Mixing and matching in ceramic-on-metal hip arthroplasty: An in-vitro hip simulator study

Journal of Biomechanics

Volumn 42, Issue 15, 2009, Pages 2439-2446

  Affatato, Saverio ^a   Spinelli, Michele ^a   Squarzoni, Stefano ^b   Traina, Francesco ^a   Toni, Aldo ^a  

^a RIZZOLI ORTHOPAEDIC INSTITUTE   (Italy)

^b CNR   (Italy)

Author keywords

Ceramic on metal; COC; COM; Hip wear rate; Roundness measurements; SEM

Indexed keywords

CERAMIC-ON-METAL; COC; COM; HIP WEAR RATE; ROUNDNESS MEASUREMENTS; SEM;

ALUMINA; CARBIDES; DEBRIS; HIP PROSTHESES; METAL RECOVERY; METALS; ROUGHNESS MEASUREMENT; STANDARDS; WEAR OF MATERIALS; WEAR RESISTANCE;

CERAMIC MATERIALS;

ARTICLE; BIOMECHANICS; CERAMIC PROSTHESIS; CONTROLLED STUDY; GEOMETRY; HIP ARTHROPLASTY; IN VITRO STUDY; MECHANICAL STRESS; METAL IMPLANTATION; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; SIMULATION; WEIGHT REDUCTION;

CERAMICS; EQUIPMENT FAILURE ANALYSIS; HIP PROSTHESIS; HUMANS; METALS;

EID: 70350430031     PISSN: 00219290     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jbiomech.2009.07.031     Document Type: Article

References (55)

1. 2 fraction on the wear of ceramic on ceramic joints. Biomaterials 20 (1999) 1925-1929
2. 2 fraction on the wear of ceramic on ceramic hip joint prostheses. A long-term in vitro study. Biomaterials 22 (2001) 717-723
3. Affatato S., Leardini W., Jedenmalm A., Ruggeri O., and Toni A. Larger diameter bearings reduce wear in metal-on-metal hip implants. Clin. Orthop. Relat. Res. 456 (2007) 153-158
4. Affatato S., Zavalloni M., Taddei P., Di Foggia M., Fagnano C., and Viceconti M. Comparative study on the wear behaviour of different conventional and cross-linked polyethylenes for total hip replacement. Tribol. Int. 41 (2008) 813-822
5. Archard J.F. Contact and Rubbing of Flat Surfaces. J. Appl. Phys. 24 (1953) 981
6. Armitage P., and Berry G. Kolmogorov-Smirnov test. Statistical Methods in Medical Research (1994), Blackwell Scientific publications, Oxford 397-399
7. Barnes C.L., DeBoer D., Corpe R.S., Nambu S., Carroll M., and Timmerman I. Wear performance of large-diameter differential-hardness hip bearings. J. Arthroplasty 23 (2008) 56-60
8. Brockett C., Williams S., Jin Z., Isaac G., and Fisher J. Friction of total hip replacements with different bearings and loading conditions. J. Biomed. Mater. Res. B Appl. Biomater. 81 (2007) 508-515
9. Brockett C.L., Harper P., Williams S., Isaac G.H., Dwyer-Joyce R.S., Jin Z., and Fisher J. The influence of clearance on friction, lubrication and squeaking in large diameter metal-on-metal hip replacements. J. Mater. Sci. Mater. Med. 19 (2008) 1575-1579
10. Brown S.S., and Clarke I.C. A review of lubricant conditions for wear simulation in artificial hip joint replacements. Tribol. Trans. 49 (2006) 72-78
11. Case P. Accumulation of wear debris in the human body. In: Rieker C., Windler M., and Wyss U. (Eds). Metasul-a Metal-on-Metal Bearign (1999), Huber, H. 133-148
12. Costa H.L., Pandolfelli V.C., and Biasoli de Mello J.D. On the abrasive wear of zirconias. Wear 203-204 (1997) 626-636
13. Dahm K.L., Anderson I.A., and Dearnley P.A. Hard coatings for orthopedic implants. Surf. Eng. 11 (1995) 145-169
14. Damie F., and Favard L. Metal serum levels in 48 patients bearing a chromium-cobalt total hip arthroplasty with a metal-on-polyethylene combination. Rev. Chir. Orthop. Reparatrice Appar. Mo. 90 (2004) 241-248
15. Darring, B., 2007. British National Joint Registry Annual Report 2005-2006.
16. Davies A., Willert H., Campbell P., and Case P. Metal-on-metal bearing surfaces may lead to higher inflammation. J. Bone Joint Surg. Am. 86A (2004) 1947-1954
17. Dobbs H.S., and Minski M.J. Metal ion release after total hip replacement. Biomaterials 1 (1980) 193-198
18. Doorn P.F., Campbell P., and Amstutz H.C. Particle disease in metal-on-metal total hip replacements. In: Rieker C., Windler M., and Wyss U. (Eds). Metasul-a Metal-on-Metal Bearign (1999), Huber, H. 113-119
19. Dowson D., Hardaker C., Flett M., and Isaac G. A hip joint simulator study of the performance of metal-on-metal joints: Part II: design. J. Arthroplasty 19 (2004) 124-130
20. Duijsens A.W., Keizer S., Vliet-Vlieland T., and Nelissen R.G. Resurfacing hip prostheses revisited: failure analysis during a 16-year follow-up. Int. Orthop. 29 (2005) 224-228
21. Figueiredo-Pina C.G., Yan Y., Neville A., and Fisher J. Understanding the differences between the wear of metal-on-metal and ceramic-on-metal total hip replacements. Proc. Inst. Mech. Eng., Part H 222 (2008) 285-296
22. Firkins P.J., Tipper J.L., Ingham E., Stone M.H., Farrar R., and Fisher J. A novel low wearing differential hardness, ceramic-on-metal hip joint prosthesis. J. Biomech. 34 (2001) 1291-1298
23. Firkins P.J., Tipper J.L., Saadatzadeh M.R., Ingham E., Stone M.H., Farrar R., and Fisher J. Quantitative analysis of wear and wear debris from metal-on-metal hip prostheses tested in a physiological hip joint simulator. Bio.Med. Mat. Eng. 11 (2001) 143-157
24. Fisher J., Ingham E., Stone M.H., Wroblewski B.M., Besong A.A., Tipper J., Firkins P., Minakawa H., Matthews J.B., and Green T. Wear particle morphologies in artificial hip joints: particle size is critical in the response of macrophages. In: Rieker C., Windler M., and Wyss U. (Eds). Metasul-a Metal-on-Metal Bearign (1999), Huber, H. 121-124
25. Fisher J., Hu X.Q., Stewart T.D., Williams S., Tipper J.L., Ingham E., Stone M.H., Davies C., Hatto P., Bolton J., Riley M., Hardaker C., Isaac G.H., and Berry G. Wear of surface engineered metal-on-metal hip prostheses. J. Mater. Sci. Mater. Med. 15 (2004) 225-235
26. Fisher J., Jin Z., Tipper J., Stone M., and Ingham E. Presidential Guest Lecture-tribology of alternative bearings. Clin. Orthop. Relat. Res. 453 (2006) 25-34
27. Ito H., Minami A., Matsuno T., Tanino H., Yuhta T., and Nishimura I. The sphericity of the bearing surface in total hip arthroplasty. J. Arthroplasty 16 (2001) 1024-1029
28. Kosashvili Y., Backstein D., Safir O., Ran Y., Loebenberg M.I., and Ziv Y.B. Hemiarthroplasty of the hip for fracture-what is the appropriate sized femoral head?. Injury 39 (2008) 232-237
29. Kumar P., Oka M., Ukeuchi K., and Shimizu K. Low wear rate of Uhmwpe aginst Zirconia ceramic (Y-Psz) in comparison to alumina ceramic and Sus 316 alloy. J. Biomed. Mater. Res. 25 (1991) 813-828
30. Lidgren, L., Robertsson, O., 2007. The Swedish Knee Arthroplasty Register.
31. Mabuchi K., Sakai R., Ota M., and Ujihira M. Appropriate radial clearance of ceramic-on-ceramic total hip prostheses to realize squeeze-film lubrication. Clin. Biomech. (Bristol, Avon) 19 (2004) 362-369
32. Macchi, F., Willman, G., 2001. Allumina Biolox forte: evoluzione, stato dell'arte e affidabilità. 15, 99-106.
33. Maloney W.J., Smith R.L., Castro F., and Schurman D.J. Fibroblast response to metallic debris in vitro. Enzyme induction cell proliferation and toxicity. J. Bone Joint Surg. Am. 75A (1993) 835-844
34. Marker, M., Grübl, A., O., R., Heinze, G., Pohanka, E., Kotz, R., 2008. Metal-on-metal hip implants: do they impair renal function in the long-term? A 10-year follow-up study. Arch. Orthop. Trauma Surg. DOI 10.1007/s00402-00007-00466-00409.
35. McKellop, H., Lu, B., Benya, P., Friction, lubrication and wear of cobalt-chromium, alumina and zirconia hip prostheses compared on a joint simulator. February 17-20 of Conference, 38th Annual Meeting, Orthopaedic Research Society, Washington, DC, February 17-20.
36. Miki M., Sugano N., Yamamura M., Nakamura N., Nishii T., and Yoshikawa H. Serious metallosis of a metal head due to fragmented ceramic screws in a cemented THA. Arch. Orthop. Trauma. Surg. (2006) 192-196
37. Morlock M., Nassutt R., Janssen R., Willmann G., and Honl M. Mismatched wear couple zirconium oxide and aluminum oxide in total hip arthroplasty. J. Arthroplasty 16 (2001) 1071-1074
38. Nizard R., Pourreyron D., Raould A., Hannouche D., and Sedel L. Alumina-on-alumina hip arthroplasty in patients younger than 30 years old. Clin. Orthop. Relat. Res. 466 (2008) 317-323
39. Rose R.M., Nusbaum H.J., Schneider H., Ries M., Paul I., Crugnola A., Simon S.R., and Radin E.L. On the true wear rate of ultra high-molecular-weight polyethylene in the total hip prosthesis. J. Bone Jt. Surg. Am. 62 (1980) 537-549
40. Sargeant A., and Goswami T. Hip implants-Paper VI-Ion concentrations. Mater. Des. 28 (2007) 155-171
41. Sauvé P., Mountney J., Khan T., De Beer J., Higgins B., and Grover B. Metal ion levels after metal-on-metal ring total hip replacement. J. Bone Jt. Surg. [Br.] 89-B (2007) 586-590
42. Savarino L., Padovani G., Ferretti M., Greco M., Cenni E., Perrone G., Greco F., Baldini N., and Giunti A. Serum ion levels after ceramic-on-ceramic and metal-on-metal total hip arthroplasty: 8-year minimum follow-up. J. Orthop. Res. 16 (2008) IN-PRESS
43. Scott, R.A., Schroeder, D., 1997. The effect of radius mismath on the wear of metal hip prosthesis. A hip simulator study. The 43th annual meeting, Orthopaedic Research Society, San Francisco.
44. Silva M., Heisel C., and Schmalzried T. Metal-on-metal total hip replacement. Clin. Orthop. Rel. Res. 430 (2005) 53-61
45. Stea, S., Bordini, B., De Clerico, M., Petropulacos, K., Toni, A., 2009. First hip arthroplasty register in Italy: 55,000 cases and 7 year follow-up. Int.Orthop. (SICOT) 33, 339-346.
46. Steens W., von Foerster G., and Katzer A. Severe cobalt poisoning with loss of sight after ceramic-metal pairing in a hip-a case report. Acta Orthop. 77 (2006) 830-832
47. Stiehl J.B., and Mahfouz M.R. Catastrophic failure of a modular revision total hip polyethylene insert. J. Arthroplasty 22 (2007) 143-147
48. Toni A., Traina F., Stea S., Sudanese A., Visentin M., Bordini B., and Squarzoni S. Early diagnosis of ceramic liner fracture. Guidelines based on a twelve-year clinical experience. J. Bone Jt. Surg. Am. 88 (2006) 55-63
49. Valenti J.R., Del Rio J., and Amillo S. Catastrophic wear in a metal-on-ceramic total hip arthroplasty. J. Arthroplasty 22 (2007) 920-922
50. Williams S., Schepers A., Isaac G., Hardaker C., Ingham E., van der Jagt D., Breckon A., and Fisher J. The 2007 Otto Aufranc Award. Ceramic-on-metal hip arthroplasties: a comparative in vitro and in vivo study. Clin. Orthop. Relat. Res. 465 (2007) 23-32
51. Williams, S., Graham, I., Ingham, E., Zhongmin, J., Fisher, J., 2008. Reducing the wear and ion levels of metal-on-metal hip replacements, AAOS 2008, San Francisco
52. Willmann G., Fruh H.J., and Pfaff H.G. Wear characteristics of sliding pairs of zirconia (Y-TZP) for hip endoprostheses. Biomaterials 17 22 (1996) 2157-2162
53. Willmann G. Ceramics for total hip replacement-what a surgeon should know. Orthopedics 21 2 (1998) 173-177
54. Willmann G. The evolution of ceramics in total hip replacement. Hip Int. 10 (2000) 193-203
55. Willmann G. Ceramic femoral head retrieval data. Clin. Orthop. Relat. Res. 379 (2000) 22-28