Poly(methyl methacrylate)-modified epoxy/amine system for reactive rotational moulding: Crosslinking kinetics and rheological properties

Polymer International

Volumn 58, Issue 8, 2009, Pages 954-961

  Mounif, Eskandar ^a   Liang, Genhai G ^b   Cook, Wayne D ^b   Bellenger, Veronique ^a   Tcharkhatchi, Aabbas ^a  

^a CNRS   (France)

^b MONASH UNIVERSITY   (Australia)

Author keywords

Chemorheology; DETDA DGEBA; Epoxy amine resin; Phase separation; Reactive rotational moulding; Thermoplastic modified reactive system

Indexed keywords

ADDITIVITY RULES; AROMATIC DIAMINE; CHEMORHEOLOGY; CROSS-LINKED POLYMERS; CROSSLINKING KINETICS; DETDA/DGEBA; DIGLYCIDYL ETHER OF BISPHENOL-A; DILUTION EFFECT; DYNAMIC MECHANICAL THERMAL ANALYSIS; DYNAMIC PROPERTY; DYNAMIC RHEOLOGY; EPOXY/AMINE RESIN; GEL POINT; GLASS TRANSITION TEMPERATURE; LOW VISCOSITY; MATRIX; PROCESSING AIDS; PROCESSING WINDOWS; REACTIVE BLENDS; REACTIVE ROTATIONAL MOULDING; RHEOLOGICAL PROPERTY; ROTATIONAL MOULDING; SMALL REDUCTION; SOLUBILITY PARAMETERS; STEADY-SHEAR RHEOLOGY; THERMAL RESISTANCE; THERMOSETTING RESINS; UNCURED RESINS;

AMINES; BLENDING; CURING; DIFFERENTIAL SCANNING CALORIMETRY; DYNAMIC MECHANICAL ANALYSIS; ELASTICITY; ESTERS; ETHERS; GELATION; GELS; GLASS TRANSITION; INFRARED SPECTROSCOPY; MOLDING; PHASE MODULATION; PHENOLS; PLASTICITY; POLYMER BLENDS; PRESSURE CONTROL; REINFORCED PLASTICS; RESINS; RHEOLOGY; ROTATIONAL MOLDING; SPECTROSCOPIC ANALYSIS; THERMOANALYSIS; THERMOSETS; VISCOSITY;

PHASE SEPARATION;

AMINE; CROSS LINKING; EPOXY RESIN; GLASS TRANSITION TEMPERATURE; KINETICS; POLYMETHYL METHACRYLATE; RHEOLOGY; SHEAR PROPERTY; THERMOSETTING POLYMER; VISCOSITY;

EID: 70349508888     PISSN: 09598103     EISSN: 10970126     Source Type: Journal    
DOI: 10.1002/pi.2622     Document Type: Article

References (43)

1. Crawford RJ and Throne JL, Rotational Molding Technology. Plastics Design Library, Norwich, NY (2002).
2. Valles EM and Macosko CW, Macromolecules 12:521-526 (1979).
3. Rubinstein M and Colby RH, Polymer Physics. Oxford University Press, New York (2003).
4. Riew CK and Kinloch AJ (eds), Toughened Plastics I: Science and Engineering, Advances in Chemistry 233. American Chemical Society, Washington, DC (1993).
5. Atkins KE, in Sheet Moulding Compound Materials, Science and Technology, ed. by Kia H. Hanser, pp. 49-78 (1993).
6. Chanda M and Roy SK, Plastics Technology Handbook. CRC Press, Boca Raton, FL (2006).
7. Ritzenthaler S, Girard-Reydet E and Pascault JP, Polymer 41:6375-6386 (2000).
8. Olmos Dand González-Benito J, Colloid Polym Sci 284:654-667 (2006).
9. Zucchi IA, Galante MJ and Williams RJJ, Polymer 46:2603-2609 (2005).
10. Cabanelas JC, Serrano B and Baselga J, Macromolecules 38:961-970 (2005).
11. Rastegar S, Mohammadi N and Bagheri R, Colloid Polym Sci 283:145-153 (2004).
12. Ritzenthaler S, Court F, Girard-Reydet E, Leibler L and Pascault JP, Macromolecules 36:118-126 (2003).
13. Pena G, Eceiza A, Valea A, Remiro P, Oyanguren P and Mondragon I, Polym Int 52:1444-1453 (2003).
14. Nguyen-Thuc BH and Maazouz A, Polym Eng Sci 42:120-133 (2002).
15. Stefani PM, Riccardi CC, Remiro PM and Mondragon I, Polym Eng Sci 41:2013-2021 (2001).
16. Remiro PM, Marieta C, Riccardi CC and Mondragon I, Polymer 42:9909-9914 (2001).
17. Hsieh HK andWoo EM, J Polym Sci B: Polym Phys 34:2591-2598 (1996).
18. Gomez CM and Bucknall CB, Polymer 34:2111-2117 (1993).
19. Galante MJ, Oyanguren PA, Andromaque K, Frontini PM and Williams RJJ, Polym Int 48:642-648 (1999).
20. Van Der Sanden CM and Jansen BJP, PatentWO 97/46616, DSM N.V.
21. Mounif E, Bellenger V and Tcharkhtchi A, J Appl Polym Sci 108:2908-2916 (2008).
22. Liu H, Uhlherr A, Varley RJ and Bannister MK, J Polym Sci A: Polym Chem 42:3143-3156 (2004).
23. Chambon F and Winter HH, J Rheology 31:683 (1987).
24. Janarthanan V and Thyagarajan G, Polymer (Guildford) 33:3593-3597 (1992).
25. Brydson JA, Plastics Materials. Butterworth-Heinemann, Oxford (1999).
26. Fedors RF, Polym Eng Sci 14:147-154 (1974).
27. Olmos D and Gonzalez-Benito J, Eur Polym J 43:1487-1500 (2007).
28. Van Krevelen DW, Properties of Polymers, 3rd completely revised edition. Elsevier, Amsterdam (1990).
29. Kelley FN and Bueche F, J Polym Sci 50:549-556 (1961).
30. Couchman PR, Macromolecules 20:1712-1717 (1987).
31. Fox TG and Flory PJ, J Appl Phys 21:581 (1950).
32. Gordon M and Taylor JS, J Appl Chem 2:493-500 (1952).
33. Utracki LA, Polymer Alloys and Blends: Thermodynamics and Rheology. Hanser, New York (1990).
34. Liang GG, Cook WD, Sautereau H and Tcharkhtchi A, Polymer 50:2635-2642 (2009).
35. Wise CW, Cook WD and Goodwin AA, Polymer 38:3251-3261 (1997).
36. Dean K, Cook WD, Zipper MD and Burchill P, Polymer 42:1345-1359 (2001).
37. Horie K, Hiura HSM, Mita I and Kambe H, J Polym Sci A-1 8:1357 (1970).
38. Bonnet A, Pascault JP, Sautereau H, Taha M and Camberlin Y, Macromolecules 32:8517-8523 (1999).
39. Bonnet A, Pascault JP, Sautereau H and Camberlin Y, Macromolecules 32:8524-8530 (1999).
40. Cox WP and Merz EH, J Polym Sci 28:619-622 (1958).
41. Naffakh M, Dumon M, Dupuy J and Gérard JF, J Appl Polym Sci 96:660-672 (2005).
42. Guo Q, Habrard A, Park Y, Halley PJ and Simon GP, J Polym Sci B: Polym Phys 44:889-899 (2006).
43. Cook WD, Zipper MD and Chung ACH, Polymer 39:5431-5439 (1998).