-
2
-
-
84885273077
-
-
- Jeff Jeffrey, IRMCO and Brett Krause, Böhler-Uddeholm Corp. Meeting New Friction and Tooling Demands from Advanced High Strength Steel, Fabtech Technical Sessions, November 1, 2006, Atlanta, GA
-
- Jeff Jeffrey, IRMCO and Brett Krause, Böhler-Uddeholm Corp. "Meeting New Friction and Tooling Demands from Advanced High Strength Steel", Fabtech Technical Sessions, November 1, 2006, Atlanta, GA
-
-
-
-
3
-
-
84885276307
-
-
Access Date: 08/20/2007
-
U.S Steel Web Site http://www.ussautomotive.com/auto/tech/grades/ trip_main.htm (Access Date: 08/20/2007)
-
U.S Steel Web Site
-
-
-
5
-
-
0033489903
-
-
- Peter J. Blau, Kenneth G. Budinski. Development and use of ASTM standards for wear testing. Wear, 1999, 225-229: 1159-1170
-
- Peter J. Blau, Kenneth G. Budinski. Development and use of ASTM standards for wear testing. Wear, 1999, Volume (225-229): 1159-1170
-
-
-
-
6
-
-
0030168548
-
Laboratories at Work: Tribology at the University of Waterloo
-
June
-
- John G. Lenard, John B. Medley, and John A. Schey, "Laboratories at Work: Tribology at the University of Waterloo" Tribotest Journal, June 1996, (2) :383-394
-
(1996)
Tribotest Journal
, vol.2
, pp. 383-394
-
-
Ernest Rabinowicz1
Lenard, J.G.2
Medley, J.B.3
Schey, J.A.4
-
7
-
-
31144455139
-
-
- M.T. Costello and I.I. Riff, Study of hydroforming lubricants with overbased sulfonates and friction modifiers Tribology Letters, December 2005, 20(3-4):201-208
-
- M.T. Costello and I.I. Riff, "Study of hydroforming lubricants with overbased sulfonates and friction modifiers" Tribology Letters, December 2005, Vol. 20(3-4):201-208
-
-
-
-
8
-
-
84885285718
-
-
- Gregory Dalton, Enhancing Stamping Performance of High Strength Steels with Tribology, Report on Phase 1 Testing (Prepared for the Auto/Steel Partnership Tribology Team), TribSys Inc., December 31, 2002
-
- Gregory Dalton, "Enhancing Stamping Performance of High Strength Steels with Tribology", Report on Phase 1 Testing (Prepared for the Auto/Steel Partnership Tribology Team), TribSys Inc., December 31, 2002
-
-
-
-
9
-
-
19844363031
-
Mechanical study of a sheet metal forming dies wear
-
Karlstad University, 10-13 September
-
- D. Attaf, L. Penazzi, C. Boher, C. Levaillant, Mechanical study of a sheet metal forming dies wear, in: Proceedings of the Sixth International Tooling Conference, Karlstad University, 10-13 September 2002.
-
(2002)
Proceedings of the Sixth International Tooling Conference
-
-
Attaf, D.1
Penazzi, L.2
Boher, C.3
Levaillant, C.4
-
10
-
-
19844368180
-
Wear behaviour on the radius portion of a die in deep-drawing: Identification, localisation and evolution of the surface damage
-
- C. Boher, D. Attaf, L. Penazzi, C. Levaillant, "Wear behaviour on the radius portion of a die in deep-drawing: Identification, localisation and evolution of the surface damage", Wear, 2005, (259): 1097-1108
-
(2005)
Wear
, vol.259
, pp. 1097-1108
-
-
Boher, C.1
Attaf, D.2
Penazzi, L.3
Levaillant, C.4
-
11
-
-
0032210330
-
Anti-galling evaluation in aluminum sheet forming
-
- Teisuke Sato, Tatsuo Besshi, "Anti-galling evaluation in aluminum sheet forming" Journal of Materials Processing Technology, 1998, (83):185-191
-
(1998)
Journal of Materials Processing Technology
, vol.83
, pp. 185-191
-
-
Boher, C.1
Attaf, D.2
Penazzi, L.3
Levaillant, C.4
Sato, T.5
Besshi, T.6
-
12
-
-
0028726781
-
Galling mechanisms in sheet forming operations
-
- Erik Schedin, "Galling mechanisms in sheet forming operations", Wear, 1994, (179): 123-128
-
(1994)
Wear
, vol.179
, pp. 123-128
-
-
Boher, C.1
Attaf, D.2
Penazzi, L.3
Levaillant, C.4
Sato, T.5
Besshi, T.6
Schedin, E.7
-
13
-
-
0037047956
-
Zincalloys as tool materials in short-run sheet-metal forming processes- Experimental analysis of three different zinc-alloys
-
- Anders Nilsson, Per Gabrielson, Jan-Eric Ståhl, "Zincalloys as tool materials in short-run sheet-metal forming processes- Experimental analysis of three different zinc-alloys", Journal of Materials Processing Technology, 2002, (125-126): 806-813
-
(2002)
Journal of Materials Processing Technology
, vol.125-126
, pp. 806-813
-
-
Boher, C.1
Attaf, D.2
Penazzi, L.3
Levaillant, C.4
Sato, T.5
Besshi, T.6
Schedin, E.7
Nilsson, A.8
Gabrielson, P.9
Ståhl, J.10
-
14
-
-
0031171707
-
Comparative study of shotblasted and electrical-discharge-textured rolls
-
- M. Jonasson, T. Pulkinen, L. Gunnarsson, E. Schedin, "Comparative study of shotblasted and electrical-discharge-textured rolls" Wear, 1997, (207):34-40
-
(1997)
Wear
, vol.207
, pp. 34-40
-
-
Jonasson, M.1
Pulkinen, T.2
Gunnarsson, L.3
Schedin, E.4
-
15
-
-
0035934411
-
Analysis of local loads on the draw die profile with regard to wear using the FEM and experimental investigations
-
- D. Hortig, D. Schmoeckel, "Analysis of local loads on the draw die profile with regard to wear using the FEM and experimental investigations" , Journal of Materials Processing Technology, 2001, (115):153-158
-
(2001)
Journal of Materials Processing Technology
, vol.115
, pp. 153-158
-
-
Hortig, D.1
Schmoeckel, D.2
-
16
-
-
0033332225
-
Characterization of a measurement system for reproducible friction testing on sheet metal under plane strain
-
- L.R. Sanchez, "Characterization of a measurement system for reproducible friction testing on sheet metal under plane strain", Tribology International, 1999, (32):575-586.
-
(1999)
Tribology International
, vol.32
, pp. 575-586
-
-
Sanchez, L.R.1
-
17
-
-
84885261727
-
-
- Gregory Dalton, Enhancing Stamping Performance of High Strength Steels with Tribology, Report on Phase 3 Testing (Prepared for the Auto/Steel Partnership Tribology Team), TribSys Inc., May 11, 2004
-
- Gregory Dalton, "Enhancing Stamping Performance of High Strength Steels with Tribology", Report on Phase 3 Testing (Prepared for the Auto/Steel Partnership Tribology Team), TribSys Inc., May 11, 2004
-
-
-
-
18
-
-
0031171308
-
The influence of die geometry on tool wear in deep drawing
-
- M. Eriksen, "The influence of die geometry on tool wear in deep drawing", Wear, 1997, (207):123-128
-
(1997)
Wear
, vol.207
, pp. 123-128
-
-
Eriksen, M.1
-
19
-
-
0003977783
-
Friction in Sheet Metal Forming the influence of (local) contact conditions and deformations
-
Ph.D. Thesis, University Twente, Nederland
-
- Rudi ter Haar, "Friction in Sheet Metal Forming the influence of (local) contact conditions and deformations", Ph.D. Thesis, University Twente, 1996, Nederland.
-
(1996)
-
-
Eriksen, M.1
ter Haar, R.2
-
20
-
-
0035482292
-
The effect of lubricant selection on galling in a model wear test
-
- E. van der Heide, A.J. Huis in't Veld, D.J. Schipper, "The effect of lubricant selection on galling in a model wear test", Wear, 2001,(251):973-979
-
(2001)
Wear
, vol.251
, pp. 973-979
-
-
van der Heide, E.1
Huis in't Veld, A.J.2
Schipper, D.J.3
-
21
-
-
33745271326
-
Wear of aluminum bronze in sliding contact with lubricated stainless steel sheet material
-
- E. van der Heide, E.D. Stam, H. Giraud, G. Lovato, N. Akdut, F. Clarysse, P. Caenen, I. Heikillä," Wear of aluminum bronze in sliding contact with lubricated stainless steel sheet material, Wear, 2006, (261):68-73
-
(2006)
Wear
, vol.261
, pp. 68-73
-
-
van der Heide, E.1
Stam, E.D.2
Giraud, H.3
Lovato, G.4
Akdut, N.5
Clarysse, F.6
Caenen, P.7
Heikillä, I.8
|