
32. Lijima, T., Tochiomoto, T. and Tomi, M. (1991). Modification of Epoxy Resins with Poly(aryl ether ketone)s, Journal of Applied Polymer Science, 43: 1685-1692.
33. Yee, A.F. and Pearson, R.A. (1986). Toughening Mechanisms in Elastomer-modified Epoxies Part 1. Mechanical Studies, Journal of Material Science, 21: 2462-2474.
34. Lijima, T., Tomoi, M., Tochimoto, T. and Kakiuchi, H. (1991). Toughening of Epoxy Resins by Modification with Aromatic Polyesters, Journal of Applied Polymer Science, 43: 463-474. (Pubitemid 21666984)
35. Giannotti, M.I., Mondragon, I., Galente, M.J. and Oyanguren, P.A. (2004). Reaction-induced Phase Separation in Epoxy/Polysulfone/Poly(ether imide) Systems. II. Generated Morphologies, Journal of Polymer Science Part B: Polymer Physics, 42: 3964-3975.
36. Luo, X., Zheng, S., Zhang, N. and Ma, D. (1994). Miscibility of Epoxy Resins/Poly(Ethylene Oxide) Blends Cured with Phthalic Anhydride, Polymer, 35: 2619-2623.
37. Sheth, M., Kumar, R.A., Dave, V., Gross, R.A. and McCarthy, S.P.J. (1997). Biodegradable Polymer Blends of Poly(Lactic Acid) and Poly(Ethylene Glycol), Journal of Applied Polymer Science, 66: 1495-1505.
38. Younes, H. and Cohn, D. (1988). Phase Separation in Poly(ethylene glycol)/Poly(lactic acid) Blends, European Polymer Journal, 24: 765-773.
39. Hu, Y., Hu, Y.S.M., Topolkararev, V., Hiltner, A. and Baer, E. (2003). Aging of Poly(lactide)/Poly(ethylene glycol) iBlends. Part 2. Poly(lactide) with High Stereo Regularity, Polymer, 44: 5711-5720. (Pubitemid 37046075)
40. Hu, Y., Rogunova, M., Hu, Y.S.M., Topolkararev, V., Hiltner, A. and Baer, E. (2003). Aging of Poly(lactide)/Poly(ethylene glycol) Blends. Part 1. Poly(lactide) with Low Stereoregularity, Polymer, 44: 5701-5710. (Pubitemid 37046074)
41. Bairado, M., Frisoni, G., Scandalo, M., Rimelen, M., Lips, D., Ruffieux, K. and Wintermantel, E. (2003). Thermal and Mechanical Properties of Plasticized Poly(L-lactic acid), Journal Applied Polymer Science, 90: 1731-1738.
42. Ratna, D., Samui, A.B. and Chakraborty, B.C. (2004). Flexibility Improvement of Epoxy Resin by Chemical Modification, Polymer International, 53: 1882-1887.
43. Murali, M., Ratna, D., Samui, A.B. and Chakraborty, B.C. (2007). Synthesis, Characterization, and Evaluation of Carboxyl-terminated Poly(Ethylene Glycol) Adipate-modified Epoxy Networks: Effect of Molecular Weight, Journal of Applied Polymer Science, 103: 1723-1730.
44. Lee, A. and Lichtenhen, J.D. (1999). Thermal and Viscoelastic Property of Epoxy-clay and Hybrid Inorganic-organic Epoxy Nanocomposites, Journal of Applied Polymer Science, 73: 1993-2001.
45. Tseng, C.R., Wu, J.Y., Lee, H.Y. and Chang, F.C. (2001). Preparation and Crystallization Behavior of Syndiotactic Polystyrene-clay Nanocomposites, Polymer, 42: 10063-10070.
46. Chen-Yang, Y.W., Yang, H.C., Li, G.J. and Li, Y.K. (2004). Thermal and Anticorrosive Properties of Polyurathane/Clay Nanocomposites, Journal of Polymer Research, 11: 275-283.
47. Lebaron, P.C., Wang, Z. and Pinnavaia, T.J. (1999). Polymer-layered Silicate Nanocomposites: An overview, Applied Clay Science, 15: 11-29.
48. Giannelis, E.P. (1996). Polymer Layered Silicate Nanocomposites, Advanced Materials, 8: 29-35.
49. Fu, X. and Qutubuddin, S. (2000). Synthesis of Polystyrene-clay Nanocomposites, Materials Letters, 42: 12-15.
50. Yano, K., Usuki, A. and Okada, A. (1997). Synthesis and Properties of Polyimide-clay Hybrid Films, Journal of Polymer Science Part A: Polymer Chemistry, 35: 2289-2294.
51. Gilman, J.W., Kashiwagi, T. and Lichtenhan, J.D. (1997). Nanocomposites. A Revolutionary New Flame Retardant Approach, SAMPE J, 33: 40-46.
52. Dinakaran, K. and Alagar, M. (2003). Preparation and Characterization of Epoxy-cyanate Ester Interpenetrating Network Matrices/Organoclay Nanocomposites, Polymers for Advanced Technologies, 14: 574-585.
53. Musto, P., Ragosta, G., Russo, P. and Mascia, L. (2001). Thermal-oxidative Degradation of Epoxy and Epoxy-bismaleimide Networks: Kinetics and Mechanism, Macromolecular Chemistry and Physics, 202: 3445-3458.
54. Brown, J.M., Curliss, D. and Vaia, R.A. (2000). Thermoset-layered Silicate Nanocomposites. Quaternary Ammonium Montmorillonite with Primary Diamine Cured Epoxies, Chemistry of Materials, 12: 3376-3384.
55. Zulfiqar, S., Lieberwirth, I., Ahmad, Z. and Sarwar, M.I. (2008). Influence of Oligomerically Modified Reactive Montmorillonite on Thermal and Mechanical Properties of Aromatic Polyamide-clay Nanocomposites, Acta Materialia, 56: 4905-4912.
56. Park, J. and CJana, S. (2003). Effect of Plasticization of Epoxy Networks by Organic Modifier on Exfoliation of Nanoclay, Macromolecules, 36: 8391-8397.
57. Hussain, M., Varley, R.J., Mathys, Z., Cheng, B. and Simon, G.P. (2004). Effect of Organo-phosphorus and Nano-clay Materials on The Thermal and Fire Performance of Epoxy Resins, Journal of Applied Polymer Science, 91: 1233-1253.
58. Kailiang, Z., Wang, L., Wang, F. and Wang, G. (2004). Preparation and Characterization of Modified Clay Reinforced and Toughened Epoxy Resin Nanocomposites, Journal of Applied Polymer Science, 91: 2649-2652.
59. Mourchid, A., Lecolier, E., VanDamme, H. and Levitz, P. (1998). On Viscoelastic, Birefringent, and Swelling Properties of Laponite Clay Suspensions: Revisited Phase Diagram, Langmuir, 14: 4718-4723.
60. Krishnamoorthi, R. and Giannelis, E.P. (1997). Rheology of End-tethered Polymer Layered Silicate Nanocomposites, Macromolecules, 30: 4097-4102.
61. Ratna, D., Becker, O., Krishnamurthy, R., Simon, G.P. and Varley, R.J. (2003). Nanocomposites Based on a Combination of Epoxy Resin Hyper Branched Epoxy and a Layered Silicate, Polymer, 44: 7449-7457.
62. Gilman, J.W., Kashiwagi, T., Pinnavaia, T.J. and Beall, G.W. (eds) (2000). Polymer-clay Nanocomposites, p. 193, Wiley, New York.
63. Zulfiqar, S., Ahmad, Z. and Sarwar, M.I. (2007). Soluble Aromatic Polyamide Bearing Ether Linkages: Synthesis and Characterization, Colloidal Polymer Science, 285: 1749-1754.