Influence of bitumen colloidal nature on the design of isocyanate-based bituminous products with enhanced rheological properties

Industrial and Engineering Chemistry Research

Volumn 48, Issue 18, 2009, Pages 8464-8470

  Carrera, Virginia ^a   Partal, Pedro ^a   García Morales, Moisés ^a   Gallegos, Críspulo ^a   Páez, Antonio ^b  

^a UNIVERSITY OF HUELVA   (Spain)

^b REPSOL YPF   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

AFM; CHEMICAL CHARACTERIZATION; DIPHENYLMETHANE DIISOCYANATE; FUNCTIONALIZED; ISOCYANATE GROUP; LOW MOLECULAR WEIGHT; MICROSTRUCTURAL ANALYSIS; MODIFICATION DEGREES; MODIFIED BINDERS; MODULATED DIFFERENTIAL SCANNING CALORIMETRY; POLYPROPYLENE GLYCOL; REACTIVE POLYMERS; RHEOLOGICAL PROPERTY; SHEAR RHEOLOGY; THREE-DIMENSIONAL NETWORKS; TLC-FID;

ATOMIC FORCE MICROSCOPY; CHEMICAL MODIFICATION; CHEMICAL REACTIVITY; DIFFERENTIAL SCANNING CALORIMETRY; FUNCTIONAL POLYMERS; GLYCOLS; POLYMERS; POLYPROPYLENE OXIDES; RHEOLOGY;

BITUMINOUS MATERIALS;

EID: 70349331052     PISSN: 08885885     EISSN: None     Source Type: Journal    
DOI: 10.1021/ie9004404     Document Type: Article

References (27)

1. Lesueur, D. The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modification. AdV. Colloid Interface Sci. 2009, 145, 42.
2. Becker, Y.; Müller, A. J.; Rodríguez, Y. Use of rheological compatibility criteria to study SBS modified asphalts. J. Appl. Polym. Sci. 2003, 90, 1772.
3. Iqbal, M. H.; Hussein, I. A.; Al-Abdul Wahhab, H. I.; Amin, H. B. Rheological Investigation of the influence of acrylate polymers on the modification of asphalt. J. Appl. Polym. Sci. 2006, 102, 3446.
4. Whiteoak, D. The Shell Bitumen Handbook; Shell Bitumen U.K.: Surrey, 1990.
5. Singh, B.; Tarannum, H.; Gupta, M. Use of isocyanate production waste in the preparation of improved waterproofing bitumen. J. Appl. Polym. Sci. 2003, 90, 1365.
6. Newman, J. K. Dynamic shear rheological properties of polymer modified asphalts binder. J. Elastomers Plast. 1998, 30, 245.
7. Yousefi, A. A. Polyethylene dispersions in bitumen: the effects of the polymer structural parameters. J. Appl. Polym. Sci. 2003, 90, 3183.
8. Polacco, G.; Stastna, J.; Biondi, D.; Antonelli, F.; Vlachovicova, Z.; Zanzotto, L. J. Rheology of asphalts modified with glycidylmethacrylate functionalized polymers. J. Colloid Interface Sci. 2004, 280, 366.
9. Navarro, F. J.; Partal, P.; García-Morales, M.; Martínez-Boza, F. J.; Gallegos, C. Bitumen modification with a low-molecular-weight reactive isocyanate-terminated polymer. Fuel 2007, 86, 2291.
10. Polacco, G.; Stastna, J.; Vlachovicova, Z.; Biondi, D.; Zanzotto, L. Temporary networks in polymer-modified asphalts. J. Polym. Eng. Sci. 2004, 44, 2185.
11. Martín-Alfonso, M. J.; Partal, P.; Navarro, F. J.; García-Morales, M.; Gallegos, C. Role of water in the Development of New Isocyanate- Based Bituminous Products. Ind. Eng. Chem. Res. 2008, 47, 6933.
12. Martín-Alfonso, M. J.; Partal, P.; Navarro, F. J.; García-Morales, M.; Gallegos, C. Use of a MDI-functionalized reactive polymer for the manufacture of modified bitumen with enhanced properties for roofing applications. J. Eur. Polym. 2008, 44, 1451.
13. American Society for Testing and Materials. Standard test method for penetration of bituminous materials. ASTM D5.
14. American Society for Testing and Materials. Standard test method for softening point of bitumen (ring and ball apparatus). ASTM D36.
15. American Association of Stage Highway and Transportation Officials. Standard specification for performance graded asphalt binder using a dynamic shear rheometer (DSR). AASHTO designation TP5. Gaithersburg; 1993.
16. Eckert, A. The application of Iatroscan-technique for analysis of bitumen. Pet. Coal 2001, 43, 51.
17. Masson, J. F.; Polomark, G. M.; Collins, P. Time-dependent microstructure of bitumen and its fractions by modulated differential scanning calorimetry. Energy Fuels 2002, 16, 470.
18. Singh, B.; Gupta, M.; Kumar, L. J. Bituminous polyurethane network: Preparation, properties, and end use. Appl. Polym. Sci. 2006, 101, 217.
19. American Association of Stage Highway and Transportation Officials. Standard specification for performance graded asphalt binder. AASHTO designation MP1. Gaithersburg; 1993.
20. Martínez-Boza, F. J.; Partal, P.; Conde, B.; Gallegos, C. Influence of temperature and composition on the linear viscoelastic properties of synthetic binders. Energy Fuels 2000, 14, 131.
21. Bousmina, M.; Bataille, P.; Sapieha, S.; Schreiber, H. P. Comparing the effect of corona treatment and block copolymer addition on rheological properties of polystyrene/polyethylene blends. J. Rheol. 1995, 39, 499.
22. Bousmina, M. Rheology of polymer blends: linear model for viscoelastic emulsions. Rheol. Acta 1999, 38, 73-83.
23. Masson, J. F.; Leblond, V.; Margeson, J. Bitumen morphologies by phase-detection atomic force microscopy. J. Microsc. 2006, 221, 17.
24. Masson, J. F.; Polomark, G. M. Bitumen microstructure by modulated differential scanning calorimetry. Thermochim. Acta 2001, 374, 105.
25. Redelius, P. G. Solubility parameters and bitumen. Fuel 2000, 79, 27.
26. Palade, L. I.; Attané, P.; Camaro, S. Linear viscoelastic behavior of asphalt and asphalt based mastic. Rheol. Acta 2000, 39, 180.
27. Lesueur, D.; Gerard, J. F.; Claudy, P.; Letoffe, J. M.; Planche, J. P.; Martin, D. A structure-related model to describe asphalt linear viscoelasticity. J. Rheol. 1996, 40, 813.