Development of biomedical porous titanium filled with medical polymer by in-situ polymerization of monomer solution infiltrated into pores

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 3, Issue 1, 2010, Pages 41-50

  Nakai, Masaaki ^a   Niinomi, Mitsuo ^a   Akahori, Toshikazu ^a   Tsutsumi, Harumi ^a   Itsuno, Shinichi ^b   Haraguchi, Naoki ^b   Itoh, Yoshinori ^c   Ogasawara, Tadashi ^d   Onishi, Takashi ^d   Shindoh, Taku ^e  

^a TOHOKU UNIVERSITY   (Japan)

^b TOYOHASHI UNIVERSITY OF TECHNOLOGY   (Japan)

^c Hamamatsu Industrial Research Institute of Shizuoka Prefecture   (Japan)

^d Osaka Titanium Technologies Co Ltd   (Japan)

^e TOHOKU UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMEDICAL APPLICATIONS; HUMAN BONES; IN-SITU POLYMERIZATION; LOW YOUNG'S MODULUS; MEDICAL POLYMERS; METALLIC MATERIAL; MONOMER SOLUTIONS; POROUS METALLIC MATERIALS; POROUS TITANIUM; SILANE COUPLING AGENT; TITANIUM PARTICLES; YOUNG'S MODULUS;

BONE; COUPLING AGENTS; ELASTIC MODULI; ELASTICITY; FUNCTIONAL POLYMERS; MECHANICAL PROPERTIES; PHOTORESISTS; POLYMERS; SILANES; STRESS CONCENTRATION; TITANIUM;

TENSILE STRENGTH;

BIOMATERIAL; POLY(METHYL METHACRYLATE); TITANIUM;

ARTICLE; COMPOSITE MATERIAL; MECHANICAL STRESS; POLYMERIZATION; PRIORITY JOURNAL; TENSILE STRENGTH;

AIR; BIOCOMPATIBLE MATERIALS; ELASTIC MODULUS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; POLYMERS; POLYMETHYL METHACRYLATE; POROSITY; TEMPERATURE; TENSILE STRENGTH; TIME FACTORS; TITANIUM; WATER;

EID: 70350572943     PISSN: 17516161     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2009.03.003     Document Type: Article

References (32)

1. Ahmed T., Long M., Silvestri J., Ruiz C., and Rack H.J. A new low modulus, biocompatible titanium alloy. In: Blenkinsop P.A., Evans W.J., and Flower H.M. (Eds). Titanium '95 Science and Technology (1996), The Institute of Materials, London 1760-1767
2. Borzelleca J.F., Larson P.S., Hennigar G.R., Huf E.G., Crawford E.M., and Smith R.B. Studies on the chronic oral toxicity of monomeric ethyl acrylate and methyl methacrylatel. Toxic. Appl. Pharm. 6 (1964) 29-36
3. Cameron H.U., Pilliar R.M., and Macnab I. The rate of bone ingrowth into porous metal. J. Biomed. Mater. Res. 10 (1976) 295-302
4. Dunand D.C. Processing of titanium foams. Adv. Eng. Mater. 6 (2004) 369-376
5. 2. Acta Mater. 56 (2008) 5147-5157
6. Esen Z., and Bor S. Processing of titanium foams using magnesium spacer particles. Scr. Mater. 56 (2007) 341-344
7. Hao Y.L., Li S.J., Sun S.Y., and Yang R. Effect of Zr and Sn on Young's modulus and superelasticity of Ti-Nb-based alloys. Mater. Sci. Eng. A 441 (2006) 112-118
8. Honda K. Akuriru Jushi (1961), The Nikkan Kogyo Shimbun Ltd., Tokyo
9. Imai Y., and Brown N. Environmental crazing and intrinsic tensile deformation in polymethylmethacrylate. Part 1. Mechanical behaviour. J. Mater. Sci. 11 (1976) 417-424
10. Ishii, D., Niinomi, M., Nakai, M., Akahori, T., Tsutsumi, H., 2009. Fabrication of porous titanium/biodegradable polymer composite by monomer impregnation and its polymerization. In: Abstracts of 117th Lecture Presentation in Institute for Materials Research, pp. 17
11. Kienapfel H., Sprey C., Wilke A., and Griss P. Implant fixation by bone ingrowth. J. Arthroplasty 14 (1999) 355-368
12. Kuroda D., Niinomi M., Morinaga M., Kato Y., and Yashiro T. Design and mechanical properties of new β type titanium alloys for implant materials. Mater. Sci. Eng. A 243 (1998) 244-249
13. Matsumoto H., Watanabe S., and Hanada S. Beta TiNbSn alloys with low Young's modulus and high strength. Mater. Trans. 46 (2005) 1070-1078
14. Mir G.N., Lawrence W.H., and Autian J. Toxicological and pharmacological actions of methacrylate monomers. I: Effects on isolated, perfused rabbit heart. J. Pharm. Sci. 62 (1973) 778-782
15. Moyen B.J., Lahey P.J., Weinberg E.H., and Harris W.H. Effects on intact femora of dogs of the application and removal of metal plates. A metabolic and structural study comparing stiffer and more flexible plates. J. Bone Joint Surg. (Am) 60A (1978) 940-947
16. Murray N.G.D., and Dunand D.C. Effect of initial preform porosity on solid-state foaming of titanium. J. Mater. Res. 21 (2006) 1175-1188
17. Nakai M., Niinomi M., Akahori T., Shinozaki Y., Toda H., Itsuno S., Haraguchi N., Itoh Y., Ogasawara T., and Onishi T. Mechanical properties of porous titanium filled with polymethylmethacrylate for biomedical applications. Proc. of International conference on advanced technology in experimental mechanics 2007. ATEM'07 (2007), The Japan Society of Mechanical Engineers CD-ROM, OS07-1-4
18. Nakai, M., Niinomi, M., Akahori, T., Yamanoi, H., Itsuno, S., Haraguchi, N., Itoh, Y., Ogasawara, T., Onishi, T., Shindoh, T., 2008a. Effective utilization of space between particles in porous titanium for improving mechanical properties and biofunctionalities using medical polymer filling technique. In: Abstracts of 8th World Biomaterials Congress, WBC, CD-ROM
19. Nakai M., Niinomi M., Akahori T., Shinozaki Y., Itsuno S., Haraguchi N., Itoh Y., Ogasawara T., and Onishi T. Improvement in mechanical properties of porous titanium by biomedical polymer filling. In: Lefebvre L.P., Banhart J., and Dunand D.C. (Eds). Porous Metals and Metallic Foams (2008), DEStech Publications Inc. 283-286
20. Niinomi M. Mechanical biocompatibilities of titanium alloys for biomedical applications. J. Mech. Behav. Biomed. Mater. 1 (2008) 30-42
21. Oh I.H., Nomura N., and Hanada S. Microstructures and mechanical properties of porous titanium compacts prepared by powder sintering. Mater. Trans. 43 (2002) 443-446
22. Oh I.H., Nomura N., Masahashi N., and Hanada S. Mechanical properties of porous titanium compacts prepared by powder sintering. Scr. Mater. 49 (2003) 1197-1202
23. Onishi T., Azuma K., and Ogasawara T. Production of titanium porous material "Tiporous" and its evaluation. Mater. Sci. Forum 534-536 (2007) 993-996
24. Raravikar N.R., Schadler L.S., Vijayaraghavan A., Zhao Y., Wei B., and Ajayan P.M. Synthesis and characterization of thickness-aligned carbon nanotube-polymer composite films. Chem. Mater. 17 (2005) 974-983
25. Rho J.Y., Tsui T.Y., and Pharr G.M. Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation. Biomater. 18 (1997) 1325-1330
26. Ryan G., Pandit A., and Apatsidis D.P. Fabrication methods of porous metals for use in orthopaedic applications. Biomater. 27 (2006) 2651-2670
27. Saito T., Furuta T., Hwang J.H., Kuramoto S., Nishino K., Suzuki N., Chen R., Yamada A., Ito K., Seno Y., Nonaka T., Ikehata H., Nagasako N., Iwamoto C., Ikuhara Y., and Sakuma T. Multifunctional alloys obtained via a dislocation-free plastic deformation mechanism. Science 300 (2003) 464-467
28. Shiraishi H., Arimoto N., Yamasaki K., and Mori S. Manufacturing technique of titanium powders by gas atomizing process. Materia Japan 34 (1995) 792-794
29. Sumitomo N., Noritake K., Hattori T., Morikawa K., Niwa S., Sato K., and Niinomi M. Experiment study on fracture fixation with low rigidity titanium alloy. J. Mater. Sci. Mater. Med. 19 (2008) 1581-1586
30. Uhthoff H.K., and Finnegan M. The effects of metal plates on post-traumatic remodelling and bone mass. J. Bone Joint Surg. (Br) 65B (1983) 66-71
31. Young R.J., and Beaumont P.W.R. Time-dependent failure of poly (methyl methacrylate). Polymer 17 (1976) 717-722
32. Zioupos P., and Currey J.D. Changes in stiffness strength and toughness of human cortical bone with age. Bone 22 (1998) 57-66