Characterization investigations of a melt-spun ternary Al-8Si-5.1Cu (in wt.%) alloy

Materials Letters

Volumn 57, Issue 21, 2003, Pages 3296-3301

  Öveçoglu, M Lütfi ^a   Ünlü, Necip ^a   Eruslu, Niyazi ^a   Genç, Arda ^a  

^a ISTANBUL TECHNICAL UNIVERSITY   (Turkey)

Author keywords

Alloys; Characterisation methods; Melt spinning; Metals; Microstructure; Solidification; Ternary Al Si Cu alloy

Indexed keywords

MELT SPINNING; QUENCHING; SCANNING ELECTRON MICROSCOPY; SILICON; SOLUBILITY; TERNARY SYSTEMS; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION ANALYSIS;

TERNARY ALLOYS;

ALUMINUM ALLOYS;

EID: 18844471012     PISSN: 0167577X     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0167-577X(03)00051-X     Document Type: Article

References (37)

1. Dom F.J. Meltspun aluminium successful in racing pistons. Aluminium. 70(9/10):1994;575-578.
2. Liebermann H.H. Rapidly solidified alloys made by chill block melt-spinning processes. Journal of Crystal Growth. 70:1984;497-506.
3. Froes F.H., Kim Y.-W., Hehmann F. Rapid solidification of Al, Mg, and Ti. Journal of Metals. 8:1987;14-21.
4. Taub A.I. Mechanical properties and potential applications of rapidly solidified alloys. Steeb S., Warlimont H. Rapidly Quenched Metals. 1985;1611-1618 Elsevier Science, Amsterdam.
5. Froes F.H., Ward-Close C.H., Taylor P.R., Baeslack W.A. Powder metallurgy of light alloys for aerospace and demanding applications - a review. Froes F.H. P/M in Aerospace, Defense and Demanding Applications - 1995. 1995;3-39 Metal Powder Industries Federation, Princeton, NJ.
6. Beaumont F.V. Aluminum P/M: past, present and future. The International Journal of Powder Metallurgy. 36(6):2000;41-43.
7. Samuel F.H. Metallurgical Transactions. 17A:1986;127.
8. Samuel F.H., Champier G. Journal of Materials Science. 23:1988;541.
9. Hunt W.H. Jr. New directions in aluminum-based P/M materials for automotive applications. The International Journal of Powder Metallurgy. 36(6):2000;51-60.
10. Van Mourik P., Mittemeijer E.J., De Keijser Th.H. On precipitation in rapidly solidified aluminium-silicon alloys. Journal of Materials Science. 18:1983;2706-2720.
11. Delhez R., De Keijser Th.H., Mittemeijer E.J., Van Mourik P., Van Der Pers N.M., Katgerman L., Zalm N.E. Structural inhomogeneities of AlSi alloys rapidly quenched from the melt. Journal of Materials Science. 17:1982;2887-2894.
12. Ichinose H., Ino H. Lattice imaging analysis and Mössbauer spectroscopy of liquid-quenched Al-Fe alloy. Steeb S., Warlimont H. Rapidly Quenched Metals. 1985;933-936.
13. Bose S.K., Kumar R. Structure of rapidly solidified aluminium-silicon alloys. Journal of Materials Science. 8:1973;1795-1799.
14. Van Rooyen M., Van Der Pers N.M., Katgerman L., De Keijser Th.H., Mittemeijer E.J. Relation between solidification morphology and texture of melt-spun Al and Al-alloys. Steeb S., Warlimont H. Rapidly Quenched Metals. 1985;823-826.
15. Delhez R., Katgerman L., De Keijser Th., Mittemeijer E.J., Van Mourik P., Van Der Pers N.M., Van Rooijen M., Zalm W.E. Al-Si alloys rapidly quenched from the melt. MPR. 8:1983;450-451.
16. Bendijk A., Delhez R., Katgerman L., De Keijser Th., Mittemeijer E.J., Van Der Pers N.M. Characterization of Al-Si alloys rapidly quenched from the melt. Journal of Materials Science. 15:1980;2803-2810.
17. Paidassi S., Chevrier J. Structure, mechanical and electrical properties of rapidly quenched Al-Si alloys. Steeb S., Warlimont H. Rapidly Quenched Metals. 1985;957-960.
18. Kim H.S. Yield and compaction behavior of rapidly solidified Al-Si alloy powders. Materials Science and Engineering A. 251:1998;100-105.
19. Van Der Hoeven J.A., Van Mourik P., Mittemeijer E.J. Structural and compositional variations in aluminium alloys rapidly quenched from the melt. Journal of Materials Science Letters. 2:1983;158-160.
20. Birol Y. Microstructural characterization of a rapidly solidified Al-12 wt.% Si alloy. Journal of Materials Science. 31:1996;2139-2143.
21. Shih J., Wu J., Lavernia E.J. Coarsening behavior of primary Si in melt-spun Al-22 wt.%Si. Scripta Metallurgica et Materialia. 29:1993;31-36.
22. Thursfield G., Stowell M.J. Mechanical properties of Al-8 wt.%Fe-based alloys prepared by rapid quenching from the liquid state. Journal of Materials Science. 9:1974;1644-1660.
23. Apaydin N. Microstructure characterization of rapidly solidified Al-Si alloys. Materials Science and Engineering. 98/2:1988;149-152.
24. Dubé D., Adnot A., Angers R. Journal of Materials Science. 32:1997;3587-3593.
25. Ünlü N., Genç A., Öveçoglu M.L., Eruslu N., Froes F.H. Characterization investigations of melt-spun ternary Al-xSi-3.3Fe (x=10, 20 wt.%) alloys. Journal of Alloys and Compounds. 322:2001;249-256.
26. Ünlü N., Genç A., Öveçoglu M.L., Lavernia E.J., Froes F.H. Microstructural evolution during annealing of the melt-spun ternary hypoeutectic Al-7.6Si-3.3Fe (in wt.%) alloy. Journal of Alloys and Compounds. 343:2002;223-233.
27. Zhou J., Duszczyk J., Korevaar B.M. Structural development during the extrusion of rapidly solidified Al-20Si-5Fe-3Cu-1Mg alloy. Journal of Materials Science. 26:1991;824-834.
28. Hirano T. Properties of Al-Si-X P/M alloys featuring use of rapidly solidified powders. Bando Y., Kosuge K. 1993 Powder Metallurgy World Congress, Kyote Int. Conf. Hall, Japan. 1993;563-566.
29. Hirano T., Ohmi F., Kiyoto F., Fujita T. Development of Al-Si-X P/M alloys using rapidly solidified powders. Lee P.W., Carbonara R.S. Rapidly Solidified Materials Proceedings of on Int. Conf. San Diego, California, USA. 1985;327-339.
30. Sater J.M., Sanders T.H., Garrett R.K. Characterization of rapidly solidified materials. Fine M.E., Starke E.A. Rapidly Solidified Powder Aluminium Alloys Symposium, April 4-5. 1984;83-117.
31. Estrada J.L., Duszczyk J. Journal of Materials Science. 25:1990;1381-1391.
32. Van Rooyen M., Van Der Pers N.M., De Keijser Th.H., Mittemeijer E.J. Structure refinement and improved mechanical properties of Al-20 wt.%Si by rapid solidification in conjunction with strontium modification. Materials Science and Engineering. 96:1987;17-25.
33. Itagaki M., Giessen B.C., Grant N.J. Supersaturation in rapidly quenched Al-rich Al-Si alloys. Transactions of the ASM. 61:1968;330-335.
34. Katgerman L. Microsegregation and extended solid solutions after rapid solidification of aluminium alloys. Scripta Metallurgica. 17:1983;537-540.
35. Timmermans G., Froyen L. Calculation of the effect of alloy characteristics on the permanent expansion of cold compacted hypereutectic Al-Si-Fe-X powder after thermal treatment. Scripta Materialia. 40/6:1999;743-750.
36. Todes P.C., Champier G., Samuel F.J. Production of Al-(12-25) wt.%Si alloys by rapid solidification: melt-spinning versus centrifugal atomization. Journal of Materials Science. 27:1992;3539-3551.
37. Matyja H., Giessen B.C., Grant N.J. The effect of cooling rate on the dendrite spacing in splat-cooled aluminium alloys. Journal of the Institute of Metals. 96:1968;30-32.