Damage characterisation of glass/textile fabric polymer hybrid composites in sea water environment

Materials and Design

Volumn 31, Issue 2, 2010, Pages 930-939

  Arun, K V ^a   Basavarajappa, S ^a   Sherigara, B S ^b  

^a UNIVERSITY B D T COLLEGE OF ENGINEERING   (India)

^b KUVEMPU UNIVERSITY   (India)

Author keywords

Critical stress intensity factor; Damage characterisation; Hybrid composites; Impact toughness; Interlaminar shear strength; Sea water environment

Indexed keywords

CRITICAL STRESS INTENSITY FACTOR; DAMAGE CHARACTERISATION; HYBRID COMPOSITES; IMPACT TOUGHNESS; INTERLAMINAR SHEAR STRENGTH; SEA WATER ENVIRONMENT;

ASPHALT PAVEMENTS; FABRICS; HYBRID MATERIALS; IMPACT STRENGTH; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; SEAWATER; SPECIMEN PREPARATION; STRESS INTENSITY FACTORS; WATER ANALYSIS;

SHEAR STRENGTH;

EID: 70350044861     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.07.029     Document Type: Article

References (39)

1. Buehler F.U., and Seferis J.C. Effect of reinforcement and solvent content on moisture absorption in epoxy composite materials. Composites Part A 31 (2000) 741-748
2. Kootsookos A., and Mouritz. Sea water durability of glass and carbon-polymer composites. Compos Sci Technol 64 (2004) 1503-1511
3. Smith C.S. Design of marine structures in composite materials (1990), Elsevier, London
4. Sreekala M.S., George J., Kumaran M.G., and Thomas S. The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibers. CST 62 (2002) 339-353
5. Zweben C. Tensile strength of hybrid composites. J Mater Sci 12 (1977) 1325-1337
6. Clark R.A., and Ansell M.P. Jute and glass fibre hybrid laminates. J Mater Sci 21 (1986) 269-276
7. Mishra S., Mohanty A.K., Drzal L.T., Misra M., Parija S., Nayak S.K., et al. Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites. CST 63 (2003) 1377-1385
8. Adams D.F., and Zimmerman R.S. Static and impact performance of polyethylene fiber/graphite hybrid composites. SAMPE J. 22 (1989) 10-16
9. Jang B.Z., Chen L.C., Wang C.Z., Lin H.T., and Zee R.H. Impact resistance and energy absorption mechanism in hybrid composites. Compos Sci Technol 34 (1989) 305-335
10. Lee Y.-S., Kang K.H., and Park O. Response of hybrid laminated composite plates under low-velocity impact. Compos Struct 65 (1997) 956-974
11. Boisse P. Experimental analysis and modeling of biaxial mechanical behavior of woven composite reinforcements. Exp Mech 41 (2001) 260-269
12. Morgan R., and O'Neal J. The durability of epoxies. Polym-Plast Technol Eng 10 1 (1978) 49-116
13. Springer G.S., and Hung C. Effects of moisture and temperature on the tensile strength of composite materials. J Compos Mater 11 (1977) 2-16
14. Adams D.F., and Miller A.K. Hydrothermal microstresses in a unidirectional composite exhibiting inelastic material behavior. J Compos Mater 11 (1977) 285-299
15. Parhizgar S., Zachary L.W., and Sun C.T. Application of the principles of linear fracture mechanics to the composite materials. Int J Fract 20 (1982) 3-15
16. Konish H.J., Swedlow J.L., and Cruse T.A. Experimental investigation of fracture in an advanced ber composite. J Compos Mater 6 (1972) 114-124
17. Waddoups E.M., Eisenmann J.R., and Kaminiski B.E. Macroscopic fracture mechanics of advanced composite materials. J Compos Mater 5 (1971) 446
18. Haj-Ali R.M., and El-Hajjar R.F. Crack propagation analysis of mode-I fracture in pultruded composites using micromechanical constitutive models. Mech Mater 35 9 (2003) 885-902
19. El-Hajjar R., and Haj-Ali R. Mode-I fracture toughness testing of thick section frp composites using the ESE (T) specimen. Eng Fract Mech 72 (2005) 631-643
20. John R. Stress intensity factor and compliance solutions for an eccentrically loaded single edge notch geometry. Eng Fract Mech 58 (1997) 87-96
21. Tay T.E. Characterisation and analysis of delamination fracture in composites: an overview of developments from 1990 to 2001. Appl Mech Rev 56 1 (2003) 1-31
22. O'brien T.K. Interlaminar fracture toughness: the long and winding road to standardization. Composites Part B: Eng 29 1 (1998) 57-62
23. Davies P., Sims G.D., Blackman B.R.K., Brunner A.J., Kageyama K., Hojo M., et al. Comparison of test configurations for determination of mode ii interlaminar fracture toughness results from international collaborative test programme. Plast Rubber Compos 28 9 (1999) 432-437
24. Davies P., Blackman B.R.K., and Brunner A.J. Standard test methods for delamination resistance of composite materials: current status. Appl Compos Mater 5 6 (1998) 345-364
25. Abrate S. Impact on laminated composite materials. Appl Mech Rev 44 4 (1991) 155-190
26. Abrate S. Impact on laminate composites: recent advances. Appl Mech Rev 47 11 (1994) 517-544
27. Cantwell W.J., and Morton J. The impact resistance of composite materials-a review. Composites 22 5 (1991) 347-362
28. Richardson M.O.W., and Wisheart M.J. Review of low-velocity impact properties of composite materials. Composites: Part A 27A (1996) 1123-1131
29. Sun C.T., and Manoharan M.G. Growth of delamination cracks due to bending in a [905/05/905] laminate. Compos Sci Technol 34 (1989) 365-377
30. Choi H.Y., Wu H.-Y.T., and Chang F.-K. New approach toward understanding damage mechanisms and mechanics of laminated composites due to low-velocity impact: part II-analysis. J Compos Mater 25 (1991) 1012-1038
31. Choi H.Y., and Chang F.-K. A model for predicting damage in graphite/epoxy laminated composites resulting from low velocity point impact. J Compos Mater 26 14 (1992) 2134-2169
32. Schoeppner G.A., and Abrate S. Delamination threshold loads for low velocity impact on composite laminates. Composites: Part A 31 (2000) 903-915
33. Karbhari V.M., and Rydin R.W. Impact Characterisation of RTM composites-II: damage mechanisms and damage evolution in plain weaves. J Mater Sci 34 (1999) 5641-5648
34. Finn S.R., and Springer G.S. Delaminations in composite plates under transverse static or impact loads-a model. Compos Struct 23 (1993) 177-190
35. Aktas A., and Uzun I. Sea water effect on pinned-joint glass fibre composite materials. Compos Struct 85 (2008) 59-63
36. Gu H., and Hongxia S. Effect of water absorption on the mechanical properties of glass/polyester composites. Mater Des 28 (2007) 1647-1650
37. Olmos D., Lopez-Moron R., and Gonzalez-Benito J. The nature of the glass fibre surface and its effect in the water absorption of glass fibre/epoxy composites. The use of fluorescence to obtain information at the interface. Compos Sci Technol 66 (2006) 2758-2768
38. Rhee K.Y., Lee S.M., and Park S.J. Effect of hydrostatic pressure on the technical behavior of sea water-absorbed carbon/epoxy composite. Mater Sci Eng A 384 (2003) 308-313
39. Kokarakis J, Taylor R. Theoretical and experimental investigations of blistered fiberglass. In: Proceedings of the third international conference on marine application of composite materials, 19-21 March 1990. Melbourne (FL): Florida Institute of Technology; 1990.