Hybrid composite rods subjected to excessive bending loads

Composites Science and Technology

Volumn 69, Issue 15-16, 2009, Pages 2625-2632

  Burks, B M ^a   Armentrout, D L ^a   Baldwin, M ^a   Buckley, J ^a   Kumosa, M ^a  

^a University of Denver   (United States)

Author keywords

A. Hybrid composites; A. Polymer matrix composites; C. Finite element analysis; D. Acoustic emission; D. Scanning Electron Microscopy

Indexed keywords

A. HYBRID COMPOSITES; A. POLYMER MATRIX COMPOSITES; C. FINITE ELEMENT ANALYSIS; D. ACOUSTIC EMISSION; D. SCANNING ELECTRON MICROSCOPY;

ACOUSTIC EMISSION TESTING; ACOUSTIC EMISSIONS; ACOUSTICS; ALUMINA; ALUMINUM; BENDING (FORMING); CARBON FIBERS; COMPRESSION TESTING; COMPRESSIVE STRENGTH; ELECTRON EMISSION; FINITE ELEMENT METHOD; GLASS FIBERS; HYBRID MATERIALS; SANDWICH STRUCTURES; SCANNING; SCANNING ELECTRON MICROSCOPY; STRUCTURAL MEMBERS; WIRE;

POLYMER MATRIX COMPOSITES;

ACOUSTIC PROPERTY; BENDING; CARBON FIBER; COMPRESSIVE PROPERTY; FAILURE ANALYSIS; FINITE ELEMENT ANALYSIS; GLASS FIBER; STRESS;

EID: 70350061730     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2009.08.003     Document Type: Article

References (33)

1. Alawar A., Bosze E.J., and Nutt S.R. A composite core conductor for low sag at high temperatures. IEEE Trans Power Delivery 20 3 (2005) 2193-2199
2. Bosze EJ, Alawar A, Tsai YI, Nutt SR, Bryant D, Bowles G. Performance of a new overhead conductor design using a carbon/glass fiber composite core. In: International conference on overhead lines; March 2006. p. 121-35.
3. Bosze EJ, Tsai YI, Barjasteh E, Nutt SR, Bryant D. Long-term durability of the composite core conductor ACCC/TW. In: International conference on overhead lines; March 2008. p. 516-25.
4. Burks BM, Armentrout DL, Kumosa M. Failure prediction analysis of an ACCC conductor subjected to thermal and mechanical stresses. IEEE Trans Dielectr Electr Insul, in press.
5. Shokrieh M.M., and Omidi M.J. Reinforcement of metallic plates with composite materials. J Compos Mater 39 8 (2005) 723-744
6. Qiu Q., and Kumosa M. Corrosion of E-glass fibers in acidic environments. Compos Sci Technol 57 (1997) 497-507
7. Megel M., Kumosa L., Ely T., Armentrout D., and Kumosa M. Initiation of stress corrosion cracking in unidirectional glass/polymer composite materials. Compos Sci Technol 61 2 (2001) 231-246
8. Kumosa L., Armentrout D., and Kumosa M. An evaluation of the critical conditions for the initiation of stress corrosion cracking in unidirectional E-glass/polymer composites. Compos Sci Technol 61 4 (2001) 615-623
9. Kumosa L., Kumosa M., and Armentrout D. Resistance to stress corrosion cracking of unidirectional glass/polymer composites based on low and high seed ECR-glass fibers for high voltage composite insulator applications. Composites Part A 34 1 (2003) 1-15
10. Armentrout D., Kumosa M., and McQuarrie T. Boron free fibers for prevention of acid induced brittle fracture of composite insulator GRP rods. IEEE Trans Power Delivery 18 3 (2003) 684-693
11. Kumosa L., Kumosa M., and Armentrout D. Resistance to brittle fracture of glass reinforced polymer composites used in composite (non-ceramic) insulators. IEEE Trans Power Delivery 20 4 (2005) 2657-2666
12. Kumosa M., Shankara H., Narayan H., Qiu Q., and Bansal A. Brittle fracture of non-ceramic suspension insulators with epoxy cone end-fittings. Compos Sci Technol 57 (1997) 739-751
13. Kumosa M., Kumosa L., and Armentrout D. Causes and potential remedies of brittle fracture failures of composite (non-ceramic) insulators. IEEE Trans Dielectr Electr Insul 11 6 (2004) 1037-1048
14. Kumosa M., Kumosa L., and Armentrout D. Failure analyses of non-ceramic insulators: Part I - brittle fracture characteristics. IEEE Electr Insul Mag 21 3 (2005) 14-27
15. Kumosa M., Kumosa L., and Armentrout D. Failure analyses of non-ceramic insulators: Part II - the brittle fracture model and failure prevention. IEEE Electr Insul Mag 21 4 (2005) 28-41
16. Norton R. Machine design an integrated approach. 3rd ed. (2006), Pearson Education Inc., Upper Saddle River (NJ) p. 327
17. Ashby M., and Jones D. Engineering materials 1 an introduction to properties, applications, and design. 3rd ed. (2005), Elsevier Ltd. p. 211
18. Shigley J., and Mitchell L. Mechanical engineering design. 4th ed. (1983), McGraw-Hill, New York (NY) p. 300
19. Kuguel R. A relation between theoretical stress-concentration factor and fatigue notch factor deduced from the concept of highly stressed volume. Proc ASTM 61 (1961) 732-748
20. Abaqus FEA, DS Simula. Dassault Systems 2004; 2007.
21. Eshelby J.D. The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc Roy Soc Lond A241 (1957) 376-396
22. Hull D., and Clyne T.W. An introduction to composite materials. 2nd ed. (1996), Cambridge University Press, New York (NY) p. 162-79
23. Mori T., and Tanaka K. Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall 21 (1973) 571-574
24. Mura T. Micromechanics of defects in solids. 2nd ed. (1987), Martinus Nijhoff, Dordecht
25. Rupnowski P. Stress and damage analyses of composites. PhD dissertation, University of Denver, Department of Mechanical and Materials Engineering; 2005.
26. Toray Technical Data Sheet, "T700S Data Sheet," © Torayca, Santa Ana, CA.
27. ASTM Annual Book of Standards. ASTM D695-02a, Standard test method for compressive properties of rigid plastics; 2002.
28. Barbero E.J., Makkapati S., and Tomblin J.S. Experimental determination of the compressive strength of pultruded structural shapes. Compos Sci Technol 59 (1999) 2047-2054
29. Wisnom M.R. Size effects in the testing of fibre-composite materials. Compos Sci Technol 59 (1999) 1937-1957
30. Lee S.H., and Waas A.M. Compressive response and failure of fiber reinforced unidirectional composites. Int J Fract 100 (1999) 275-306
31. Awerbuch J., Gorman J.R., and Madhukar M. Monitoring acoustic-emission during quasi-static loading-unloading cycles of filament-wound graphite-epoxy laminate coupons. Mater Eval 43 (1985) 754-764
32. Bosze E, Alawar A, Nutt S. Flexure and shear strength of drake size composite rods, CTC Memo; August 2004.
33. Burks B. Short-term failure analysis of aluminum conducting composite core transmission lines. MSME thesis, University of Denver; August 2009.