Extrusions and intrusions in fatigued metals. Part 1. State of the art and history

Philosophical Magazine

Volumn 89, Issue 16, 2009, Pages 1295-1336

  Man, J ^a   Obrtlik K ^a   Polak J ^a  

^a INSTITUTE OF PHYSICS OF MATERIALS   (Czech Republic)

Author keywords

Extrusion; Fatigue crack initiation; Intrusion; Persistent slip band; Persistent slip marking

Indexed keywords

COMPUTATIONAL SIMULATION; DEFORMED METALS; EXPERIMENTAL CHARACTERISTICS; EXTRUSION AND INTRUSION; FATIGUE CRACK INITIATION; MICROSCOPIC TECHNIQUES; PERSISTENT SLIP BAND; PERSISTENT SLIP BANDS; PERSISTENT SLIP MARKINGS; STATE OF THE ART; SURFACE RELIEFS; THEORETICAL MODELS; THEORETICAL STUDY;

CRACK DETECTION; CRACK INITIATION; FATIGUE CRACK PROPAGATION; FATIGUE OF MATERIALS; POLYCRYSTALLINE MATERIALS; SECURITY OF DATA; SIMULATORS; STRESS CORROSION CRACKING;

METAL EXTRUSION;

EID: 70449638259     PISSN: 14786435     EISSN: 14786443     Source Type: Journal    
DOI: 10.1080/14786430902917616     Document Type: Article

References (158)

1. J.A. Ewing and J.C.W. Humfrey, Phil. Trans. R. Soc. (Lond.) A 200 (1903) p.241.
2. P.J.E. Forsyth, Nature 171 (1953) p.172.
3. D. Hull, J. Inst. Metals 84 (1955-1956) p.527.
4. A.H. Cottrell and D. Hull, Proc. R. Soc. A 242 (1957) p.211.
5. P.J.E. Forsyth, Proc. R. Soc. A 242 (1957) p.198.
6. N. Thompson, N.J. Wadsworth and N. Louat, Phil. Mag. 1 (1956) p.113.
7. E.E. Laufer and W.N. Roberts, Phil. Mag. 10 (1964) p.883.
8. E.E. Laufer and W.N. Roberts, Phil. Mag. 14 (1966) p.65.
9. P. Luká s?, M. Klesnil and J. Krejc? í, Phys. Status Solidi 27 (1968) p.545.
10. J.D. Atkinson, L.M. Brown, R. Kwadjo, W.M. Stobbs, A.T. Winter and P.J. Woods, The structure of persistent slip bands and the fatigue strength of metals, in The Microstructure and Design of Alloys, Proceedings of the Third International Conference on the Strength of Metals and Alloys (ICSMA 3), Vol.1, Cambridge, UK, 1973, paper. No. 82, p.402.
11. C. Laird, P. Charsley and H. Mughrabi, Mater. Sci. Eng. 81 (1986) p.433.
12. J. Polá k, Cyclic deformation, crack initiation, and low-cycle fatigue, in Comprehensive Structural Integrity, Vol.4, I. Milne, R.O. Ritchie and B. Karihallo eds., Elsevier, Amsterdam, 2003, p.1.
13. P. Lukás and L. Kunz, Phil. Mag. 84 (2004) p.317.
14. C. Laird, Fatigue, in Physical Metallurgy, 4th ed., Vol.3, R.W. Cahn and P. Haasen eds., Elsevier Science, Amsterdam, 1996, p.2293.
15. S. Suresh, Fatigue of Materials, 2nd ed., Cambridge University Press, Cambridge, 1998.
16. P. Lukás, Fatigue crack initiation mechanisms, in Encyclopedia of Materials: Science and Technology, Vol.3, K.H.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer and S. Mahajan eds., Elsevier Science, Oxford, 2001, p.2884.
17. H. Mughrabi, Cyclic strain localization in fatigued metals, in Physical Aspects of Fracture, Vol.II/32, E. Bouchaud, D. Jeulin, C. Prioul and S. Roux eds., Kluwer Academic, Dordrecht, 2001, p.271.
18. U. Essmann, U. Gösele and H. Mughrabi, Phil. Mag. A 44 (1981) p.405.
19. J.G. Antonopoulos, L.M. Brown and A.T. Winter, Phil. Mag. 34 (1976) p.549.
20. J. Man, P. Klapetek, O. Man, A. Weidner, K. Obrtl?́k and J. Polá k, Phil. Mag. 89 ( 2009) p.1337.
21. D.L. Davidson, Techniques for investigating fatigue, in Proceedings of the Sixth International Fatigue Congress (FATIGUE '96), Vol.III, G. Lütjering and H. Nowack, eds., Pergamon Press, Oxford, 1996, p.1925.
22. P.J.E. Forsyth, J. Inst. Metals 82 (1953-1954) p.449.
23. P. Neumann, Z. Metallk. 58 (1967) p.780.
24. J.M. Finney and C. Laird, Phil. Mag. 31 (1975) p.339.
25. S.L. Ogin and L.M. Brown, A preliminary study of persistent slip bands in AgCl, in Dislocation Modelling of Physical Systems, M.F. Ashby, R. Bullough, C.S. Hartley and J.P. Hirth eds., Pergamon Press, Oxford, 1981, p.579.
26. W.A. Wood, Phil. Mag. 3 (1958) p.692.
27. D.H. Avery, G.A. Miller and W.A. Backofen, Acta Metall. 9 (1961) p.892.
28. W.D. Dover and W.J.D. Jones, Br. J. Appl. Phys. 18 (1967) p.1257.
29. A. Ueno and H. Kishimoto, Development of in situ observation fatigue testing systems and their application, in Fatigue' 99, Proceedings of the Seventh International Fatigue Congress, Vol.4/4, X.R. Wu and Z.G. Wang, eds., Higher Education Press/EMAS, Beijing/West Midlands, UK, 1999, p.2795.
30. M. Hempel, Metallographic observations on the fatigue of steels, in Proceedings of the International Conference on Fatigue of Metals, The Institution of Mechanical Engineers, London, 1956, p.543.
31. D. Hull, J. Inst. Metals 86 (1957-1958) p.425.
32. K. Katagiri, A. Omura, K. Koyanagi, J. Awatani, T. Shiraishi and H. Kaneshiro, Metall. Trans. A 8 (1977) p.1769.
33. I.G. Greenfield, Acta Metall. 19 (1971) p.857.
34. A.W. Thompson, Acta Metall. 20 (1972) p.1085.
35. A.T. Winter, Phil. Mag. 30 (1974) p.719.
36. W. Kromp, B. Weiss and R. Stickler, Metall. Trans. 4 (1973) p.1167.
37. R. Wang, B. Bauer and H. Mughrabi, Z. Metallk. 73 (1982) p.30.
38. H. Mughrabi, R. Wang, K. Differt and U. Essmann, Fatigue crack initiation by cyclic slip irreversibilities in high-cycle fatigue, in Fatigue Mechanisms: Advances in Quantitative Measurement of Physical Damage, ASTM STP 811, J. Lankford, D.L. Davidson, W.L. Morris and R.P. Wei eds., American Society for Testing and Materials, Philadelphia, 1983, p.5.
39. J. Polá k, T. Lepistöand P. Kettunen, Mater. Sci. Eng. 74 (1985) p.85.
40. Z.S. Basinski and S.J. Basinski, Acta Metall. 33 (1985) p.1307.
41. P. Neumann, Fatigue, in Physical Metallurgy, 3rd ed., Part 2, R.W. Cahn and P. Haasen eds., Elsevier Science, Amsterdam, 1983, p.1553.
42. A. Hunsche and P. Neumann, Acta Metall. 34 (1986) p.207.
43. Z.S. Basinski and S.J. Basinski, Scripta Metall. 18 (1984) p.851.
44. Z.S. Basinski and S.J. Basinski, Acta Metall. 37 (1989) p.3263.
45. Z.S. Basinski and S.J. Basinski, Acta Metall. 33 (1985) p.1319.
46. J. Polák and T. Kruml, Topography of the crack nuclei at the emerging persistent slip band in austenitic 316L steel, in Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, K.-T. Rie and P.D. Portella eds., Elsevier Science, Oxford, 1998, p.559.
47. J. Ahmed, A.J. Wilkinson and S.G. Roberts, Phil. Mag. A 81 (2001) p.1473.
48. O. Kraft, P. Wellner, M. Hommel, R. Schwaiger and E. Arzt, Z. Metallk. 93 (2002) p.392.
49. Y. Motoyashiki, A. Brückner-Foit and A. Sugeta, Fatigue Fract. Eng. Mater. Struct. 29 (2007) p.556.
50. J. Polák, J. Man, T. Vystavel and L. Zouhar, Key Eng. Mater. 345/346 (2007) p.379.
51. K. Gall, G. Biallas, HJ. Maier, P. Gullett, M.F. Horstemeyer and D. McDowell, Metall. Mater. Trans. A 35 (2004) p.321.
52. G. Biallas and H.J. Maier, Int. J. Fatigue 29 (2007) p.1413.
53. A. Weidner, R. Beyer, C. Blochwitz, C. Holste, A. Schwab and W. Tirschler, Mater. Sci. Eng. A 435/436 (2006) p.540.
54. A. Weidner, C. Blochwitz, W. Skrotzki and W. Tirschler, Mater. Sci. Eng. A 479 (2008) p.181.
55. W.J. Baxter, What are the kinetics of slipband extrusion?, in Basic Questions in Fatigue: Volume I, ASTM STP 924, J.T. Fong and R.J. Fields eds., American Society for Testing and Materials, Philadelphia, 1988, p.67.
56. W.J. Baxter and T.R. McKinney, Metall. Trans. A 19 (1988) p.83.
57. T.-G. Zhai, S. Lin and J.-M. Xiao, Acta Metal. Mater. 38 (1990) p.1687.
58. T. Zhai, J.W. Martin and G.A.D. Briggs, Acta Metal. Mater. 43 (1995) p.3813.
59. T. Zhai, G.A.D. Briggs and J.W. Martin, Phil. Mag. A77 (1998) p.957.
60. G. Venkataraman, T.S. Sriram, M.E. Fine and Y.W. Chung, Scripta Metall. Mater. 24 (1990) p.273.
61. T.S. Sriram, M.E. Fine and Y.W. Chung, Scripta Metall. Mater. 24 (1990) p.279.
62. J.C. Grosskreutz, C.Q. Bowles and A.A. Wahab, J. Mater. Sci. 27 (1992) p.5756.
63. H. Ishii, S. Miyazu, K. Nagura and K. Tohgo, Trans. Jpn. Soc. Mech. Eng. A 59 (1993) p.3014.
64. S.E. Harvey, P.G. Marsh and W.W. Gerberich, Acta Metall. Mater. 42 (1994) p.3493.
65. Y. Nakai, S. Fukuhara and K. Ohnishi, Int. J. Fatigue 19 (1997) p.S223.
66. J. Man, K. Obrtl?́k, F. Lopour, C. Blochwitz and J. Polá k, AFM quantitative evaluation of surface relief topography in fatigued 316L stainless steel, in Fatigue'99, Proceedings of the Seventh International Fatigue Congress, Vol.1/4, X.R. Wu and Z.G. Wang, eds., Higher Education Press/EMAS, Beijing/West Midlands, UK, 1999, p.157.
67. L. Sabatier, P. Villechaise and J.C. Girard, J. Phys. IV France 10 (2000) p.Pr6-197.
68. Y. Nakai, K. Ohnishi and T. Kusukawa, Observations of fatigue slip-bands and stage I crack-initiation process in --brass using scanning atomic-force microscopy, in Small Fatigue Cracks: Mechanics, Mechanisms and Applications, K.S. Ravichandran, R.O. Ritchie and Y. Murakami eds., Elsevier Science, Oxford, 1999, p.343.
69. J. Polá k, J. Man and K. Obrtl?́k, Int. J. Fatigue 25 (2003) p.1027.
70. J. Polá k, J. Man, K. Obrtl?́k and T. Kruml, Z. Metallk. 94 (2003) p.1327.
71. D.E. Witmer, G.C. Farrington and C. Laird, Acta Metall. 35 (1987) p.1895.
72. J. Dönch and P. Haasen, Z. Metallk. 62 (1971) p.780.
73. Z.S. Basinski and S.J. Basinski, Prog. Mater. Sci. 36 (1992) p.89.
74. J. Man, M. Petrenec, K. Obrtl?́k and J. Polá k, Acta Mater. 52 (2004) p.5551.
75. A. Hunsche and P. Neumann, Crack nucleation in persistent slip bands, in Basic Questions in Fatigue: Volume I, ASTM STP 924, J.T. Fong and R.J. Fields eds., American Society for Testing and Materials, Philadelphia, 1988, p.26.
76. P. Neumann and A. Tönnessen, Cyclic deformation and crack initiation, in Fatigue '87, Proceedings of the Third International Conference on Fatigue and Fatigue Thresholds, Vol.1, R.O. Ritchie and E.A. Starke, Jr., eds., EMAS, West Midlands, UK, 1987, p.3.
77. P. Neumann, Analytical solution for the incompatibility stresses at twin boundaries in cubic crystals, in Fatigue '99, Proceedings of the Seventh International Fatigue Congress, Vol.1/4, X.R. Wu and Z.G. Wang, eds., Higher Education Press/EMAS, Beijing/West Midlands, UK, 1999, p.107.
78. H. Mughrabi, M. Bayerlein and R. Wang, Direct measurement of the rate of extrusion growth in fatigued copper mono- and polycrystals, in Proceedings of the Ninth International Conference on Strength of Metals and Alloys (ICSMA 9), Vol.2, D.G. Brandon, R. Chaim, and A. Rosen, eds., Freund Publishing, London, 1991, p.879.
79. P. Villechaise, L. Sabatier and J.C. Girard, Mater. Sci. Eng. A 323 (2002) p.377.
80. J. Man, K. Obrtl?́k, C. Blochwitz and J. Polá k, Acta Mater. 50 (2002) p.3767.
81. H. Mughrabi, Dislocations in fatigue, in Dislocations and Properties of Real Materials, Book No. 323, The Institute of Metals, London, 1985, p.244.
82. J. Man, K. Obrtl?́k and J. Polá k, Mater. Sci. Eng. A 351 (2003) p.123.
83. I.B. Kwon, M.E. Fine and J. Weertman, Acta Metall. 37 (1989) p.2927.
84. J. Polák and P. Lis?kut?́n, Fatigue Fract. Eng. Mater. Struct. 13 (1990) p.119.
85. M. Bayerlein and H. Mughrabi, Acta Metall. Mater. 39 (1991) p.1645.
86. G.-H. Kim, I.-B. Kwon and M.E. Fine, Mater. Sci. Eng. A 142 (1991) p.177.
87. B.-T. Ma and C. Laird, Acta Metall. 37 (1989) p.325.
88. R. Wang, H. Mughrabi, S. McGovern and M. Rapp, Mater. Sci. Eng. 65 (1984) p.219.
89. K. Obrtl?́k, J. Man and J. Polá k, Mater. Sci. Eng. A 234/236 (1997) p.727.
90. J. Man, K. Obrtl?́k and J. Polá k, Metallic Mater. 38 (2000) p.339.
91. K. Mecke and C. Blochwitz, Phys. Status Solidi (a) 61 (1980) p.K5.
92. I.B. Kwon, M.E. Fine and J. Weertman, Acta Metall. 37 (1989) p.2937.
93. P.G. Partridge, Acta Metall. 13 (1965) p.517.
94. N. Thompson and N.J. Wadsworth, Adv. Phys. 7 (1958) p.72.
95. A.J. Kennedy, Processes of Creep and Fatigue in Metals, Oliver & Boyd, Edinburgh and London, 1962, p.331.
96. J.R. Low Jr., Prog. Mater. Sci. 12 (1963) p.3.
97. C. Laird and D.J. Duquette, Mechanisms of fatigue crack nucleation, in Corrosion Fatigue: Chemistry, Mechanics and Microstructure, Vol.NACE-2, O.F. Devereux, A.J. McEvily and R.W. Staehle eds., National Association of Corrosion Engineers, Houston, 1972, p.88.
98. S. Kocanda, Fatigue Failure of Metals, Sijthoff and Nordhoff, Warsaw, 1978, p.67.
99. T.H. Lin and S.R. Lin, Micromechanics theory of fatigue crack initiation applied to timedependent fatigue, in Fatigue Mechanisms, ASTM STP 675, J.T. Fong ed., American Society for Testing and Materials, Philadelphia, 1979, p.707.
100. L.M. Brown, Metal Sci. 11 (1977) p.315.
101. L.M. Brown, Dislocations and the fatigue strength of metals, in Dislocation Modelling of Physical Systems, M.F. Ashby, R. Bullough, C.S. Hartley and J.P. Hirth eds., Pergamon Press, Oxford, 1981, p.51.
102. L.M. Brown and S.L. Ogin, Role of internal stresses in the nucleation of fatigue cracks, in Fundamentals of Deformation and Fracture, B.A. Bilby, K.J. Miller and J.R. Willis eds., Cambridge University Press, Cambridge, 1985, p.501.
103. L.M. Brown, Deformation mechanisms leading to the initiation and slow growth of fatigue cracks, in Modelling of Material Behavior and Design, J.D. Embury and A.W. Thompson eds., TMS-AIME, Warrendale, PA, 1990, p.175.
104. L.M. Brown and F.R.N. Nabarro, Phil. Mag. 84 (2004) p.441.
105. C. Buque, W. Tirschler and C. Holste, Mater. Sci. Eng. A 215 (1996) p.168.
106. L.M. Brown, private communication (2004).
107. L. Cretegny and A. Saxena, Acta Mater. 49 (2001) p.3755.
108. K. Differt, U. Essmann and H. Mughrabi, Phil. Mag. A 54 (1986) p.237.
109. J. Polá k, Mater. Sci. Eng. 92 (1987) p.71.
110. J. Polá k, Mater. Sci. Eng. A 468/470 (2007) p.33.
111. J. Polák and M. Sauzay, Mater. Sci. Eng. A 500 (2009) p.122.
112. J. Polá k, Solid State Phenom. 35/36, Dislocations 93 (1994) p.405.
113. J. Polá k, Mater. Sci. Eng. 89 (1987) p.35.
114. L.M. Hsiung and N.S. Stoloff, Acta Metall. Mater. 38 (1990) p.1191.
115. T.H. Lin and Y.M. Ito, Proc. Natl. Acad. Sci. U.S.A. 62 (1969) p.631.
116. T.H. Lin, S.R. Lin and X.Q. Wu, Phil. Mag. A 59 (1989) p.1263.
117. T.H. Lin, Adv. Appl. Mech. 29 (1992) p.1.
118. T.H. Lin, N.G. Liang, K.F.F. Wong and N.J. Teng, Phil. Mag. A 80 (2000) p.1829.
119. W.A. Wood and A.M. Bendler, Trans. Metall. Soc. AIME 224 (1962) p.180.
120. Z.S. Basinski, R. Pascual and S.J. Basinski, Acta Metall. 31 (1983) p.591.
121. P. Ackermann, L.P. Kubin, J. Lepinoux and H. Mughrabi, Acta Metall. 32 (1984) p.715.
122. R. Wang and H. Mughrabi, Mater. Sci. Eng. 63 (1984) p.147.
123. J. Polák and K. Obrtl?́k, Surface relief and dislocation structure in fatigued copper single crystals, in Proceedings of the 8th International Conference on the Strength of Metals and Alloys (ICSMA 8), Vol.1/2, P.O. Kettunen, T.K. Lepistöand M.E. Lehtonen, eds., Pergamon Press, Oxford, 1988, p.761.
124. T. Zhai, J.W. Martin and G.A.D. Briggs, Acta Mater. 44 (1996) p.3489.
125. K. Tanaka and T. Mura, J. Appl. Mech. 48 (1981) p.97.
126. G. Venkataraman, Y.W. Chung, Y. Nakasone and T. Mura, Acta Metall. Mater. 38 (1990) p.31.
127. G. Venkataraman, Y.W. Chung and T. Mura, Acta Metall. Mater. 39 (1991) p.2621.
128. K.S. Chan, Metall Mater. Trans. A 34 (2003) p.43.
129. G. Venkataraman, Y.W. Chung and T. Mura, Acta Metall. Mater. 39 (1991) p.2631
130. Z.S. Basinski and S.J. Basinski, Scripta Metall. Mater. 26 (1992) p.1505.
131. J.I. Dickson, J.-P. Ba?̈lon, J. Xia and M. Bureau, Extrusion-intrusion formation in Cu and 70Cu-30Zn, in Proceedings of the Fifth International Conference on Fatigue and Fatigue Thresholds (FATIGUE '93), Vol.III, J.-P. Ba?̈lon and J.I. Dickson, eds., EMAS, West Midlands, UK, 1993, p.1883.
132. P. Neumann, H. Fuhlrott and H. Vehoff, Experiments concerning brittle, ductile, and environmentally controlled fatigue crack growth, in Fatigue Mechanisms, ASTM STP 675, J.T. Fong ed., American Society for Testing and Materials, Philadelphia, 1979, p.371.
133. U. Essmann, Phil. Mag. A 45 (1982) p.171.
134. S.N. Rosenbloom and C. Laird, Acta Metall. Mater. 41 (1993) p.3473.
135. A.N. May, Nature 185 (1960) p.303.
136. A.N. May, Nature 185 (1960) p.573.
137. B.-T. Ma and C. Laird, Acta Metall. 37 (1989) p.337.
138. E.A. Repetto and M. Ortiz, Acta Mater. 45 (1997) p.2577.
139. A.C. Damask and G.J. Dienes, Point Defects in Metals, Gordon and Breach, New York, 1963.
140. S. Brinckmann and E. Van der Giessen, Stress concentration at the surface of fatigued materials: a discrete dislocation dynamics study, in Advances in Computational and Experimental Engineering and Sciences (ICCES03), S.N. Atluri, D.E. Beskos and D. Polyzos eds., Elsevier, Amsterdam, 2003.
141. S. Brinckmann and E. Van der Giessen, Mater. Sci. Eng. A 387/389 (2004) p.461.
142. C. Déprés, C.F. Robertson and M.C. Fivel, Phil. Mag. 84 (2004) p.2257.
143. C. Déprés, C.F. Robertson and M.C. Fivel, Mater. Sci. Eng. A 387/389 (2004) p.288.
144. C. Déprés, C.F. Robertson and M.C. Fivel, Phil. Mag. 86 (2006) p.79.
145. M.V. Glazov and C. Laird, Acta Metall. Mater. 43 (1993) p.2849.
146. C. Holste, Phil. Mag. 84 (2004) p.299.
147. G. Dörr and C. Blochwitz, Cryst. Res. Tech. 22 (1987) p.113.
148. W. Liu, M. Bayerlein, H. Mughrabi, A. Day and P.N. Quested, Acta Metall. Mater. 40 (1992) p.1763.
149. B.-T. Ma and C. Laird, Acta Metall. Mater. 38 (1990) p.1693.
150. J. Polá k, K. Obrtl?́k and P. Lis?kut?́n, Mechanisms of fatigue crack initiation, in Basic Mechanisms in Fatigue of Metals, P. Luká s? and J. Polák eds., Academia/Elsevier, Prague/Amsterdam, 1988, p.101.
151. D.L. Anton and M.E. Fine, Mater. Sci. Eng. 58 (1983) p.135.
152. Y.H. Kim and M.E. Fine, Metall. Trans. A 13 (1982) p.59.
153. W.J. Lee, Y.W. Chung and M.E. Fine, Metall. Trans. A 19 (1988) p.337.
154. N.J. Roven and E. Nes, Acta Metall. Mater. 39 (1991) p.1719.
155. L.C. Rolim Lopes and J. Charlier, Mater. Sci. Eng. A 169 (1993) p.67.
156. T. Zhai, J.W. Martin, G.A.D. Briggs and A.J. Wilkinson, Acta Metal. Mater. 44 (1996) p.3477.
157. M. Sauzay and P. Gilormini, Theor. Appl. Fract. Mech. 38 (2002) p.53.
158. J.T. Fong, Direct observations - the essential ingredients for discovering fundamental mechanisms of fatigue, in Fatigue Mechanisms, ASTM STP 675, J.T. Fong ed., American Society for Testing and Materials, Philadelphia, 1979, p.287.3