Morphological characteristic of the conventional and melt-spun Al-10Ni-5.6Cu (in wt.%) alloy

Materials Characterization

Volumn 60, Issue 12, 2009, Pages 1569-1577

  Karaköse, Ercan ^a   Keskin, Mustafa ^a  

^a ERCIYES UNIVERSITY   (Turkey)

Author keywords

Al Ni Cu alloy; Microhardness; Microstructure; Rapidly solidification

Indexed keywords

AL-NI-CU ALLOY; ALUMINUM MATRIX; CELLULAR STRUCTURE; CONVENTIONAL CASTING; CU ALLOY; INGOT ALLOYS; MELT-SPINNING TECHNIQUES; MELT-SPUN; MELT-SPUN RIBBONS; MICROHARDNESS TECHNIQUE; MORPHOLOGICAL CHARACTERISTIC; NI PARTICLES; POLYGONAL STRUCTURES; RAPIDLY SOLIDIFICATION; RAPIDLY SOLIDIFIED; SOLIDIFICATION RATE;

ALLOYS; ALUMINA; ALUMINUM; CERIUM ALLOYS; CRYSTALLIZATION; DIFFERENTIAL SCANNING CALORIMETRY; DIFFRACTION; INGOTS; INTEGRATED OPTOELECTRONICS; MELT SPINNING; MICROHARDNESS; MICROSTRUCTURE; NICKEL; OPTICAL DATA STORAGE; OPTICAL INSTRUMENTS; OPTICAL MICROSCOPY; RAPID SOLIDIFICATION; SCANNING; SCANNING ELECTRON MICROSCOPY; X RAY DIFFRACTION; X RAY DIFFRACTION ANALYSIS;

COPPER ALLOYS;

EID: 70350571230     PISSN: 10445803     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matchar.2009.09.008     Document Type: Article

References (43)

1. Duwez P., Willens R.H., and Klement W. Continuous series of metastable solid solutions in silver-copper alloys. J Appl Phys 31 (1960) 1136-1137
2. Anantharama T.R., and Suryanarayana C. Rapidly solidified metals. Aedermannsdorf (Switzerland): Trans Tech Publications (1987) 25-79
3. Jones H. Microstructure Rapidly Solidified Materials. Mater Sci Eng 65 (1984) 145-156
4. Honeycombe R.W.K. In: Cantor B. (Ed). Rapidly quenched metals III vol. 1 (1978), The Metals Society, London 73
5. Lopez I.A., Zepeda C.M., Reyez J.G.G., Flores A.M., Rodriguez J.S., and Gomez L.B. TEM microstructural characterization of melt-spun aged Al-6Si-3Cu-xMg alloys. Mater Charact 58 (2007) 509-518
6. Liu P., Kang B.X., Cao X.G., Huang J.L., Yen B., and Gu H.C. Aging precipitation recrystallization of rapidly solidified Cu-Cr-Zr-Mg alloy. Mater Sci Eng A 265 (1999) 262-267
7. Rosas G., Reyes-Gasta J., and Perez R. Morphological characteristics of the rapidly and conventionally solidified alloys of the AlCuFe system. Mater Charact 58 (2007) 765-770
8. Pons J., Segui C., Chernenko V.A., Cesari E., Ochin P., and Portier R. Transformation and ageing behaviour of melt-spun Ni-Mn-Ga shape memory alloys. Mater Sci Eng A 273 (1999) 315-319
9. Lavernia E.J., Ayers J.D., and Srivatsan T.S. Rapid solidification processing with specific application to aluminum-alloys. Int Mater Rev 37 (1992) 1-44
10. Gogebakan M., Uzun O., Karaaslan T., and Keskin M. Rapidly solidified Al-6.5 wt% Ni alloys. J Mater Process Technol 142 (2003) 87-92
11. Sieber H., Park J.S., Wei{dotless}ssmüller J., and Perepezko J.H. Structural evoluti{dotless}on and phase formati{dotless}on i{dotless}n cold-rolled alumi{dotless}num-ni{dotless}ckel multi{dotless}layers. Acta Mater 49 (2001) 1139-1151
12. Gonzalez G., Lara-Rodriguez G.A., Sandoval-Jiménez A., Saikaly W., and Charai A. The influence of cooling rate on the microstructure of an Al-Ni Hypereutectic alloy. Mater Charact 59 (2008) 1607-1612
13. 6 comparison of XRD, DSC, and TEM. Scr Mater 48 (2003) 1537-1541
14. 10 bulk hybrid composites. Intermetallics 14 (2006) 1069-1074
15. Srinivasan D., and Chattopadhyay K. Hardness of high strength nanocomposite Al-X-Zr (X = Si,Cu,Ni) alloys. Mater Sci Eng A 375-377 (2004) 1228-1234
16. 5 alloys. Mater Sci Eng A 363 (2003) 81-85
17. Chang I.T.H., and Botten R.R. Heat treatment of rapidly solidified Al-Ni-Mm alloys. Mater Sci Eng A 226-228 (1997) 183-186
18. McKay B.J., Cizek P., Schumacher P., and O'Reilly K.A.Q. Heterogeneous nucleation in an Al-Ni-Si alloy studied using a metallic glass technique. Mater Sci Eng A 304-306 (2001) 240-244
19. Sahoo K.L., Wollgarten M., Haug J., and Banhart J. Effect of La on the crystallization behavior of amorphous Al94-XNi6LaX (x = 4-7) alloys. Acta Mater 53 (2005) 3861-3870
20. Man H.C., Zhang S., and Cheng F.T. Improving the wear resistance of AA 6061 by laser surface alloying with NiTi. Mater Lett 61 (2007) 4058-4061
21. Audebert F., Mendive C., and Vidal A. Structure and mechanical behaviour of Al-Fe-X and Al-Ni-X rapidly solidified alloys. Mater Sci Eng A 375-377 (2004) 1196-1200
22. Lee Ha Yong, Jung Se Hun, Lee Soo Yong, and Ko. Fabrication of cold sprayed Al-intermetallic compounds coatings by post annealing. Mater Sci Eng A 433 (2006) 139-143
23. Lee Ha Yong, Jung Se Hun, Lee Soo Yong, and Ko Kyung Hyun. Alloying of cold-sprayed Al-Ni composite coatings by post-annealing. Appl Sur Sci 253 (2007) 3496-3502
24. 1 (M = Mn or Fe) amorphous alloys containing finely dispersed fcc-Al particles. Mater Trans JIM 31 (1990) 747
25. Zhong Z.C., Jiang X.Y., and Greer A.L. Microstructure and hardening of Al-based nanophase composites. Mater Sci Eng A 226-228 (1997) 531-535
26. Gloriant T., and Greer A.L. Al-based nanocrystalline composites by rapid solidification of Al-Ni-Sm alloys. Nanostruc Mater 10 (1998) 389
27. Audebert F., Vazquez S., Gutierrez A., Vergara I., Alvarez G., Garcia Escortal A., et al. Mechanical and corrosion behaviour of Al-Fe-Nb amorphous alloys. Mater Sci Forum 269-272 (1998) 837-842
28. Inoue A. Fabrication and novel properties of nanostructured Al base alloys. Mater Sci Eng A 179-180 (1994) 57-61
29. Ammar H.R., Moreau C., Samuel A.M., Samuel F.H., and Doty H.W. Influences of alloying elements, solution treatment time and quenching media on quality indices of 413-type Al-Si casting alloys. Mater Sci Eng A 489 (2008) 426-438
30. Rajabi M., Simchi A., Vahidi M., and Davami P. Effect of particle size on the microstructure of rapidly solidified Al-20Si-5Fe-2X (X = Cu, Ni, Cr) powder. J Alloys Compd 466 (2008) 111-118
31. Rooy E.L. Metals Handbook vol. 15 (1988), ASM International, Materials Park, Ohio
32. Spinelli J.E., Rosa D.M., Ferreira I.L., and Garcia A. The effect of melt temperature profile on the transient metal/mold heat transfer coefficient during solidification. Mater Sci Eng, A Struct. Mater: Prop Microstruct Process 408 (2004) 317-325
33. Osorio W.R., Spinelli J.E., Ferreira I.L., and Garcia A. The roles of macrosegregation and of dendritic array spacings on the electrochemical behavior of an Al-4.5 wt.% Cu alloy. Electrochim. Acta 52 (2007) 3265-3273
34. Takeda M., Maeda Y., Yoshida A., Yabuta K., Konuma S., and Endo T. Discontinuity of G.P.(I) zone and θ-phase in an Al-Cu alloy. Scripta Mater 41 (1999) 643-649
35. Powder Diffraction Files-2 (ICDD PDF-2, Release 2000).
36. Vojtech D., Saksl K., Verner J., and Bartova B. Structural evolution of rapidly solidified Al-Mn and Al-Mn-Sr alloys. Mater Sci Eng A Struct Mater Prop microstruct Process 428 (2006) 188-195
37. Archibald L.C. In: Brandes E.A. (Ed). Smithells Metals Reference Book. 6th ed. vol. 32 (1983), Butterworths, London 2
38. Karaköse E., Karaaslan T., Keskin M., and Uzun O. Microstructural evolution and microhardness of a melt-spun Al-6Ni-2Cu-1Si (in wt.%) alloy. J Mater Process Technol 195 (2008) 58-62
39. Clavaguera-Mora M.T., Rodriguez-Viejo J., Jacovkis D., Touron J.L., Clavaguera N., and Howells W.S. Neutron diffraction and calorimetric study on Al-based metallic glasses. J Non-Cryst Solids 287 (2001) 162-166
40. S.P. Midson, Formation and decomposition of solid solutions extended by rapid solidification, Ph.D. Thesis, The University of Sheffield, Sheffield, UK, 1982.
41. Lutfi M., Unlu N.P., Eruslu N., and Genc E. Characterization investigations of a melt-spun ternary Al-8Si-5.1Cu (in wt.%) alloy. Mater Lett 57 (2003) 3296-3301
42. Karaköse E., and Keskin M. Effect of solidification rate on the microstructure and microhardness of a melt-spun Al-8Si-1Sb alloy. J Alloys Compd 466 (2009) 111-118
43. Zupanic F, Boncina T, Sustarsic B, Anzel I, Markoli B. Microstructure of Al-Mn-Be melt-spun ribbons. 2008;59:1245-1251.