Multianvil high-pressure/high-temperature synthesis in solid state chemistry

Zeitschrift fur Kristallographie

Volumn 219, Issue 6, 2004, Pages 330-338

  Huppertz, Hubert ^a  

^a UNIVERSITY OF MUNICH   (Germany)

Author keywords

Borates; High pressure; High temperature; Multianvil synthesis

Indexed keywords

CONFERENCE PAPER; COST; HIGH TEMPERATURE PROCEDURES; HYDROSTATIC PRESSURE; PRESSURE; REACTION ANALYSIS; SOLID STATE; STRUCTURE ANALYSIS; SYNTHESIS;

EID: 7044258679     PISSN: 00442968     EISSN: None     Source Type: Journal    
DOI: 10.1524/zkri.219.6.330.34633     Document Type: Conference Paper

References (82)

1. Holloway, J. R.; Wood, B. J.: Simulating the Earth. Harper Collins Academic, London 1988.
2. Jessop, P. G.; Leitner, W.; Chemical Synthesis Using Supercritical Fluids. Wiley-VCH, Weinheim 1999.
3. Bröll, D.; Kaul, C.; Krämer, A.; Krammer, P.; Richter, T.; Jung, M.; Vogel, H.; Zehner, P.: Chemie in überkritischem Wasser; Angew. Chem. 111 (1999) 3181-3196; Chemistry in Supercritical Water. Angew. Chem. Int. Ed. 38 (1999) 2999-3014.
4. Bröll, D.; Kaul, C.; Krämer, A.; Krammer, P.; Richter, T.; Jung, M.; Vogel, H.; Zehner, P.: Chemie in überkritischem Wasser; Angew. Chem. 111 (1999) 3181-3196; Chemistry in Supercritical Water. Angew. Chem. Int. Ed. 38 (1999) 2999-3014.
5. 2 Proc. Roy. Soc. (London) A203 (1950) 1-17.
6. Hall, H. T.:, Ultra-High-Pressure, High-Temperature Apparatus: the "Belt". Rev. Sci. Instrum. 31 (1960) 125-131.
7. Kanke, Y.; Akaishi, M.; Yamaoka, S.; Taniguchi, T.: Heater cell for materials synthesis in the large volume high pressure apparatus at 10 GPa. Rev. Sci. Instrum. 73 (2002) 3268-3270.
8. Boyd, F. R.; England, J. L.: Apparatus for Phase-Equilibrium Measurements at Pressures up to 50 Kilobars and Temperatures up to 1750 °C. J. Geophys. Res. 65 (1960) 741-748.
9. 2-Laser Heating Technique in a Diamond Cell. In: Handbook of Ceramics and Hard Materials (Ed. R. Riedel) Vol. 1, p. 41-65. Wiley VCH, Weinheim 2000.
10. Hall, H. T.: Some High-Pressure, High-Temperature Apparatus Design Considerations: Equipment for Use at 100000 Atmospheres and 3000 °C. Rev. Sci. Instrum. 29 (1958) 267-275.
11. Contre M.: Presse spéciale à enclumes hexaédriques. High Temp.-High Pressures 1 (1969) 339-356.
12. Von Platen, B.: A Multiple Piston, High-Pressure, High-Temperature Apparatus. In: Modern Very High Pressure Techniques (Ed. R. H. Wentorf Jr.), p. 118-136, Butterworth, London 1962.
13. Lloyd, E. C.; Hutton, U. O.; Johnson, D. P.: Compact Multi-Anvil Wedge-Type High Pressure Apparatus. J. Res. Nat. Bur. Std. 63c (1959) 59-64.
14. Houck, J. C.; Hutton, U. O.: Correlation of Factors influencing the Pressures generated in Multi-Anvil Devices. In: High Pressure Measurement. (Eds. A. A. Giardini, E. C. Lloyd), p. 221-245. Butterworths, Washington 1962.
15. Osugi, J.; Shimizu, K.; Inoue, K.; Yasunami, K.: A Compact Cubic Anvil High Pressure Apparatus. Rev. Phys. Chem. Japan 34 (1964) 1-6.
16. 3 perovskite at 25 GPa by double-stage multianvil system. J. Geophys. Res. 100 (1995) 20475-20481.
17. Kawai, N.: A Static High Pressure Apparatus with Tapering Multi-Pistons Forming a Sphere. Proc. Jpn. Acad. 42 (1966) 385-388.
18. Kawai, N.; Endo, S.: The Generation of Ultrahigh Hydrostatic Pressures by a Split Sphere Apparatus. Rev. Sci. Instrum. 41 (1970) 1178-1181.
19. Onodera, A.: Octahedral-anvil high-pressure devices. High Temp.-High Pressures 19 (1987) 579-609.
20. Kawai, N.; Togaya, M.; Onodera, A.: A New Device for Pressure Vessels. Proc. Jpn. Acad. 49 (1973) 623-626.
21. Prikhna, A. I.; Borimsky, A. I.: A Cubic High Pressure Chamber. Sinteticheskie Almazy 3 (1974) 6-8.
22. Prikhna, A. I.; Borimsky, A. I.: High Temperature-High Pressure Apparatus for growing Diamond Monocrystals. J. Cryst. Growth 26 (1974) 129-132.
23. Walker, D.; Carpenter, M. A.; Hitch, C. M.: Some simplifications to multianvil devices for high pressure experiments. Am. Mineral. 75 (1990) 1020-1028.
24. Ohtani, E.; Irifune, T.; Hibberson, W. O.; Ringwood, A. E.: Modified split-sphere guide block for practical operation of a multiple-anvil apparatus. High Temp.-High Pressures 19 (1987) 523-529.
25. Walker, D.: Lubrication, gasketing, and precision in multianvil experiments. Am. Mineral. 76 (1991) 1092-1100.
26. Frost, D. J.: Personal Communication.
27. Rubie, D. C.: Characterizing the sample environment in multianvil high-pressure experiments. Phase Trans. 68 (1999) 431-451.
28. Liebermann, R. C.; Wang, Y.: Characterization of sample environment in a uniaxial split-sphere apparatus. In: High-Pressure Research: Application to Earth and Planetary Sciences (Eds. Y. Syono, M. H. Manghnani), p. 19-31. American Geophysical Union, Washington 1992.
29. Walter, M. J.; Thibault, Y.; Wei, K.; Luth, R. W.: Characterizing experimental pressure and temperature conditions in multi-anvil apparatus. Can. J. Phys. 73 (1995) 273-286.
30. Zhang, J.; Li, B.; Utsumi, W.; Liebermann, R. C.; In situ X-ray observations of the coesite-stishovite transition: reversed phase boundary and kinetics. Phys. Chem. Minerals 23 (1996) 1-10.
31. Frost, D. J.; Poe, B. T.; Trønnes, R. G.; Liebske, C.; Duba, A.; Rubie, D. C.: A New Large-Volume Multianvil System. Phys. Earth Planet Interiors (2004) in press.
32. 3 sample volume. High Temp.-High Pressures 18 (1986) 301-310.
33. Schmidt, M.W.; Ulmer, P.: A rocking multi-anvil: Elimination of chemical segregation in fluid-saturated high pressure experiments. Geochim. Cosmochim. Acta 68 (2004) 1889-1899.
34. Getting, I. C.; Chen, G.; Brown, J. A.: The Strength and Rheology of Commercial Tungsten Carbide Cermets used in High-pressure Apparatus. Pure Appl. Geophys. 141 (1993) 545-577.
35. 12) in a sintered diamond cubic anvil assembly. Geophys. Res. Let. 25 (1998) 821-824.
36. Kondo, T.; Sawamoto, H.; Yoneda, A.; Kato, M.; Matsumoto, A.; Yagi, T.: Ultrahigh-pressure and high-temperature generation by use of the MA8 system with sintered-diamond anvils. High Temp.-High Pressures 25 (1993) 105-112.
37. 12 up to 32 GPa and 2000 K using MA8-type apparatus. Rev. High Press. Sci. Tech. 7 (1998) 59-61.
38. Ohtani, E.; Kagawa, N.; Shimomura, O.; Togaya, M.; Suito, K.; Onodera, A.; Sawamoto, H.; Yoneda, M.; Tanaka, S.; Utsumi, W.; Ito, E.; Matsumuro, A.; Kikegawa, T.: High-Pressure generation by a multiple anvil system with sintered diamond anvils. Rev. Sci. Instrum. 60 (1989) 922-925.
39. 4 spinel to 40 GPa using multianvil apparatus with sintered diamond anvils. Phys. Chem. Minerals 29 (2002) 645-654.
40. Wang, Y.; Rivers, M.; Sutton, S.; Eng, P.; Shen, G.; Getting, I.: A multi-anvil, high-pressure facility for synchrotron radiation research at GeoSoilEnviroCARS at the Advanced Photon Source. Rev. High Pressure Sci. Technol. 7 (1998) 1490-1495.
41. Ultrahigh-Pressure Mineralogy: Physics and Chemistry of the Earth's Deep Interior, (Ed. R. J. Hemley), Reviews in Mineralogy 37, Mineralogical Society of America, Washington 1998.
42. Neuhaus, A.: Synthese, Strukturverhalten und Valenzzustände der anorganischen Materie im Bereich hoher und höchster Drucke. Chimia 18 (1964) 93-103.
43. Kleber, W.; Wilke, K.-Th.: Synthese und Kristallchemie anorganischer Stoffe bei hohen Drücken und Temperaturen. Kristall und Technik 4 (1969) 165-199.
44. Range, K.-J.: Festkörperchemie bei hohen Drücken. Chem. unserer Zeit 10 (1976) 180-188.
45. High-Temperature and High-Pressure Crystal Chemistry, (Eds. M. Hazen, R. T. Downs), Reviews in Mineralogy 41, Mineralogical Society of America, Washington 2000.
46. Schilling, J. S.: The use of high pressure in basic, materials, and life sciences. Hyperfine Interact. 128 (2000) 3-27.
47. McMillan, P. F.: Chemistry of materials under extreme high pressure-high-temperature conditions. Chem. Comm. (2003) 919.
48. McMillan, P. F.: High pressure synthesis of solids. Curr. Opin. Solid State Mater. Sci. 4 (1999) 171-178.
49. McMillan, P. F.: Chemistry under extreme conditions. Eur. J. Solid State Inorg. Chem. 34 (1997) 621-626.
50. McMillan, P. F.: New materials from high-pressure experiments. Nature Mat. 1 (2002) 19-25.
51. Demazeau, G.: High pressure in solid-state chemistry. J. Phys.: Condens. Matter 14 (2002) 11031-11035.
52. Demazeau, G.: High pressures: a route to the synthesis of new materials. Eur. J. Solid State Inorg. Chem. 34 (1997) 759-771.
53. Liu, A. Y.; Cohen, M. L.: Prediction of New Low Compressibility Solids. Science 245 (1989) 841-842.
54. Teter, D. M.; Hemley, R. J.: Low-Compressibility Carbon Nitrides. Science 271 (1996) 53-55.
55. 2N, a new superhard phase. Diamond Relat. Mater. 10 (2001) 228-2231.
56. 2N. Appl. Phys. Lett. 78 (2001) 1385-1387.
57. Hubert, H.; Garvie, L. A. J.; Buseck, P. R.; Petuskey, W. T.; McMillan, P. F.: High-Pressure, High-Temperature Syntheses in the B-C-N-O System I. Preparation and Characterization. J. Solid State Chem. 133 (1997) 356-364.
58. Garvie, L. A. J.; Hubert, H.; Petuskey, W. T.; McMillan, P. F.; Buseck, P. R.: High-Pressure, High-Temperature Syntheses in the B-C-N-O System II. Electron Energy-Loss Spectroscopy (EELS). J. Solid State Chem. 133 (1997) 365-371.
59. 6O). Nature 391 (1998) 376-378.
60. 6O). Chem. Mater. 10 (1998) 1530-1537.
61. 5 Pyramids. Angew. Chem. Int. Ed. Engl. 40 (2001) 2643-2645.
62. 5 Pyramids. Angew. Chem. Int. Ed. Engl. 40 (2001) 2643-2645.
63. 4-Tetraedem. Z. Anorg. Allg. Chem. 628 (2002) 1465-1471.
64. 5 with Kyanite-Type Structure. Chem. Eur. J. 8 (2002) 3530-3537.
65. Zerr, A.; Miehe, G.; Serghiou, G.; Schwarz, M.; Kroke, E.; Riedel, R.; Fueß, H.; Kroll, P.; Boehler, R.: Synthesis of cubic silicon nitride. Nature 400 (1999) 340-342.
66. 4: Multi-Anvil Press Synthesis and Structural Refinement. Adv. Mater. 12 (2000) 883-887.
67. 4 phase at high pressures and temperatures. J. Chem. Phys. 111 (1999) 4659-4662.
68. 4. Chem. Eur. J. 5 (1999) 3076-3078.
69. 4, ein Zinn(IV)-nitrid - Synthese und erste Strukturbestimmung einer binären Zinn-Stickstoff-Verbindung. Z. Anorg. Allg. Chem. 625 (1999) 1435-1439.
70. Schnick, W.: Die ersten Nitrid-Spinelle - neue Synthesewege für binäre Nitride der 4. Hauptgruppe. Angew. Chem. 111 (1999) 3511-3512; The First Nitride Spinels - New Synthetic Approaches to Binary Group 14 Nitrides. Angew. Chem. Int. Ed. Engl. 38 (1999) 3309-3310.
71. Schnick, W.: Die ersten Nitrid-Spinelle - neue Synthesewege für binäre Nitride der 4. Hauptgruppe. Angew. Chem. 111 (1999) 3511-3512; The First Nitride Spinels - New Synthetic Approaches to Binary Group 14 Nitrides. Angew. Chem. Int. Ed. Engl. 38 (1999) 3309-3310.
72. Jiang, J. Z.; Kragh, F.; Frost, D. J.; Stähl, K.; Lindelov, H.: Hardness and thermal stability of cubic silicon nitride. J. Phys.: Condens Matter 13 (2001) L515-L520.
73. 4 to a high-pressure cubic-spinel phase. Appl. Phys. Lett. 76 (2000) 3706-3708.
74. 4. Phys. Rev. B62 (2000) 11412-11417.
75. 4. Phys. Status Solidi B227 (2001) R4-R6.
76. 4 Tetrahedra. J. Am. Chem. Soc. 124 (2002) 9376-9377.
77. 15 (RE = Dy, Ho) with an Extension of the "Fundamental Building Block"-Descriptors. Z. Naturforsch. 58b (2003) 278-290.
78. 4-Tetraedem. Z. Anorg. Allg. Chem. 628 (2002) 2165.
79. 4 Tetrahedra. Chem. Eur. J. 9 (2003) 3623-3633.
80. 8 cubes. Solid State Sci. 4 (2002) 103-107.
81. 1.44. J. Solid State Chem. 169 (2002) 155-159.
82. 8 (x = 0.20 and 0.26) prepared under high pressure and high temperature. Z. Kristallogr. 217 (2002) 510-514.