Manufacturing metallic parts with designed mesostructure via three-dimensional printing of metal oxide powder

18th Solid Freeform Fabrication Symposium, SFF 2007

Volumn , Issue , 2007, Pages 586-596

  Williams, Christopher B ^a   Rosen, David W ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Additive manufacturing; Cellular materials; Designed mesostructure; Three dimensional printing

Indexed keywords

3D PRINTERS; MARAGING STEEL; METAL OXIDE CERAMICS; PRINTING;

ADDITIVE MANUFACTURING; CELLULAR MATERIAL; HIGH STRENGTH; MESOSTRUCTURES; METAL OXIDE POWDERS; METALLIC CELLULAR MATERIALS; METALLIC PART; THREE-DIMENSIONAL PRINTING;

CELLULAR MANUFACTURING;

EID: 70449697157     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (30)

1. Banhart, J., 2000, "Manufacturing Routes for Metallic Foams, " The Member Journal of the Minerals, Metals & Materials Society, Vol. 52, No. 12, pp. 22-27.
2. Wang, H. V., S. R. Johnston and D. W. Rosen, 2006, "Design of a Graded Cellular Structure for an Acetabular Hip Replacement Component, " 17th Solid Freeform Fabrication Symposium, Austin, TX, pp. 111-123.
3. Wang, H. and D. W. Rosen, 2002, "Computer-Aided Design Methods for Additive Fabrication of Truss Structures, " International Conference on Manufacturing Automation, Hong Kong.
4. Williams, C. B., F. M. Mistree and D. W. Rosen, 2005, "Investigation of Solid Freeform Fabrication Processes for the Manufacture of Parts with Designed Mesostructure, " ASME IDETC Design for Manufacturing and the Life Cycle Conference, Long Beach, California, DETC2005/DFMLC- 84832.
5. Brooks, W., C. Sutcliffe, W. Cantwell, P. Fox, J. Todd and R. Mines, 2005, "Rapid Design and Manufacture of Ultralight Cellular Materials, " 16th Solid Freeform Fabrication Symposium, Austin, TX., pp. 231-241.
6. Cansizoglu, O., D. Cormier, O. Harrysson, H. West and T. Mahale, 2006, "An Evaluation of Non- Stochastic Lattice Structures Fabricateed Via Electron Beam Melting, " Solid Freeform Fabrication, Austin, TX, pp. 209-2119.
7. Robinson, C. J., C. Zhang, G. D. Janaki Ram, E. J. Siggard, B. Stucker and L. Li, 2007, "Maximum Height to Width Ratio of Freestanding Structures Built Using Ultrasonic Consolidation, " Solid Freeform Fabrication Symposium, Austin, TX., pp. 502-516.
8. Cochran, J. K., K. J. Lee, D. L. McDowell and T. H. Sanders, 2002, "Multifunctional Metallic Honeycombs by Thermal Chemical Processing, " Processing and Properties of Lightweight Cellular Metals and Structures (TMS), pp. 127-136.
9. Cochran, J. K., K. J. Lee and T. H. Sanders, 2003, "Metallic Articles Formed by Reduction of Nonmetallic Articles and Method of Producing Metallic Articles, " US 6, 582, 651 B1, USA, Georgia Tech Research Corporation.
10. Cochran, J. K., K. J. Lee, D. McDowell, T. H. Sanders, B. Church, J. Clark, B. Dempsey, K. Hurysz, T. McCoy, J. Nadler, R. Oh, W. Seay and B. Shapiro, 2000, "Low Density Monolithic Metal Honeycombs by Thermal Chemical Processing, " Fourth Conference on Aerospace Materials, Processes, and Environmental Technology, Huntsville, AL.
11. Williams, C. B., F. M. Mistree and D. W. Rosen, 2005, "Towards the Design of a Layer-Based Additive Manufacturing Process for the Realization of Metal Parts of Designed Mesostructure, " 16th Solid Freeform Fabrication Symposium, Austin, TX, pp. 217-230.
12. Williams, C. B. and D. W. Rosen, 2007, "Manufacturing Cellular Materials via Three-Dimensional Printing of Spray-Dried Metal Oxide Ceramic Powder, " 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal.
13. Yoo, J., M. J. Cima, S. Khanuja and E. M. Sachs, 1993, "Structural Ceramic Components by 3D Printing, " Solid Freeform Fabrication Symposium, Austin, TX., pp. 40-50.
14. Carrion, A., 1997, "Technology Forecast on Ink-Jet Head Technology Applications in Rapid Prototyping, " Rapid Prototyping Journal, Vol. 3, No. 3, pp. 99-115.
15. Agarwala, M. K., V. R. Jamalabad, N. A. Langrana, A. Safari, P. J. Whalen and S. C. Danforth, 1996, "Structural Quality of Parts Processed by Fused Deposition, " Rapid Prototyping Journal, Vol. 2, No. 4, pp. 4-19.
16. Wright, M. J. and J. R. G. Evans, 1999, "Ceramic Deposition Using an Electromagnetic Jet Printer Station, " Journal of Materials Science Letters, 18, pp. 99-101.
17. Seerden, K. A. M., N. Reis, J. R. G. Evans, P. S. Grant, J. W. Halloran and B. Derby, 2001, "Ink-Jet Printing of Wax-Based Alumina Suspensions, " Journal of the American Ceramic Society, Vol. 84, No. 11, pp. 2514-2520.
18. Lewis, J. A., 2000, "Colloidal Processing of Ceramics, " Journal of the American Ceramic Society, Vol. 83, No. 10, pp. 2341-2359.
19. Griffith, M. L. and J. W. Halloran, 1996, "Freeform Fabrication of Ceramics via Stereolithography, " Journal of the American Ceramic Society, Vol. 79, No. 10, pp. 2601-2608.
20. Utela, B., R. L. Anderson and H. Kuhn, 2006, "Advanced Ceramic Materials and Three-Dimensional Printing (3DP), " 17th Solid Freeform Fabrication Symposium, Austin, TX, pp. 290-303, pp. 290- 303.
21. Grida, I. and J. R. G. Evans, 2003, "Extrusion Freeforming of Ceramics through Fine Nozzles, " Journal of European Ceramic Society, Vol. 23, pp. 629-635.
22. Grau, J., J. Moon, S. Uhland, M. J. Cima and E. Sachs, 1997, "High Green Density Ceramic Components Fabricated by the Slurry-Based 3DP Process, " Solid Freeform Fabrication Symposium, Austin, TX., pp. 371-378.
23. Kernan, B. D., E. M. Sachs, M. A. Oliveira and M. J. Cima, 2003, "Three Dimensional Printing of Tungsten Carbide-Cobalt Using a Cobalt Oxide Precursor, " Solid Freeform Fabrication Symposium, Austin, TX., pp. 616-631.
24. Moon, J., J. Grau and M. J. Cima, 2000, "Slurry Chemistry Control to Produce Easily Redispersible Ceramic Powder Compacts, " Journal of the American Ceramic Society, Vol. 83, No. 10, pp. 2401- 2408.
25. Reed, J. S., 1995, Principles of Ceramics Processing, John Wiley & Sons, Inc., New York.
26. Cima, M. J., A. Lauder, S. Khanuja and E. Sachs, 1992, "Microstructural Elements of Components Derived from 3D Printing, " Solid Freeform Fabrication Symposium, Austin, TX., pp. 220-227.
27. Morse, T., 1979, Handbook of Organic Additives for Use in Ceramic Body Formulation, Montana Energy and MHD Research and Development Institute, Butte, MT.
28. Sachs, E., M. J. Cima, J. Cornie, D. Brancazio, J. Bredt, A. Curodeau, T. Fan, S. Khanuja, A. Lauder, J. Lee and S. Michaels, 1993, "Three- Dimensional Printing: The Physics and Implications of Additive Manufacturing, " CIRP Annals, Vol. 42, No. 1, pp. 257-260.
29. Wohlers, T., 2006, Wohlers Report 2006: Rapid Prototyping, Tooling & Manufacturing State of the Industry Annual Worldwide Progress Report, Wohlers Associates, Inc., Fort Collins, Colorado.
30. Crane, N. B., J. Wilkes, E. Sachs and S. M. Allen, 2006, "Improving Accuracy of Powder-Based SFF Processes by Metal Deposition from a Nanoparticle Dispersion, " Rapid Prototyping Journal, Vol. 12, No. 5, pp. 266-274.