WC-reinforced (Ti,W)(CN)

Journal of the European Ceramic Society

Volumn 30, Issue 3, 2010, Pages 793-798

  Kang, Youngjae ^a   Kang, Shinhoo ^b  

^a NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

^b Seoul National University   (South Korea)

Author keywords

(Ti,W)(CN); Cutting tools; Microstructure; Platelets; Toughness and toughening

Indexed keywords

(TI,W)(CN); BINDER CONTENT; BINDER PHASE; CERAMIC MICROSTRUCTURES; CHEMICAL AFFINITIES; FORMATION MECHANISM; GAS SPECIES; HARDNESS VALUES; MILLED MIXTURE; SINTERING CONDITION; SINTERING PROCESS; SURFACE ENERGIES; THERMODYNAMIC INSTABILITY; TOUGHNESS AND TOUGHENING;

BINDERS; BLOOD SUBSTITUTES; METAL WORKING TOOLS; MICROSTRUCTURE; PLATELETS; SINTERING; STRUCTURAL CERAMICS; SURFACE CHEMISTRY; SURFACE TENSION; TUNGSTEN;

CUTTING TOOLS;

EID: 70449525206     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2009.09.013     Document Type: Article

References (41)

1. Zhang S. Titanium carbonitride-based cermets: process and properties. Mater. Sci. Eng. A 163 (1993) 141-148
2. Park S., and Kang S. Toughened ultra-fine (Ti,W)(CN)-Ni cermets. Scr. Mater. 52 (2005) 129-133
3. Jung J., and Kang S. Sintered (Ti,W)C carbides. Scr. Mater. 56 (2007) 561-564
4. Park D.S., Lee Y.D., and Kang S. Effect of carbides on the microstructure and properties of Ti(C,N)-based ceramics. J. Am. Ceram. Soc. 82 (1999) 3150-3154
5. Xu C., Ai X., and Huang C. Fabrication and performance of an advanced ceramic tool material. Wear 249 (2001) 503-508
6. Tashima S., Yamane Y., Kuroki H., and Narutaki N.J. Cutting performance of high purity alumina ceramic tools formed by a high-speed centrifugal compaction process. J. Mater. Proc. Technol. 62 (1996) 431-434
7. Strecker K., Ribeiro S., Oberacker R., and Hoffmann M.J. Influence of microstructural variation on fracture toughness of LPS-SiC ceramics. Int. J. Ref. Met. Hard Mater. 22 (2004) 169-175
8. Liu X.-J., Huang Z.-Y., Pu X.-P., Sun X.-W., and Huang L.-P. Influence of planetary high-energy ball milling on microstructure and mechanical properties of silicon nitride ceramics. J. Am. Ceram. Soc. 88 (2005) 1323-1326
9. Ren R.M., Yang Z.G., and Shaw L.L. Synthesis of nanostructured TiC via carbothermic reduction enhanced by mechanical activation. Scr. Mater. 38 (1998) 735-741
10. Park S., Kang Y.J., Kwon H.J., and Kang S. Synthesis of (Ti,M1,M2)(CN)-Ni nanocrystalline powders. Int. J. Refract. Met. Hard Mater. 24 (2006) 115-121
11. Kwon H., and Kang S. Effect of milling on the carbothermal reduction of oxide mixture for (Ti,W)C-Ni. Mater. Trans. 49 (2008) 1594-1599
12. Kwon H., and Kang S. Carbothermal reduction of titanium monoxide (TiO). J. Ceram. Soc. Jpn. 116 (2008) 1154-1158
13. Padture N.P. In situ-toughened silicon carbide. J. Am. Ceram. Soc. 77 (1994) 519-523
14. Ohji T., Hiral K., and Kanzaki S. Fracture resistance behavior of highly anisotropic silicon nitride. J. Am. Ceram. Soc. 78 (1995) 3125-3128
15. Li T., Li Q., Fuh J.Y.H., Yu P.C., Lu L., and Wu C.C. Effects of AGG on fracture toughness of tungsten carbide. Mater. Sci. Eng. A 445-446 (2007) 587-592
16. Chen L., Lengauer W., and Dreyer K. Advances in modern nitrogen-containing hardmetals and cermets. Int. J. Refract. Met. Hard Mater. 18 (2000) 153-161
17. Sommer M., Schubert W.D., Zobetz E., and Warbichler P. On the formation of very large WC crystals during sintering of ultrafine WC-Co alloys. Int. J. Refract. Met. Hard Mater. 20 (2002) 41-50
18. Yoon B.K., Lee B.A., and Kang S.J.L. Growth behavior of rounded (Ti,W)C and faceted WC grains in a Co matrix during liquid phase sintering. Acta Mater. 53 (2005) 4677-4685
19. Li T., Li Q., Fuh J.Y.H., Yu P.C., Lu L., and Wu C.C. Effects of lower cobalt binder concentrations in sintering of tungsten carbide. Mater. Sci. Eng. A 430 (2006) 113-119
20. Lee H.R., Kim D.J., Hwang N.M., and Kim D.-Y. Role of vanadium carbide additive during sintering of WC-Co: mechanism of grain growth inhibition. J. Am. Ceram. Soc. 86 (2003) 152-154
21. Lay S., Loubradou M., and Schubert W.-D. Structural analysis on planar defects formed in WC platelets in Ti-doped WC-Co. J. Am. Ceram. Soc. 89 (2006) 3229-3234
22. Schön A., Schubert W.D., and Lux B. WC platelet-containing hardmetals. Proceedings of the 15th International Plansee Seminar. Reutte, Austria (2001) 322-336
23. Brun M.K., Neguraonkar R.R., and Stubican V.S. Precipitation studies in the system WC-TiC. J. Am. Ceram. Soc. 58 (1975) 392-395
24. She Z. A Study on decomposition conditions of TiC-WC solid solutions. Ref. Met. Hard Mater. 9 (1990) 154-156
25. Evans A.G., and Charles E.A. Fracture toughness determination by indentation. J. Am. Ceram. Soc. 59 (1976) 371-372
26. Doi A., Nomura T., Tobioka T., and Takahashi K. Thermodynamic evaluation of equilibrium nitrogen pressure and WC separation in Ti-W-C-N system carbonitride. Proceedings of the 11th International Plansee Seminar. Reutte, Austria (1985) 825-843
27. Jung, J., A study of the formation and thermo-properties of (Ti,W)(CN). Ph.D. Thesis, Seoul National University, Korea, 2006.
28. Park Y.J., Hwang N.M., and Yoon D.Y. Abormal growth of faceted (WC) grains in a (Co) liquid matrix. Metall. Mater. Trans. A 27 (1996) 2809-2819
29. Lay S., Allibert C.H., Christensen M., and Wahnström G. Morphology of WC grains in WC-Co alloys. Mater. Sci. Eng. A 486 (2008) 253-261
30. Lee D.-B., and Chae K.-W. Effect of co additive on the abnormal grain growth of WC. J. Kor. Ceram. Soc. 41 (2004) 131-135
31. Ahn S.Y., and Kang S. Formation of core/rim structures in Ti(C,N)-WC-Ni cermets via a dissolution and precipitation process. J. Am. Ceram. Soc. 83 (2000) 1489-1494
32. 0.3)-WC-Ni system. Int. J. Refract. Met. Hard Mater. 26 (2008) 340-345
33. 3-SiC nanocomposites. J. Eur. Ceram. Soc. 22 (2002) 1543-1552
34. 4/SiC nanocomposite. Mater. Lett. 32 (1997) 251-257
35. 4/TiN nanocomposites ceramic tool materials. J. Mater. Proc. Technol. 209 (2009) 4595-4600
36. 2 as sintering aid. J. Eur. Ceram. Soc. 28 (2008) 1287-1296
37. Bellosi A., Medri V., and Monteverde F. Processing and properties of Ti(C, N)-WC-based materials. J. Am. Ceram. Soc. 84 (2001) 2669-2676
38. Chou Y.-S., and Green D.J. Silicon carbide platelet/alumina composites: III, toughening mechanisms. J. Am. Ceram. Soc. 76 (1993) 1985-1992
39. Lee Y.-I., and Kim Y.-W. Toughening mechanism in SiC-TiC composites. J. Ceram. Soc. Jpn. 112 (2004) 18-21
40. Lee S.-G., Kim Y.-W., and Mitomo M. Relationship between microstructure and fracture toughness of toughened silicon carbide ceramics. J. Am. Ceram. Soc. 84 (2001) 1347-1353
41. Becher P.F. Microstructural design of toughened ceramics. J. Am. Ceram. Soc. 74 (1991) 255-269