Problems and issues in laser-arc hybrid welding

International Materials Reviews

Volumn 54, Issue 4, 2009, Pages 223-244

  Ribic, B ^a   Palmer, T A ^a   DebRoy, T ^a  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

Arc welding; Fluid flow; Heat transfer; Hybrid welding; Laser welding; Microstructure; Review

Indexed keywords

ELECTRIC ARC WELDING; HEAT TRANSFER; LASER BEAM WELDING;

ARC-WELDING; BRITTLE PHASE; ELECTRICAL ARC; FLUID-FLOW; HEAT SOURCES; HIGH INTENSITY; HYBRID WELDING; LASER-ARC HYBRID WELDING; PHASE FORMATIONS; WELDING PROCESS;

FLOW OF FLUIDS;

EID: 70449596095     PISSN: 09506608     EISSN: 17432804     Source Type: Journal    
DOI: 10.1179/174328009X411163     Document Type: Review

References (160)

1. W. M. Steen: J. Appl. Phys., 1980, 51, 5636-5641.
2. G. Campana, A. Fortunato, A. Ascari, G. Tani and L. Tomesani: J. Mater. Process. Technol., 2007, 191, 111-113.
3. G. Casalino: J. Mater. Process. Technol., 2007, 191, 106-110.
4. B. Hu and I. M. Richardson: Mater. Sci. Eng. A, 2007, A459, 94-100.
5. R. S. Huang, L. M. Liu and G. Song: Mater. Sci. Eng. A, 2007, A447, 239-243.
6. L. M. Liu, J. F. Wang and G. Song: Mater. Sci. Eng. A, 2004, A381, 129-133.
7. C. Walz, T. Seefeld and G. Sepold: 'Process stability and design of seam geometry during hybrid welding', Proc. Conf. ICALEO 2001, Jacksonville, FL, USA, October 2001, Laser Institute of America, Paper 305.
8. T. Jokinen, P. Jernstrom, M. Karhu, I. Vanttaja and V. Kujanpaa: 'Optimization of parameters in hybrid welding of aluminum alloy', Proc. 1st Int. Symp. on 'High-power laser !microprocessing', Osaka, Japan, May 2002, Osaka University, 307-312.
9. M. Gao, X. Zeng and Q. W. Hu: J. Mater. Process. Technol., 2007, 184, 177-183.
10. U. Jasnau, J. Hoffmann and P. Seyffarth: Robot. Weld. Intell. Autom., 2004, 299, 14-24.
11. A. Mahrle and E. Beyer: J. Laser Appl., 2006, 18, 169-180.
12. E. A. Metzbower, P. E. Denney, D. W. Moon, C. R. Feng and S. G. Lambrakos: Mater. Sci. Forum, 426-432, Pt 5, 4147-4152.
13. G. Song, L. M. Liu and P. C. Wang: Mater. Sci. Eng. A, 2006, A429, 312-319.
14. G. Tani, G. Campana, A. Fortunato and A. Ascari: Appl. Surf. Sci., 2007, 253, 8050-8053.
15. R. S. Huang, L. M. Liu and F. Zhang: Chin. Opt. Lett., 2008, 6, 47-50.
16. T. Jokinen, T. Viherva, H. Riikonen and V. Kujanpaa: J. Laser Appl.,2000, 12, 185-188.
17. C. H. Kim, W. Zhang and T. DebRoy: J. Appl. Phys., 2003, 94, 2667-2679.
18. L. M. Liu, R. Huang, G. Song and X. Hao: IEEE Trans. Plasma Sci., 2008, 36, 1937-1943.
19. B. Ribic, R. Rai and T. DebRoy: Sci. Technol. Weld. Join., 2008, 13, 683-693.
20. M. Gao, X. Zeng, Q. W. Hu and J. Yan: Sci. Technol. Weld. Join., 2008, 13, 106-113.
21. M. Gao, X. Y. Zeng, J. Yan and Q. W. Hu: Appl. Surf. Sci., 2008, 254, 5715-5721.
22. P. L. Moore, D. S. Howse and E. R. Wallach: Sci. Technol. Weld. Join., 2004, 9, 314-322.
23. A. Nonn, W. Dahl and W. Bleck: Eng. Fract. Mech., 2008, 75, 3251-3263.
24. H. Pinto, A. Pyzalla, H. Hackl and J. Bruckner: Residual Stresses VII, 2006, 524-525, 627-632.
25. J. X. Zhang, Y. Xue and S. L. Gong: Sci. Technol. Weld. Join., 2005, 10, 643-646.
26. L. Liu, G. Song and J. F. Wang: Mater. Sci. Forum, 2005, 488-489, 361-364.
27. L. M. Liu, G. Song, G. Liang and J. F. Wang: Mater. Sci. Eng. A, 2005, A390, 76-80.
28. S. Katayama, S. Uchiumi, M Mizutani, J. Wang and K. Fujii: Weld. Int., 2007, 21, 25-31.
29. A. Fellman and V. Kujanpaa: J. Laser Appl., 2006, 18, 12-20.
30. T. Kim, Y. Suga and T. Koike: JSME Int. J. Ser. A, 2003, 46A, 202-207.
31. Y. P. Kim, N. Alam and H. S. Bang: Sci. Technol. Weld. Join., 2006, 11, 295-307.
32. K. Murakami, Y. Mitooka, M. Hino, H. Iogawa, H. Ono and S. Katayama: J. Jpn Inst. Met., 2006, 70, 134-137.
33. G. L. Qin, Z. Lei and S. Y. Lin: Sci. Technol. Weld. Join., 2007, 12, 79-86.
34. P. T. Swanson, C. J. Page, E. Read and H. Z. Wu: Sci. Technol. Weld. Join., 2007, 12, 153-160.
35. Anonymous: Weld. J., 2002, 81, 58-58
36. Anonymous: Ind. Robot, 2002, 29, 170-171.
37. O. E. Canyurt, H. R. Kim and K. Y. Lee: Mech. Mater., 2008, 40, 825-831.
38. C. Kim, W. Choi, J. Kim and S. Rhee: Mater. Trans., 2008, 49, 179-186.
39. H. R. Kim, Y. W. Park and K. Y. Lee: Sci. Technol. Weld. Join., 2008, 13, 312-317.
40. G. A. Turichin, A. M. Grigor'ev, E. V. Zemlyakov, E. A. Valdaitseva, U. Dilthey and A. Gumeniuk: High Temp., 2006, 44, 647-655.
41. C. Bagger and F. O. Olsen: J. Laser Appl., 2004, 17, 2-14.
42. 2 laser-MAG hybrid welding of carbon steel', Proc. 1st Int. Symp. on 'High-power laser macroprocessing', Osaka, Japan, May 2002, Osaka University, 341-346.
43. M. Wouters, J. Powell and A. F. H. Kaplan: J. Laser Appl., 2006, 18, 181-184.
44. Y. Yao, M. Wouters, J. Powell, K. Nilsson and A. F. H. Kaplan: J. Laser Appl., 2006, 18, 283-288.
45. H. Staufer: Weld. J., 2007, 86, 36-40.
46. Anonymous: Adv. Mater. Processes, 2007, 165, 23-23
47. J. F. Coutouly, P. Deprez, J. Demonchaux and A. I. Koruk: Lasers Eng., 2006, 16, 399-411.
48. C. Y. Song, Y. W. Park, H. R. Kim, K. Y. Lee and J. Lee: Proc. Inst. Mech. Eng. B, J. Eng. Manuf., 2008, 222B, 507-518.
49. L. Liu, X. Hao and G. Song: Mater. Trans., 2006, 47, 1611-1614.
50. B. Hu and G. den Ouden: Sci. Technol. Weld. Join., 2005, 10, 76-81.
51. C. J. Page, T. Devermann, J. Biffin and N. Blundell: Sci. Technol. Weld. Join., 2002, 7, 1-10.
52. S. M. Joo, Y. P. Kim, C. S. Ro, H. S. Bang and J. U. Park: Adv. Nondestr. Eval., 2004, 270-273, Pt 1-3, 2383-2388.
53. T. Graf and H. Staufer: Weld. J., 2003, 82, 42-48.
54. M. Ono, Y. Shinbo, A. Yoshitake and M. Ohmura: 'Welding properties of thin steel sheets by laser-arc hybrid welding: laser-focused arc welding', Proc. 1st Int. Symp. on 'High-power laser macroprocessing', Osaka, Japan, May 2002, Osaka University, 369-374.
55. G. Song, L. M. Liu, M. S. Chi and J. F. Wang: Mater. Sci. Forum, 2005, 488-489, 371-375.
56. Y. B. Chen, Z. L. Lei and L. Wu: Sci. Technol. Weld. Join., 2006, 11, 403-411.
57. S. A. David, T. DebRoy and J. M. Vitek: MRS Bull, 1994, 19, 29-35.
58. T. DebRoy and S. A. David: Rev. Mod. Phys., 1995, 67, 85-112.
59. S. Mishra and T. DebRoy: Mater. Sci. Technol., 2006, 22, 253-278.
60. H. Zhao, D. R. White and T. Debroy: Int. Mater. Rev., 1999, 44, 238-266.
61. S. Mishra and T. DebRoy: Acta Mater., 2004, 52, 1183-1192.
62. S. Kou: 'Welding metallurgy', 13-62; 2003, New York, John Wiley & Sons.
63. J. F. Lancaster: 'The physics of welding', 9-29; 1986, New York, Pergamon Press.
64. S. Herbert: Weld. J., 2004, 83, 39-43.
65. R. Rai, G. G. Roy and T. DebRoy: J. Appl. Phys., 2007, 101, 054909.
66. R. Rai, J. W. Elmer, T. A. Palmer and T. DebRoy: J. Phys. D, 2007, 40D, 5753-5766.
67. R. Rai, S. M. Kelly, R. P. Martukanitz and T. DebRoy: Metall. Mater. Trans. A, 2008, 39A, 98-112.
68. A. De and T. DebRoy: Weld. J., 2005, 84, 101s-112s.
69. H. Zhao and T. Debroy: Metall. Mater. Trans. B, 2001, 32, 163-172.
70. S. A. David and T. Debroy: Science, 1992, 257, 497-502.
71. 2 lasers effects and applications'; 1976, San Diego, CA, Academic Press.
72. G. S. Arnold: Appl. Opt., 1984, 23, 1434-1436.
73. S. B. Boyden and Y. W. Zhang: J. Thermophys. Heat Transfer, 2006, 20, 9-15.
74. J. Greses, P. A. Hilton, C. Y. Barlow and W. M. Steen: J. Laser Appl., 2004, 16, 9-15.
75. W. W. Duley: 'Laser processing and analysis of materials'; 1983, New York, Plenum. Press.
76. M. von Allmen: 'Laser-beam interactions with materials'; 1987, New York, Springer-Verlag.
77. X. Z. Jin, L. J. Li and Y. Zhang: J. Phys. D, 2002, 35D, 2304-2310.
78. T. P. Hughes: 'Plasmas and laser light'; 1975, New York, John Wiley & Sons.
79. R. G. Lerner and G. L. Trigg: 'Encyclopedia of physics'; 1991, New York, VCH Publishers.
80. C. J. Nonhof: 'Material processing with Nd-lasers'; 1988, Ayr, Electrochemical Publications Limited.
81. S. Pfalzner and P. Gibbon: Phys. Rev. E, 1998, 57E, 4698-4705.
82. G. Xu, Z. Cheng, J. Xia, X. Li and J. Jiang: 'Laser keyhole welding on aluminum alloys', Proc. 1st Int. Symp. on 'High-power lasers in manufacturing', Osaka, Japan, May 2000, Osaka University, 710-716.
83. J. Mazumder: 'Laser-beam, welding', in 'ASM. handbook', Vol.6, 'Welding, brazing, and soldering', (ed. F. Reidenbach), 262-269; 1993, Materials Park, OH, ASM International.
84. J. H. Cho and S. J. Na: J. Phys. D, 2006, 39D, 5372-5378.
85. W. Zhang: 'Probing heat transfer, fluid flow and microstructural evolution during fusion welding of alloys', PhD thesis, Pennsylvania State University, University Park, PA, USA, 2004.
86. P. Sahoo, T. DebRoy and M. J. McNallan: Metall. Trans. B, 1988, 19B, 483-491.
87. D. A. Schauer, W. H. Giedt and S. M. Shintaku: Weld. J., 1978, 57, S127-S133.
88. J. D. Jackson: 'Classical electrodynamics'; 1998, New York, John Wiley & Sons.
89. K. Mundra, T. DebRoy and K. M. Kelkar: Numer. Heat Transfer A, 1996, 29A, 115-129.
90. R. T. C. Choo and J. Szekely: Weld. J., 1991, 70, S223-S233.
91. G. M. Oreper and J. Szekely: Metall. Trans. A, 1987, 18A, 1325-1332.
92. W. Zhang, G. G. Roy, J. W. Elmer and T. DebRoy: J. Appl. Phys., 2003, 93, 3022-3033.
93. B. E. Launder and D. B. Spalding: 'Lectures in mathematical model of turbulence'; 1972, London, Academic Press.
94. D. C. Wilcox: 'Turbulence modeling for CFD'; 1993, La Cañada, CA, DCW Industries.
95. T. DebRoy and A. K. Majumdar: J Met., 1981, 33, (11), 42-47.
96. M. El Rayes, C. Walz and G. Sepold: Weld. J., 2004, 83, 147s-153s.
97. L. M. Liu and X. Zhao: Mater. Charact., 2008, 59, 1279-1284.
98. H. Zhao and T. Debroy: J. Appl. Phys., 2003, 93, 10089-10096.
99. Y. Naito, M. Mizutani and S. Katayama: J. User Appl., 2006, 18, 21-27.
100. J. Kroos, U. Gratzke and G. Simon: J. Phys. D, 1993, 26D, 474-480.
101. V. Semak and A. Matsunawa: J. Phys. D, 1997, 30D, 2541-2552.
102. T. Klein, M. Vicanek, J. Kroos, I. Decker and G. Simon: J. Phys. D, 1994, 27D, 2023-2030.
103. P. A. A. Khan and T. DebRoy: Metall. Trans. B, 1984, 15B, 641-644.
104. D. R. Poirier and G. H. Geiger: 'Transport phenomena in materials processing'; 1994, Warrendale, PA, The Minerals, Metals, and Materials Society.
105. J. Kroos, U. Gratzke, M. Vicanek and G. Simon: J. Phys. D, 1993, 26D, 481-486.
106. S. Tsukamoto, I. Kawaguchi, G. Arakane and H. Honda: 'Keyhole behavior in high power laser welding', Proc. 1st Int. Symp. on 'High-power laser macroprocessing', Osaka, Japan, May 2002, Osaka University, 251-256.
107. P. Solana and J. L. Ocana: J. Phys. D, 1997, 30D, 1300-1313.
108. J. Tusek and M. Suban: Sci. Technol. Weld. Join., 1999, 4, 308-311.
109. P. Seyffarth: 'Laser-arc processes and their applications in welding and material treatment'; 2002, London, Taylor & Francis.
110. G. J. Dunn and T. W. Eager: Metall. Trans. A, 1986, 17, 1865-1871.
111. S. Akbar and K. Etemadi: Plasma Chem. Plasma Process., 1997, 17, 251-262.
112. K. C. Hsu, K. Etemadi and E. Pfender: J. Appl. Phys., 1982, 54, 1293-1301.
113. N. S. Tsai and T. W. Eager: Metall. Trans. B, 1985, 16B, 841-846.
114. H. B. Cary and S. C. Heizer: 'Modern welding technology'; 2005, Upper Saddle River, NJ, Pearson Education.
115. M. A. Uman: 'Introduction to plasma physics', 1-7; 1964, New York, McGraw-Hill.
116. F. F. Chen: 'Introduction to plasma physics and controlled fusion', Vol.I, 'Plasma physics', 3-7; 1984, New York, Plenum Press.
117. A. B. Cambel: 'Plasma physics and magnetofluidmechanics'; 1963, New York, McGraw-Hill.
118. A. B. Murphy: J. Phys. D, 2001, 34, R151-R173.
119. H. R. Griem: 'Plasma spectroscopy'; 1964, New York, McGraw-Hill.
120. F. Cabannes and J. Chapelle: 'Spectroscopic plasma diagnostics', 367-469; 1971, New York, Wiley InterScience.
121. P. W. J. M. Boumans: 'Theory of spectrochemical excitation', 79-88; 1966, New York, Plenum Press.
122. T. A. Palmer and T. DebRoy: Metall. Mater. Trans. B, 2000, 31B, 1371-1385.
123. T. A. Palmer and T. DebRoy: Sci. Technol. Weld. Join., 1998, 3, 190-203.
124. M. Pastor, H. Zhao, R. P. Martukanitz and T. DebRoy: Weld. J., 1999, 78, 207S-216S.
125. X. He, T. DebRoy and P. W. Fuerschbach: J. Appl. Phys., 2003, 94, 6949-6958.
126. G. N. Haddad and A. J. D. Farmer: Weld. J., 1985, 64, S399-S342.
127. A. E. F. Gick, M. B. C. Quigley and P. H. Richards: J. Phys. D, 1973, 6D, 1941-1949.
128. C. Fanara and I. M. Richardson: J. Phys. D, 2001, 34D, 2715-2725.
129. K. S. Drellishak, D. P. Aeschlim and A. B. Cambel: Phys. Fluids, 1965, 8, 1590-1600.
130. K. S. Drellishak, C. F. Knopp and A. B. Cambel: Phys. Fluids, 1963, 6, 1280-1288.
131. R. Miller and T. DebRoy: J. Appl. Phys., 1990, 68, 2045-2050.
132. M. M. Collur and T. DebRoy: Metall. Trans. B, 1989, 20B, 277-286.
133. B. Hu and G. den Ouden: Sci. Technol. Weld. Join., 2005, 10, 427-431.
134. P. Sahoo, M. M. Collur and T. DebRoy: Metall. Trans. B-Process Metall, 1988, 19, 967-972.
135. Y. Naito, S. Katayama and A. Matsunawa: 'Keyhole behavior and liquid flow in molten pool during laser-arc hybrid welding', Proc. 1st Int. Symp. on 'High-power laser macroprocessing', Osaka, Japan, May 2002, Osaka University, 357-362.
136. R. W. Messier: Weld. J., 2004, 83, 30-34.
137. G. Y. Zhao, M. Dassanavake and K. Etemadi: Plasma Chem. Plasma Process., 1990, 10, 87-98.
138. X. Zhou and J. Herberlein: J. Phys. D, 1998, 31D, 2577-2590.
139. J. Wang, K. Rusumoto and K. Nezu: Sci. Technol. Weld. Join., 2004, 9, 369-373.
140. M. Gao, X. Y. Zeng and Q. W. Hu: Sci. Technol. Weld. Join., 2006, 11, 517-522.
141. J. Zhou, W. H. Zhang, H. L. Tsai, S. P. Martin, P. C. Wang and R. Menassa: 'Modeling the transport phenomena during hybrid laser-MIG welding process', Proc. ASME Int. Mechanical Engineering Cong. and Expos., Washington, DC, USA, November 2003, ASME.
142. J. Zhou, and H. L. Tsai: Int. J. Heat Mass Transfer, 2008, 51, 4353-4366.
143. J. Dowden and P. Rapadla: J. Phys. D, 1995, 28D, 2252-2261.
144. Y. B. Chen, L. Q. Li, J. F. Fang and X. S. Feng: J. Mater. Sci. Technol., 2003, 19, 23-26.
145. E. W. Reutzel, M. J. Sullivan and D. A. Mikesic: Weld. J., 2006, 85, 66-71.
146. H. Zhao and T. DebRoy: Weld. J., 2001, 80, 204s-210s.
147. M. Ono, Y. Shinbo, A. Yoshitake and M. Ohmura: NKK Tech. Rev., 2002, 86, 8-12.
148. W. H. Zhang, J. Zhou and H. L. Tsai: 'Numerical modeling of keyhole dynamics in laser welding', Proc. 1st Int. Symp. on 'High-power laser macroprocessing', Osaka, Japan, May 2002, Osaka University, 180-185.
149. J. Defalco: Weld. J., 2007, 86, 47-51.
150. B. Hu and I. M. Richardson: Mater. Sci. Eng. A, 2006, A429, 287-294.
151. C. M. Allen, G. Verhaeghe, P. A. Hilton, C. P. Heason and P. B. Prangnell: Mater. Sci. Forum, 2006, 519-521, 1139-1144.
152. R. S. Coelho, A. Kostka, H. Pinto, S. Riekehr, M. Kocak and A. R. Pyzalla: Mater. Sci. Eng. A, 2008, A485, 20-30.
153. M. Shome: Mater. Sci. Eng. A, 2007, A445, 454-460.
154. L. M. Liu, G. Song, J. F. Wang and G. L. Liang: Trans. Nonferr. Met. Soc. China, 2004, 14, 550-555.
155. T. W. Kim, J. C. Kim, Y. Hasegawa and Y. Suga: Des. Process. Prop. Adv. Eng. Mater., 2004, 449-4, Pts 1 and 2, 417-420.
156. L. M. Liu, X. J. Liu and S. H. Liu: Scr. Mater., 2006, 55, 383-386.
157. L. M. Liu, G. Song and M. S. Chi: Mater. Sci. Technol., 2005, 21, 1078-1082.
158. Z. D. Zhang, L. M. Liu, Y. Shen and L. Wang: Mater. Charact., 2008, 59, 40-46.
159. A. De and T. DebRoy: J. Appl. Phys., 2004, 95, 5230-5240.
160. A. De and T. DebRoy: J. Phys D; Appl. Phys., 2004, 37, 140-150.