Megaspeed drive systems: Pushing beyond 1 million r/min

IEEE/ASME Transactions on Mechatronics

Volumn 14, Issue 5, 2009, Pages 564-574

  Zwyssig, Christof ^a   Kolar, Johann W ^b   Round, Simon D ^b,c  

^a Celeroton   (Switzerland)

^b ETH ZURICH   (Switzerland)

^c ABB SWITZERLAND LTD   (Switzerland)

Author keywords

Electric drives; Permanent magnet (PM) machines; Turbomachinery; Ultrahigh speed

Indexed keywords

AIR BEARING; COMPRESSOR SYSTEMS; DRIVE SYSTEMS; EMERGING APPLICATIONS; EXTREME TEMPERATURES; HEAT PUMPS; HIGH-FREQUENCY LOSS; HIGH-SPEED; INVERTER TOPOLOGIES; MESOSCALE; NANO SCALE; PERMANENT-MAGNET (PM) MACHINES; POWER RANGE; PRESSURIZED GAS; ROTATIONAL SPEED; ROTOR DESIGN; SWISS FEDERAL INSTITUTE OF TECHNOLOGY; TORQUE DENSITY; ULTRAHIGH SPEED;

BALL BEARINGS; BEARINGS (STRUCTURAL); ELECTRIC DRIVES; ELECTRIC GENERATORS; ELECTRIC POWER GENERATION; ELECTRIC WINDINGS; FUEL CELLS; GAS TURBINES; MACHINE DESIGN; MAGNETIC BEARINGS; MAGNETIC MATERIALS; PERMANENT MAGNETS; PRINTED CIRCUIT BOARDS; PRINTED CIRCUIT MANUFACTURE; RESEARCH; SPEED; STATORS; TURBOMACHINERY;

FOIL BEARINGS;

EID: 70349232859     PISSN: 10834435     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMECH.2008.2009310     Document Type: Article

References (49)

1. J. Szydlo, "High speed depth optical scanner," Ph.D. dissertation, Ecole Polytechnique Federale De Lausanne, Lausanne, Switzerland, 2000.
2. A. Binder and T. Schneider, "High-speed inverter-fed AC drives," presented at the Int. Aegean Conf. Electr. Mach. Power Electron. (ELECTROMOTION 2007), Bodrum, Turkey, Sep. 10-12.
3. A. H. Epstein, "Millimeter-scale, MEMS gas turbine engines," in Proc. ASME Turbo Expo., Atlanta, GA, Jun. 2003, pp. 1-28.
4. S. Das, D. P. Arnold, I. Zana, J. W. Park, M. G. Allen, and J. H. Lang, "Microfabricated high-speed axial-flux multiwatt permanentmagnet generators - Part I: Modeling," J. Microelectromech. Syst., vol. 15, no. 5, pp. 1330-1350, Oct. 2006.
5. K. Komori and T. Yaman, "Magnetically levitated micro PM motors by two types of active magnetic bearings," IEEE/ASME Trans. Mechatronics vol. 6, no. 1, pp. 43-49, Mar. 2001.
6. U. Kafader and J. Schulze, "Similarity relations in electromagnetic motors - Limitations and consequences for the design of small dc motors," in Proc. 9th Int. Conf. New Actuators, ACTUATOR 2004, Bremen, Germany, Jun. 14-16, pp. 309-312.
7. I. Takahashi, T. Koganezawa, G. Su, and K. Ohyama, "A super high speed PM motor drive system by a quasi-current source inverter," IEEE Trans. Ind. Appl., vol. 30, no. 3, pp. 683-690, May/Jun. 1994.
8. (2008). [Online]. Available: http://www.westwind-airbearings.com/ specialist/waferGrinding.html
9. (2008). [Online]. Available: http://www.westwind-airbearings.com/pcb/ overview.html
10. M. Kauf. (2002, Jan.). Microvia formation: Technology and cost comparison [Online]. Available: http://www.circuitree.com. (URL)
11. J. Thur, "Antriebssystem für höchste Geschwindigkeiten zur feldorientierten Regelung vonpermanenterregten Hochfrequenzspindeln ohne Drehgeber und ohne Signalrechner," Ph.D. dissertation, Bergische Univ. Wuppertal, Wuppertal, Germany, 2006.
12. (2008). [Online]. Available: http://www.westwind-airbearings.com/pcb/ index.html
13. (2008). [Online].Available: http://www.sirona.com/ecomaXL/ index.php?site=SIRONA_COM_s_and_c_handpieces
14. (2008). [Online]. Available: http://www.miti.cc/
15. J. R. Bumpy, E. S. Spooner, J. Carter, H. Tennant, G. G. Mego, G. Dellora, W. Gstrein, H. Sutter, and J. Wagner, "Electrical machines for use in electrically assisted turbochargers," in Proc. Power Electron., Mach. Drives Conf., Apr. 2004, vol. 1, pp. 344-349.
16. I. Kolmanovsky and A. G. Stefanopoulou, "Evaluation of turbocharger power assist system using optimal control techniques," presented at the Society of Automotive Engineers (SAE) World Congress, Detroit, MI, Mar. 2000, SAE Paper 2000-01-0519.
17. F. Westin, "Simulation of turbocharged SI-engines - With focus on the turbine," Ph.D. dissertation, Royal Inst. Technol., Stockholm, Sweden, 2005.
18. S. Münz, M. Schier, H. P. Schmalzl, and T. Bertolini. (2008). eBooster design and performance of a innovative electrically driven charging system [Online]. Available: http://www.turbos.bwauto.com/files/ library/bwtslibrary138325.pdf
19. (2008). [Online]. Available: http://www.turbos.bwauto.com/products/ eBooster.aspx
20. S. Kang, S. J. J. Lee, and F. B. Prinz, "Size does matter: The pros and cons of miniaturization," ABB Rev., vol. 2, no. 2, pp. 54-62, 2002.
21. S. A. Jacobson and A. H. Epstein, "An informal survey of power MEMS," in Proc. Int. Symp. Micro-Mech. Eng., Dec. 2003, pp. 1-8.
22. S. Kang, "Fabrication of functional mesoscopic ceramic parts for micro gas turbine engines," Ph.D. dissertation, Stanford Univ., Stanford, CA, Nov. 2001.
23. (2008). [Online]. Available: http://www.m-dot.com/
24. P. Tsao, M. Senesky, and S. R. Sanders, "An integrated flywheel energy storage system with homopolar inductor motor/generator and high-frequency drive," IEEE Trans. Ind. Appl., vol. 39, no. 6, pp. 1710-1725, Nov./Dec. 2003.
25. W. Wang, "Design of high speed flywheel motor/generator for aerospace applications," Ph.D. dissertation, Pennsylvania State Univ., Philadelphia, 2004.
26. (2008). [Online]. Available: http://space-power.grc.nasa.gov/ppo/ projects/flywheel/
27. T. Mashimo, S. Okazaki, and S. Shibazaki, "Ultracentrifuge apparatus to generate a strong acceleration field of over 1 000 000 g at a high temperature in condensed matter," Rev. Sci. Instrum., vol. 67, no. 9, pp. 3170-3174, Sep. 1996.
28. J. Oyama, T. Higuchi, T. Abe, K. Shigematsu, and R. Moriguchi, "The development of small size ultra-high speed drive system," in Proc. Power Convers. Conf., Nagoya, Japan, Apr. 2007, pp. 1571-1576.
29. (2008). [Online]. Available: http://www.miti.cc/
30. (2008). [Online]. Available: http://www.calnetix.com/highspeed.cfm
31. D. P. Arnold, S. Das, J. W. Park, I. Zana, J. H. Lang, and M. G. Allen, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: Design, fabrication, and testing," J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, Oct. 2006.
32. D. E. Hesmondhalgh and D. Tipping, "Design high-speed permanent magnet motor," in Proc. IEE Colloq. Permanent Magnet Mach., Jun. 15, 1988, pp. 6-1-6-2.
33. (2008). [Online]. Available: http://www.ate-system.de/
34. C. Zwyssig, J. W. Kolar, W. Thaler, and M. Vohrer, "Design of a 100 W, 500000 rpm permanent-magnet generator for mesoscale gas turbines," in Proc. IEEE Ind. Appl. Conf. 2005, Hong Kong, Oct. 2-6, vol. 1, pp. 253-260.
35. C. Zwyssig, S. D. Round, and J. W. Kolar, "Analytical and experimental investigation of a lowtorque, ultra-high speed drive system," in Proc. IEEE Ind. Appl. Conf. 2006, Tampa, FL, Oct. 8-12, vol. 3, pp. 1507-1513.
36. M. A. Rahman, A. Chiba, and T. Fukao, "Super high speed electrical machines - Summary," in Proc. 2004 IEEE Power Eng. Soc. General Meeting, Jun. 6-10, vol. 2, pp. 1272-1275.
37. P. L. Chapman and P. T. Krein, "Micromotor technology: Electric drive designer's perspective," in Proc. IEEE Ind. Appl. Conf. 2001, Chicago, IL, Sep. 30-Oct. 4, vol. 3, pp. 1978-1983.
38. N. Bianchi, S. Bolognani, and F. Luise, "Potentials and limits of highspeed PM motors," IEEE Trans. Ind. Appl., vol. 40, no. 6, pp. 1570-1578, Nov./Dec. 2004.
39. J. Luomi, C. Zwyssig, A. Looser, and J.W. Kolar, "Efficiency optimization of a 100-W, 500 000-rpm permanent-magnet machine including air friction losses," in Proc. IEEE Ind. Appl. Conf. 2007, New Orleans, LA, pp. 861-868.
40. C. Zwyssig, S. D. Round, and J. W. Kolar, "Power electronics interface for a 100 W, 500000 rpm gas turbine portable power unit," in Proc. Appl. Power Electron. Conf., Dallas, TX, Mar. 19-23, 2006, pp. 283-289.
41. K. H. Kim and M. J. Youn, "Performance comparison of PWM inverter and variable DC link inverter schemes for high-speed sensorless control of BLDC motor," Electron. Lett., vol. 38, pp. 1294-1295, 2002.
42. K. Taniguchi and A. Okumura, "A PAM inverter system for vector control of induction motor," in Proc. PCC Conf., 1993, pp. 478-483.
43. J. Zhang and M. Schroff, "High-performance micromotor control systems," in Proc. 29th Annu. Conf. IEEE Ind. Electron. Soc. (IECON 2003), Nov., vol. 1, no. 2-6, pp. 347-352.
44. Z. Q. Zhu, J. D. Ede, and D. Howe, "Design criteria for brushless dc motors for high-speed sensorless operation," Int. J. Appl. Electromagn. Mech., vol. 15, pp. 79-87, 2001/2002.
45. K. Iizuka, H. Uzuhashi, M. Kano, T. Endo, and K. Mohri, "Microcomputer control for sensorless brushless motor," IEEE Trans. Ind. Appl., vol. IA-21, no. 3, pp. 595-601, May/Jun. 1985.
46. (2008). [Online]. Available: http://www.solarimpulse.com/
47. H. Kanebako and Y. Okada, "New design of hybrid-type self-bearing motor for small, high-speed spindle," IEEE/ASME Trans. Mechatronics, vol. 8, no. 1, pp. 111-119, Mar. 2003.
48. B. Schneider, M. Bruderer, D. Dyntar, C. Zwyssig, M. Diener, K. Boulouchos, R. S. Abhari, L. Guzzella, and J. W. Kolar, "Ultra-highenergy-density converter for portable power," in Proc. Int. Workshop Micro Nanotechnol. Power Generation Energy Convers. Appl. Tokyo, Japan, Nov. 28-30, 2005, pp. 81-84.
49. J. H. Glenn Research Center. High-temperature switched-reluctance electric motor. (2008). [Online]. Available: http://www.techbriefs.com/ Briefs/Feb03/LEW17287.html