High-order sliding mode control of a DFIG-based wind turbine for power maximization and grid fault tolerance

2009 IEEE International Electric Machines and Drives Conference, IEMDC '09

Volumn , Issue , 2009, Pages 183-189

  Beltran, B ^a   Benbouzid, M E H ^a   Ahmed Ali, T ^b  

^a UNIVERSITÉ DE BRETAGNE OCCIDENTALE   (France)

^b UNIVERSITÉ DE CAEN   (France)

Author keywords

Doubly fed induction generator (DFIG); Grid fault; High order sliding mode; Power generation; Wind turbine

Indexed keywords

CONTROL STRATEGIES; DFIG-BASED WIND TURBINES; DOUBLY-FED INDUCTION GENERATOR; DOUBLY-FED INDUCTION GENERATOR (DFIG); ENERGY CAPTURE; EXTERNAL DISTURBANCES; GRID DISTURBANCE; GRID FAULT; HIGH-ORDER SLIDING MODE; MAXIMUM POWER POINT TRACKING CONTROLS; MECHANICAL STRESS; POWER EXTRACTION; UNMODELED DYNAMICS; VARIABLE SPEED SYSTEM; WIND TURBINE SIMULATOR;

ASYNCHRONOUS GENERATORS; ELECTRIC DRIVES; ELECTRIC GENERATORS; ELECTRIC MACHINERY; ENGINES; FAULT TOLERANCE; FITS AND TOLERANCES; MESH GENERATION; PHOTOVOLTAIC EFFECTS; POWER CONVERTERS; PUMPS; QUALITY ASSURANCE; SLIDING MODE CONTROL; STRESSES; VIBRATIONS (MECHANICAL); WIND STRESS; WIND TURBINES;

WIND POWER;

EID: 70349472532     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/IEMDC.2009.5075203     Document Type: Conference Paper

References (36)

1. R. Thresher et al., "The status and future of wind energy technology," IEEE Power & Energy Magazine, vol. 5, no. 6, pp. 34-46, November/December 2007.
2. F.D. Bianchi et al., Wind Turbine Control Systems. Principles, Modelling and Gain Scheduling Design. London: Springer 2007.
3. B. Beltran et al., "Sliding mode power control of variable speed wind energy conversion systems," IEEE Trans. Energy Conversion, vol. 23, no. 2, pp. 551-558, June 2008.
4. S. Müller et al., "Doubly fed induction generator systems," IEEE Industry Applications Magazine, vol. 8, n°3, pp. 26-33, May-June 2002.
5. M.E.H. Benbouzid et al., "The state of the art of generators for wind energy conversion systems," in Proceedings of ICEM'06, Chania, Crete Island, Greece, September 2006.
6. J.M. Carrasco et al., "Power-electronic systems for the grid integration of renewable energy sources: A survey," IEEE Trans. Industrial Electronics, vol. 53, n°4, pp. 1002-1016, June 2006.
7. T. Senjyu et al., "Output power leveling of wind turbine Generator for all operating regions by pitch angle control," IEEE Trans. Energy Conversion, vol. 21, n°2, pp. 467-475, June 2006.
8. R. Pena et al., "Sensorless control of doubly-fed induction generators using a rotor-current-based MRAS observer," IEEE Trans. Industrial Electronics, vol. 55, n°1, pp. 330-339, January 2008.
9. A.K. Jain et al., "Wound rotor induction generator with sensorless control and integrated active filter for feeding nonlinear loads in a stand-alone grid," IEEE Trans. Industrial Electronics, vol. 55, n°1, pp. 330-339, January 2008.
10. F. Bonnet et al., "Dual direct torque control of doubly fed induction machine," IEEE Trans. Industrial Electronics, vol. 54, n°5, pp. 2482-2490, October 2007.
11. G. Iwanski et al., "Sensorless direct voltage control of the stand-alone slip-ring induction generator," IEEE Trans. Industrial Electronics, vol. 54, n°2, pp. 1237-1239, April 2007.
12. G. Tapia et al., "Proportional-integral regulator-based approach to wind farm reactive power management for secondary voltage control," IEEE Trans. Energy Conversion, vol. 22, n°2, pp. 488-498, June 2007.
13. L. Xu et al., "Direct active and reactive power control of DFIG for wind energy generation," IEEE Trans. Energy Conversion, vol. 21, n°3, pp. 750-758, September 2006.
14. R. Cardenas et al., "MRAS observer for sensorless control of standalone doubly fed induction generators," IEEE Trans. Energy Conversion, vol. 20, n°4, pp. 710-718, December 2005.
15. A. Mirecki et al., "Architecture complexity and energy efficiency of small wind turbines," IEEE Trans. Industrial Electronics, vol. 54, no. 1, pp. 660-670, February 2007.
16. I. Munteanu et al., "Energy-reliability optimization of wind energy conversion systems by sliding mode control," IEEE Trans. Energy Conversion, vol. 23, n°3, pp. 975-985, September 2008.
17. B. Beltran et al., "Sliding mode power control of variable-speed wind energy conversion systems," IEEE Trans. Energy Conversion, vol. 23, n°2, pp. 551-558, June 2008.
18. J. Matas et al., "Feedback linearization of direct-drive synchronous wind-turbines via a sliding mode approach," IEEE Trans. Power Electronics, vol. 23, n°3, pp. 1093-1103, May 2008.
19. F. Valenciaga et al., "Variable structure control of a wind energy conversion system based on a brushless doubly fed reluctance generator," IEEE Trans. Energy Conversion, vol. 22, n°2, pp. 499-506, June 2008.
20. A. Levant et al., "Integral high-order sliding modes," IEEE Trans. Automatic Control, vol. 52, n°7, pp. 1278-1282, July 2007.
21. L. Fridman and A. Levant, Sliding Mode Control in Engineering, Marcel Dekker, Inc., 2002, Chap. 3 Higher Order Sliding Modes, pp. 53-101.
22. S.E. Ben Elghali et al., "High-order sliding mode control of DFIG-based marine current turbine", in Proceedings of the IEEE IECON'08, Orlando, Florida (USA), pp. 1228-1233, November 2008.
23. B. Beltran et al., "High-order sliding mode control of variable speed wind turbines," IEEE Trans. Industrial Electronics, IEEE Xplore - 10.1109/TIE.2008.2006949, 2009.
24. F. Valenciaga et al., "High-order sliding control for a wind energy conversion system based on a permanent magnet synchronous generator," IEEE Trans. Energy Conversion, vol. 23, n°3, pp. 860-867, September 2008.
25. http://wind.nrel.gov/designcodes/simulators/fast/. (Last accessed December 2008).
26. R. Fadaeinedjad et al., "Simulation of a wind turbine with doubly fed induction generator by FAST and Simulink," IEEE Trans. Energy Conversion, vol. 23, no. 2, pp. 690-700, June 2008.
27. A. Manjock, "Design codes FAST and ADAMS® for load calculations of onshore wind turbines," Report No.72042, Germanischer Lloyd WindEnergie GmbH, Hamburg (Germany), May 26, 2005.
28. M.M. Hand et al., "Advanced control design and field testing for wind turbines at the National Renewable Energy Laboratory," NREL/CP-500-36118, May 2004.
29. F. Poitiers et al., "Advanced control of a doubly-fed induction generator for wind energy conversion," Electr. Power Syst. Res., doi:10.1016/j.epsr.2009.01.007, 2009.
30. R. Cardenas et al., "Sensorless vector control of induction machines for variable-speed wind energy applications," IEEE Trans. Energy Conversion, vol. 19, n°1, pp. 196-205, March 2004.
31. A. Mullane et al., "Wind-turbine fault ride-through enhancement," IEEE Trans. Power Systems, vol. 20, n°4, pp. 1929-1937, November 2005.
32. Y. Zhou et al., "Operation of grid-connected DFIG under unbalanced grid voltage Condition," IEEE Trans. Energy Conversion, vol. 24, n°1, pp. 240-246, March 2009.
33. J. Hu et al., "Improved control of DFIG systems during network unbalance using PI-R current regulators," IEEE Trans. Industrial Electronics, vol. 56, n°2, pp. 439-451, February 2009.
34. D. Santos-Martin et al., "Direct power control applied to doubly fed induction generator under unbalanced grid voltage conditions," IEEE Trans. Power Electronics, vol. 23, n°5, pp. 2328-2336, September 2008.
35. P.S. Flannery et al., "A fault tolerant doubly fed induction generator wind turbine using a parallel grid side rectifier and series grid side converter," IEEE Trans. Power Electronics, vol. 23, n°3, pp. 1126-1135, May 2008.
36. O. Gomis-Bellmunt et al., "Ride-through control of a doubly fed induction generator under unbalanced voltage sags," IEEE Trans. Energy Conversion, vol. 23, n°4, pp. 1036-1045, December 2008.