Effective indenter radius and frame compliance in instrumented indentation testing using a spherical indenter

Journal of Materials Research

Volumn 24, Issue 9, 2009, Pages 2965-2973

  Kang, Seung Kyun ^a   Kim, Ju Young ^b   Kang, Ingeun ^a   Kwon, Dongil ^a  

^a Seoul National University   (South Korea)

^b California Institute of Technology   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONTACT DEPTH; EFFECTIVE INDENTER; HARDNESS AND ELASTIC MODULUS; INDENTATION DEPTH; INDENTERS; INSTRUMENTED INDENTATION TESTING; NOVEL METHODS; REPRESENTATIVE STRESS; SPHERICAL INDENTERS;

INDENTATION; SUGAR (SUCROSE);

VICKERS HARDNESS TESTING;

EID: 70350142767     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2009.0358     Document Type: Article

References (48)

1. S.I. Bulychev, V.P. Alekhin, M.K. Shorshorov, A.P. Temovskii, and G.D. Shnyrev. Determining Young's modulus from the indentor penetration diagram. Zavod. Lab. 41, 1137 (1975).
2. M.F. Doemer and W.D. Nix: A method for interpreting the data from depth-sensing indentation instruments. J. Mater. Res. 1, 601 (1986).
3. W.C. Oliver and G.M. Pharr: An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564 (1992).
4. A. Gouldstone, N. Chollacoop, M. Dao, J. Li, A.M. Minor, and Y.L. Shen: Indentation across size scales and disciplines: Recent developments in experimentation and modeling. Acta Mater. 55, 4015 (2007).
5. A.C. Fischer-Cripps: A review of analysis methods for sub-micron indentation testing. Vacuum 58,569 (2000).
6. N.K. Mukhopadhyay and P. Paufler: Micro- and nanoindentation techniques for mechanical characterisation of materials. Int. Mater. Rev. 51, 209 (2006).
7. J.S. Field and M.V. Swain: Determining the mechanical-properties of small volumes of material from submicrometer spherical indentations. J. Mater. Res. 10, 101 (1995).
8. C.A. Schuh: Nanoindentation studies of materials. Mater. Today 9, 32 (2006).
9. D. Tabor: Hardness of Metals (Clarendon Press, Oxford, 1951).
10. A. Bolshakov and G.M. Pharr: Influences of pileup on the measurement of mechanical properties by load and depth-sensing indentation techniques. J. Mater. Res. 13, 1049 (1998).
11. A.C. Fischer-Cripps: Nanoindentation (Springer, New York, 2002).
12. W.C. Oliver and G.M. Pharr Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. J. Mater. Res. 19, 3 (2004).
13. Y.T. Cheng and CM. Cheng: Scaling, dimensional analysis, and indentation measurements. Mater. Sci. Eng., R 44, 91 (2004).
14. J.Y. Kim, B.W. Lee, D.T. Read, and D. Kwon: Influence of tip bluntness on the size-dependent nanoindentation hardness. Scr. Mater. 52, 353 (2005).
15. J.Y. Kim, S.K. Kang, J.R. Greer, and D. Kwon: Evaluating plastic flow properties by characterizing indentation size effect using a sharp indenter. Acta Mater. 56, 3338 (2008).
16. J.Y. Kim, S.K. Kang, J.J. Lee, J.I. Jang, Y.H. Lee, and D. Kwon: Influence of surface-roughness on indentation size effect. Acta Mater. 55, 3555 (2007).
17. J.H. Ahn and D. Kwon: Derivation of plastic stress-strain relationship from ball indentations: Examination of strain definition and pileup effect. J. Mater. Res. 16, 3170 (2001).
18. S.H. Kim, B.W. Lee, Y. Choi, and D. Kwon: Quantitative determination of contact depth during spherical indentation of metallic materials: A FEM study. Mater. Sci. Eng., A 415, 59 (2006).
19. J.Y. Kim, K.W. Lee, J.S. Lee, and D. Kwon: Determination of tensile properties by instrumented indentation technique: Representative stress and strain approach. Surf. Coat. Technol. 201, 4278 (2006).
20. E.C. Jeon, J.Y. Kim, M.K. Baik, S.H. Kim, J.S. Park, and D. Kwon: Optimum definition of true strain beneath a spherical indenter for deriving indentation flow curves. Mater. Sci. Eng., A 419, 196 (2006).
21. B. Taljat, T. Zacharia, and F. Kosel: New analytical procedure to determine stress-strain curve from spherical indentation data. Int. J. Solids Struct. 35, 4411 (1998).
22. M. Dao, N. Chollacoop, K.J. Van Vliet, T.A. Venkatesh, and S. Suresh: Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater. 49, 3899 (2001).
23. N. Chollacoop, M. Dao, and S. Suresh: Depth-sensing instrumented indentation with dual sharp indenters. Acta Mater. 51, 3713 (2003).
24. E.G. Herbert, G.M. Pharr, W.C. Oliver, B.N. Lucas, and J.L. Hay: On the measurement of stress-strain curves by spherical indentation. Thin Solid Films 398-399, 331 (2001).
25. S. Jayaraman, G.T. Hahn, W.C. Oliver, C.A. Rubin, and P.C. Bastias: Determination of monotonic stress-strain curve of hard materials from ultra-low-load indentation tests. Int. J. Solids Struct. 35, 365 (1998).
26. Y.T. Cheng and C.M. Cheng: Scaling relationships in conical indentation of elastic perfectly plastic solids. Int. J. Solids Struct. 36, 1231 (1999).
27. A.E. Giannakopoulos and S. Suresh: Theory of indentation of piezoelectric materials. Scr. Mater. 40, 1191 (1999)
28. T.A. Venkatesh, K.J. Van Vliet, A.E. Giannakopoulos, and S. Suresh: Determination of elasto-plastic properties by instrumented sharp indentation: Guidelines for property extraction. Scr. Mater. 42, 833 (2000).
29. J.L. Bucaiile, S. Stauss, E. Felder, and J. Michler: Determination of plastic properties of metals by instrumented indentation using different sharp indenters. Acta Mater. 51, 1663 (2003).
30. K.D. Bouzakis and N. Michailidis: Coating elastic-plastic properties determined by means of nanoindentations and FEM-supported evaluation algorithms. Thin Solid Films 469-470, 227 (2004).
31. S. Suresh and A.E. Giannakopoulos: A new method for estimating residual stresses by instrumented sharp indentation. Acta Mater. 465, 755 (1998).
32. Y.H. Lee and D. Kwon: Estimation of biaxial surface stress by instrumented indentation with sharp indenters. Acta Mater. 52, 1555 (2004).
33. Y.H. Lee, J.Y. Kim, J.S. Lee, K.H. Kim, J.Y. Koo, and D. Kwon: Using the instrumented indentation technique for stress characterization of friction stir-welded API X80 steel. Philos. Mag. 86, 5497 (2006).
34. J.S. Lee, J.I. Jang, B.W. Lee, Y. Choi, S.G. Lee, and D. Kwon: An instrumented indentation technique for estimating fracture toughness of ductile materials: A critical indentation energy model based on continuum damage mechanics. Acta Mater. 54, 1101 (2006).
35. B.R. Lawn and E.R. Fuller: Equilibrium penny-like cracks in indentation fracture. J. Mater. Sci. 10, 2016 (1975).
36. B.R. Lawn, A.G. Evans, and D.B. Marshall: Effect of residual contact stresses on mirror-flaw-size relations. J. Am. Ceram. Soc. 63, 574 (1980).
37. 37. T.S. Byun, J.W. Kim, and J.H. Hong: A theoretical model for determination of fracture toughness of reactor pressure-vessel steels in the transition region from automated ball indentation test. J. Nucl. Mater. 252, 187 (1998).
38. J.Y. Kim, S.H. Kim, J.S. Lee, K.W. Lee, and D. Kwon: Mechanical characterization of nano-structured materials using nanoin-dentation. Met. Mater. Int. 12, 219 (2006).
39. Y.G. Wei, X.Z. Wang, and M.H. Zhao: Size effect measurement and characterization in nanoindentation test. J. Mater. Res. 19, 208 (2004).
40. J.G. Swadener, E.P. George, and G.M. Pharr: The correlation of the indentation size effect measured with indenters of various shapes. J. Mech. Phys. Solids 50, 681 (2002).
41. K.L. Johnson: Contact Mechanics (Cambridge University Press, Cambridge, 1985).
42. Y.J. Park and G.M. Pharr: Nanoindentation with spherical indenters: Finite element studies of deformation in the elastic-plastic transition regime. Thin Solid Films 447-448, 246 (2004).
43. W.W. Gerberich, J.C. Nelson, E.T. Lilleodden, P. Anderson, and J.T. Wyrobek: Indentation induced dislocation nucleation: The initial yield point. Acta Mater. 44, 3585 (1996).
44. Y.L. Chiu and A.H.W. Ngan: A TEM investigation on indentation plastic zones in Ni3Al(Cr,B) single crystals. Acta Mater. 50, 1599 (2002).
45. H. Bei, E.P. George, J.L. Hay, and G.M. Pharr: Influence of indenter tip geometry on elastic deformation during nanoindentation. Phys. Rev. Lett. 95, 045501 (2005).
46. J. Alcalà, A.C. Barone, and M. Anglada: The influence of plastic hardening on surface deformation modes around Vickers and spherical indents. Acta Mater. 48, 3451 (2000).
47. M.A.G. Maneiro and J. Rodriguez: A new consideration on spherical depth-sensing indentation. J. Mater. Lett. 62, 69 (2008).
48. J. Rodríguez and M.A.G. Maneiro: A procedure to prevent pile up effects on the analysis of spherical indentation data in elastic-plastic materials. Mech. Mater. 39, 987 (2007).