Phase composition of alumina-mullite-zirconia refractory materials

Journal of the European Ceramic Society

Volumn 30, Issue 1, 2010, Pages 29-35

  Zanelli, C ^a   Dondi, M ^a   Raimondo, M ^a   Guarini, G ^a  

^a INSTITUTE OF SCIENCE AND TECHNOLOGY FOR CERAMICS   (Italy)

Author keywords

Al2O3 SiO2 ZrO2; Corundum; Glassy phase; Mullite; Refractory; XRD; Zirconia

Indexed keywords

AL2O3-SIO2-ZRO2; ALKALI CORROSION; ALKALINE COMPOUNDS; ALUMINA PARTICLES; CHEMICAL COMPOSITIONS; GLASSY PHASE; GLASSY PHASIS; HIGH MECHANICAL STRENGTH; HIGH TEMPERATURE; HIGH-TEMPERATURE REACTION; ORTHORHOMBIC UNIT CELL; REFRACTORY; RIETVELD; SINTERING TEMPERATURES; THERMAL SHOCK RESISTANCE; UNIT CELL PARAMETERS; VITREOUS PHASE; XRD; ZIRCONIA POLYMORPHS;

ALKALINITY; ALUMINOUS REFRACTORIES; ALUMINUM; CELL MEMBRANES; CORROSION; CORROSION RESISTANCE; CORUNDUM; DISSOLUTION; HEMATITE; HIGH TEMPERATURE APPLICATIONS; MULLITE; PARTICLE SIZE; PARTICLE SIZE ANALYSIS; PHASE COMPOSITION; RAW MATERIALS; SILICATE MINERALS; SILICON COMPOUNDS; SINTERED ALUMINA; SINTERING; SIZE DISTRIBUTION; STOICHIOMETRY; X RAY DIFFRACTION; X RAY DIFFRACTION ANALYSIS; ZIRCONIA; ZIRCONIUM ALLOYS;

ZIRCONIA REFRACTORIES;

EID: 70349770540     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2009.07.016     Document Type: Article

References (36)

1. Aksel C. Mechanical properties and thermal shock behaviour of alumina-mullite-zirconia and alumina-mullite refractory materials by slip casting. Ceram. Int. 29 (2003) 311-316
2. Sonntag U. Variety of ceramic roller materials: answer to increased requirements of new applications and developments. Interceram 50 (2001) 380-387
3. Bettges H. High-alumina rollers for rollers kilns. Interceram 39 (1990) 28-30
4. Sonntag U., Isenmann B., Knape G., Sussmuth M., and Habermann A. New roller concepts for extreme applications. Proc. Eng. 79 (2002) 22-26
5. Mazzei A.C., and Rodrigues J.A. Alumina-mullite-zirconia composites obtained by reaction sintering. Part I. Microstructure and mechanical behaviour. J. Mater. Sci. 35 (2000) 2807-2814
6. Mazzei A.C., and Rodrigues J.A. Alumina-mullite-zirconia composites obtained by reaction sintering. Part II. R-Curve behavior. J. Mater. Sci. 35 (2000) 2815-2824
7. Lee W.E., Argent B., and Zhang S. Complex phase equilibria in refractories design and use. J. Am. Ceram. Soc. 85 (2002) 2911-2918
8. Ebadzadeh T. Reaction sintering of multicomponent mixtures for producing ceramics containing zirconia. J. Eur. Ceram. Soc. 20 (2000) 725-729
9. Koyama T., Hayashi S., Yasumori A., Okada K., Schmucker M., and Schneider H. Microstructure and mechanical properties of mullite/zirconia composites prepared from alumina and zircon under various firing conditions. J. Eur. Ceram. Soc. 16 (1996) 231-237
10. Valle, M., Gandolfi, S., Dondi, M. and Fabbri, B., Effectiveness of various zirconium compounds in the body to improve the alkaline attack resistance of ceramic rollers. In Fourth Euro-Ceramics, vol. 13, 1995, pp. 131-136.
11. Aksel C. The influence of zircon on the mechanical properties and thermal shock behaviour of slip-cast alumina-mullite refractories. Mater. Lett. 57 (2002) 992-997
12. Aksel C. The role of fine alumina and mullute particles on the thermomechanical behaviour of alumina-mullite refractory materials. Mater. Lett. 57 (2002) 708-714
13. Aksel C., Dexet M., Logen N., Porte F., Riley F.L., and Konieczny F. The influence of zircon in a model aluminosilicate glass tank forehearth refractory. J. Eur. Ceram. Soc. 23 (2003) 2083-2088
14. Aksel C. The effect of mullite on the mechanical properties and thermal shock behaviour of alumina-mullite refractory materials. Ceram. Int. 29 (2003) 183-188
15. Valle, M., Gandolfi, S., Dondi, M. and Fabbri, B., Determination of thermal shock resistance in ceramic rollers. In Fourth Euro-Ceramics, vol. 3, 1995, pp. 465-470.
16. Başpinar M.S., Schulle W., and Kara F. Fundamental for optimization of binding for high refractory mullite products. Key Eng. Mater. 264-268 (2004) 1787-1790
17. Collini M., and Rowcliffe D. Analysis and prediction of thermal shock in brittle materials. Acta Mater. 48 (2000) 1655-1665
18. Wang G., and Krstic V. Roles of porosity, residual stresses and grain size in the fracture of brittle solids. Philos. Mag. A 78 5 (1998) 1125-1135
19. Aksel C. Mechanical properties of alumina-mullite-zircon refractories. Key Eng. Mater. 264-268 (2004) 1791-1794
20. Aksel C. The influence of fine alumina particles on the mechanical properties and thermal shock behaviour of slip-cast alumina-mullite refractories. Key Eng. Mater. 264-268 (2004) 1811-1814
21. Aksel C., Riley F.L., and Konieczny F. The corrosion resistance of alumina-mullite-zircon refractories in molten glass. Key Eng. Mater. 264-268 (2004) 1803-1806
22. Takatak S., Artir R., Yilmaz S., and Bindal C. Fracture toughness of alumina-mullite composites produced by infiltration process. Key Eng. Mater. 264-268 (2004) 981-984
23. Gualtieri A.F. Accuracy of XRPD QPA using the combined Rietveld-RIR method. J. Appl. Cryst. 33 (2000) 267-278
24. Larson, A. C. and Von Dreele, R. B., General structure analysis system (GSAS). In Los Alamos National Laboratory Report LAUR, 2000, pp. 86-748.
25. Toby B.H. EXPGUI, a graphical user interface for GSAS. J. Appl. Cryst. 34 (2001) 210-221
26. Ban T., and Okada K. Structure refinement of mullite by the Rietveld method and a new method for estimation of chemical composition. J. Am. Ceram. Soc. 75 (1992) 227-230
27. Oetzel M., and Heger G. Laboratory X-ray powder diffraction: a comparison of different geometries with special attention to the usage of the CuK alpha doublet. J. Appl. Cryst. 32 (1999) 799-807
28. Wang D., Guo Y., Liang K., and Tao K. Crystal structure of zirconia by Rietveld refinement. Sci. China 42 (1999) 80-86
29. SRM 674b, Standard Reference Materials. In X-Ray Powder Diffraction Intensity Set for Quantitative Analysis by X-Ray Powder Diffraction. National Institute of Standards & Technology, Gaithersburg, USA, 2005.
30. STATISTICA 7.1. StatSoft Italia s.r.l., 2005.
31. Madsen I.C., Finney R.J., Flann R.C.A., Frost M.T., and Wilson B.W. Quantitative analysis of high-alumina refractories using X-ray powder diffraction data and the Rietveld method. J. Am. Ceram. Soc. 74 (1991) 619-624
32. 3 system. J. Mater. Sci. 15 (1980) 114-118
33. Duran C., and Tur Y.K. Phase formation and texture development in mullite/zirconia composites fabricated by templated grain growth. J. Mater. Sci. 41 (2006) 3303-3313
34. 3 mixtures. Mater. Lett. 57 (2003) 1716-1722
35. Cameron W.E. Composition and cell dimension of mullite. Ceram. Bull. 56 (1977) 1003-1011
36. Aksel C. The microstructural features of an alumina-mullite-zirconia refractory material corroded by molten glass. Ceram. Int. 29 (2003) 305-309