Applications of artificial intelligence and data mining techniques in soil modeling

Geomechanics and Engineering

Volumn 1, Issue 1, 2009, Pages 53-74

  Javadi, A A ^a   Rezania, M ^a  

^a UNIVERSITY OF EXETER   (United Kingdom)

Author keywords

Artificial intelligence; Data mining; Evolutionary computation; Genetic programming; Geotechnical engineering; Neural network; Soil modeling

Indexed keywords

ARTIFICIAL INTELLIGENCE; DATA MINING; EVOLUTIONARY ALGORITHMS; GENETIC ALGORITHMS; GENETIC PROGRAMMING; GEOTECHNICAL ENGINEERING; NEURAL NETWORKS; PATTERN RECOGNITION SYSTEMS; SOILS;

COMPUTER-AIDED PATTERN; CONSTITUTIVE MODEL OF SOILS; CONVENTIONAL MODELS; EVOLUTIONARY POLYNOMIAL REGRESSIONS; EVOLUTIONARY PROGRAMMING APPROACH; GEOTECHNICAL APPLICATION; PATTERN RECOGNITION METHOD; SOIL MODEL;

COMPUTER SYSTEMS PROGRAMMING;

EID: 70249122802     PISSN: 2005307X     EISSN: 20926219     Source Type: Journal    
DOI: 10.12989/gae.2009.1.1.053     Document Type: Article

References (83)

1. Abu-Kiefa, M.A. (1998), “General regression neural networks for driven piles in cohesionless soils”, J. Geotech. Geoenviron. Eng., ASCE, 124(12), 1177-1185.
2. Amorosi, A., Millar, D.L. and Rampello, S. (1996), “On the Use of Artificial Neural Networks as Generic Descriptors of Geomaterial Mechanical Behavior”, Proceeding of the International Symposium on Prediction and Performance in Rock Mechanics and Rock Engineering, EUROCK '96, Torino, Italy, 161-168.
3. Banimahd, M., Yasrobi, S.S. and Woodward, P.K. (2005), “Artificial neural network for stress-strain behavior of sandy soils: Knowledge based verification”, Comput. Geotech., 32(5), 377-386.
4. Benardos, A.G. and Kaliampakos, D.C. (2004), “Modeling TBM performance with artificial neural networks”, J. Tunneling Underground Space Technology, 19(6), 597-605.
5. Caudill, M. (1991), “Neural network training tips and techniques”, AI Expert, 6(1), 56-61.
6. Dayhoff, J.E. (1990), Neural Network Architectures: An Introduction, Van Nostrand Reinhold, New York.
7. Desai, C.S. and Siriwardane, H.J. (1984), Constitutive Laws for Engineering Materials with Emphasis on Geological Materials, Prentice-Hall, Englewood Cliffs, NJ.
8. Desai, C.S., Somasundaram, S. and Frantziskonis, G. (1986), “A Hierarchical Approach for Constitutive Modeling of Geologic Materials”, Int. J. Numer. Anal. Met. Geomech., 10(3), 225-257.
9. Doglioni, A. (2004), “A novel hybrid evolutionary technique for environmental hydraulic modeling”, Ph.D. dissertation, Technical University of Bari, Italy.
10. Doglioni, A., Giustolisi, O., Savic, D.A. and Webb, B.W. (2008), “An investigation on stream temperature analysis based on evolutionary computing”, Hydrol. Process, 22(3) 315-326.
11. Drakos, S., Shin, H.S. and Pande, G.N. (2006), “Finite elements with artificial intelligence”, Proceeding of the 2nd International Congress on Computational Mechanics and Simulation, Guwahati, India, Paper No. 297.
12. Duncan, J.M. and Chang, C.Y. (1970), “Non-linear analysis of stress and strain in soils”, J. Soil Mech. Found. Division, ASCE, 96(SM5), 1629-1653.
13. Einstein, H.H. and Hirschfeld, R.C. (1973), “Model studies on mechanics of jointed rock”, J. Soil Mech. Found. Division, ASCE, 99(SM3), 229-248.
14. Ellis, G., Yao, C. and Zhao, R. (1992), “Neural network modeling of mechanical behavior of sand”, Proceedings of the 9th ASCE Conference on Engineering Mechanics, Texas, 421-424.
15. Ellis, G.W., Yao, C., Zhao, R. and Penumadu, D. (1995), “Stress-Strain Modeling of Sands using Artificial Neural Netwoks”, J. Geotech. Eng. Division, ASCE, 121(5), 429-435.
16. Elman, J.L. (1990), “Finding structure in time”, Cognitive Science, 14, 179–211.
17. Flood, I. and Kartam, N. (1994). “Neural networks in civil engineering II principles and understanding”, J. Comput. Civil. Eng., ASCE, 8(2), 149-162.
18. Garrett, J.H. (1994). “Where and why artificial neural networks are applicable in civil engineering”, J. Comput. Civil. Eng., ASCE, 8(2), 129-130.
19. Ghaboussi, J. and Wilson, E.L. (1973), “Flow of compressible fluid in porous elastic media”, Int. J. Numer. Met. Eng., 5, 419-442.
20. Ghaboussi, J., Carret, J. and Wu, X. (1990), “Material modeling with neural networks”, Proceedings of the international conference on numerical methods in engineering: theory and applications, Swansea, UK, 701-717.
21. Ghaboussi, J., Carret, J. and Wu, X. (1991), “Knowledge-based modeling of material behavior with neural networks”, J. Eng. Mech. Division, 117(1), 132-153.
22. Ghaboussi, J., Lade, P.V. and Sidarta, D.E. (1994), “Neural network based modeling in geomechanics”, Proceedings of the 8th International Conference on Computer Methods and Advances in Geomechanics, Morgantown, WV, 153-164.
23. Ghaboussi, J., Pecknold, D.A., Zhang, M. and Haj-Ali, R.M. (1998), “Autoprogressive training of neural network constitutive models”, Int. J. Numer. Met. Eng., 42(1), 105-126.
24. Ghaboussi, J. and Sidarta, D.E. (1998), “New nested adaptive neural networks (NANN) for constitutive modeling”, Comput. and Geotech., 22(1), 29-52.
25. Giustolisi, O. (2002). “Some techniques to avoid overfitting of artificial neural networks”, Proceeding of the 5th International Conference of Hydroinformatics, Cardiff, UK, 1465-1477.
26. Giustolisi, O. and Savic, D.A. (2006), “A symbolic data-driven technique based on evolutionary polynomial regression”, J. Hydroinform., 8(3), 207-222.
27. Giustolisi, O., Doglioni, A., Savic, D.A. and Webb, B.W. (2007), “A multi-model approach to analysis of environmental phenomena”, Environ. Model. Softw., 22(5), 674-682.
28. Giustolisi, O. and Simeone, V. (2006), Optimal design of artificial neural networks by a multi-objective strategy: groundwater level predictions. Hydrol. Sci. J., 51(3), 502-523.
29. Goh, A.T.C. (1996), “Pile driving records reanalyzed using neural networks”, J. Geotech. Geoenviron. Eng., ASCE, 122(6), 492-495.
30. Habibagahi, G. and Bamdad, A. (2003), “A neural network framework for mechanical behavior of unsaturated soils”, Can. Geotech. J., 40(3), 684-693.
31. Haj-Ali, R.M., Pecknold, D.A., Ghaboussi, J. and Voyiadjis, G.Z. (2001), “Simulated micromechanical models using artificial neural networks”, J. Eng. Mech., 127(7), 730-738.
32. Hashash, Y.M.A., Jung, S. and Ghaboussi, J. (2004), “Numerical implementation of a neural network based material model in finite element analysis”, Int. J. Numer. Met. Eng., 59, 989-1005.
33. Javadi, A.A. (2006), “Prediction of air losses in compressed air tunneling using neural network”, J. Tunneling Underground Space Technology, 21, 9-20.
34. Javadi, A.A. and Rezania, M. (2006), “A new genetic programming-based evolutionary approach for constitutive modeling of soils”. Proceeding of the 7th World Congress on Computational Mechanics, Los Angeles, California, USA.
35. Javadi, A.A. and Rezania, M. (2008a), “A new approach to data-driven modeling in geotechnical engineering”, Int. J. Geomech. Geoeng., (Under Review).
36. Javadi, A.A. and Rezania, M. (2008b), A New Approach to Constitutive Modeling of Soils in Finite Element Analysis using Evolutionary Computation. Proceedings of the Intelligent Computing in Engineering-ICE08 Conference, 2-4 July, Plymouth, UK.
37. Javadi, A.A., Rezania, M. and Nezhad, M.M. (2007), “A new approach to data-driven modeling in civil engineering”, Proceeding of the 1st International Conference on Digital Communications and Computer Applications, Amman, Jordan, 19-22 March, 2007, 17-24.
38. Javadi, A. A., Rezania, M. and Nezhad, M.M. (2006), “Evaluation of liquefaction induced lateral displacements using genetic programming”, Comput. Geotech., 33(4-5), 222-233.
39. Javadi, A.A., Tan, T.P. and Elkassas, A.S.I. (2004a), “An intelligent finite element method”, Proceeding of the 11th International EG-ICE Workshop, Weimar, Germany, 16-25.
40. Javadi, A.A., Tan, T.P. and Elkassas, A.S.I. (2005), “Intelligent finite element method”, Proceeding of the 3rd MIT Conference on Computational Fluid and Solid Mechanics, Cambridge, Massachusetts, USA.
41. Javadi, A.A., Tan, T.P., Elkassas, A.S.I. and Zhang, M. (2004b), “Intelligent finite element method: Development of the algorithm”, Proceeding of the 6th World Congress on Computational Mechanics-WCCM VI, Beijing, China.
42. Javadi, A.A., Tan, T.P. and Zhang, M. (2003), “Neural network for constitutive modeling in finite element analysis”, Comput. Assist. Mech. Eng. Sci., 10, 375-381.
43. Javadi, A.A., Zhang, M. and Tan, T.P. (2002), “Neural network for constitutive modeling of material in finite element analysis”, Proceedings of the 3rd International Workshop/Euroconference on Trefftz Method, Exeter, UK, 61-62.
44. Juang, C.H. and Chen, C.J. (1999), “CPT-based liquefaction evaluation using artificial neural networks”, Comput. Aid. Civil Infrastruct. Eng., 14(3), 221-229.
45. Juang, C.H., Jiang, T. and Christopher, R.A. (2001), “Three-dimensional site characterization: neural network approach”, Geotechnique, 51(9), 799-809.
46. Jung, S. and Ghaboussi, J. (2006), “Neural network constitutive model for rate-dependent materials”, Comput. Struct., 84(15-16), 955-963.
47. Lu, M., AbouRizk, S.M. and Hermann, U.H. (2001), “Sensitivity analysis of neural networks in spool fabrication productivity studies”, J. Comput. Civil Eng., ASCE, 15(4), 299-308.
48. Lu, P. and Rosenbaum, M.S. (2003), “Artificial neural networks and grey systems for the prediction of slope stability”, Nat. Hazards, 30(3), 383-395.
49. Kawamoto, T., Ichkawa, Y. and Kyoya, T. (1988), “Deformation and fracturing behavior of discontinuous rock mass and damage mechanics theory”, Int. J. Numer. Anal. Met. Geomech., 12(1), 1-30.
50. Koza, J.R. (1992), Genetic Programming: on the Programming of Computers by Natural Selection, Massachusetts Institute of Technology Press, Cambridge, Massachusetts, USA.
51. Lade, P.V. and Duncan, J.M. (1975), “Elastoplastic stress-strain theory for cohesionless soil”, J. Geotech. Eng. Division, ASCE, 101(GT10), 1037-1053.
52. Lefik, M. and Schrefler, B.A. (2003), “Artificial neural network as an incremental non-linear constitutive model for finite element code”, Comput. Method. Appl. Mech. Eng., 192, 3265-3283.
53. Lippmann, R.P. (1987), “An introduction to computing with neural nets”, IEEE Acoust. Speech Signal Process Mag., 4(2), 4-22.
54. Logar, J. and Turk, G. (1997), “Neural network as a constitutive model of soil”, Zeitschrift für Angewandte Mathematik und Mechanik, 77(S1), 195-196.
55. Millar, D.L. and Calderbank, P.A. (1995), “On the investigation of multilayer feedforward neural network model of rock deformability behavior”, Proceeding of The 8th International Congress on Rock Mechanics, Tokyo, Japan, 933-938.
56. Millar, D.L. and Clarici, E. (1994), “Investigation of back-propagation artificial neural networks in modeling the stress-strain behavior of sandstone rock”, Proceedings of IEEE International Conference on Neural Networks, Piscataway, NJ, 3326-3331.
57. Najjar, Y.M. and Basheer, I.A. (1996), “Discussion of stress-strain modeling of sands using artificial neural networks”, J. Geotech. Eng. Division, ASCE, 122(11), 949-950.
58. Najjar, Y.M., Basheer, I.A. and Ali, H.E. (1999), “On the use of neuronets for simulating the stress-strain behavior of soils”, Proceeding of the 7th International Symposium on Numerical Models in Geomechanics-NUMOG VII, Graz, Austria, 657-662.
59. Owen, D.R.J. and Hinton, E. (1980), “Finite Elements in Plasticity: Theory and Practice”, Pineridge Press, Swansea.
60. Penumadu, D. and Chameau, J.L. (1997), “Geomaterial modeling using neural networks”, Artificial Neural Networks for Civil Engineering: Fundamentals and Applications, N. Kartman, I. Flood, and Garrett, eds., ASCE, 160-184.
61. Penumadu, D. and Zhao, R. (1999), “Triaxial compression behavior of sand and gravel using artificial neural networks”, Comput. Geotech., 24(3), 207-230.
62. Penumadu, D., Zhao, R. and Frost, D. (2000), “Virtual geotechnical laboratory experiments using a simulator”, Int. J. Numeri. Anal. Met. Geomech., 24(5), 439-451.
63. Press, W.H., Teukolsky, S.A., Vetterling, W.T. and Flannery, B.P. (1992), Numerical recipes, Cambridge University Press, UK.
64. Rahman, M.S., Wang, J., Deng, W. and Carter, J.P. (2001), “A neural network model for the uplift capacity of suction caissons”, Comput. Geotech., 28(4), 269-287.
65. Rezania, M. and Javadi, A.A. (2006), “Application of evolutionary programming techniques in geotechnical engineering”, Proceeding of the 6th European Conference on Numerical Methods in Geotechnical Engineering, Schweiger H.F. (ed.), Graz, Austria, 677-682.
66. Rezania, M. and Javadi, A.A. (2007), “A new genetic programming model for predicting settlement of shallow foundations”, Can. Geotech. J., 44(12), 1462-1473.
67. Rezania, M. and Javadi, A.A. (2008a), “Predicting settlement of shallow foundations using evolutionary polynomial regression”, Comput. Aid. Civil Infrastruct. Eng., (Under Review).
68. Rezania, M. and Javadi, A.A. (2008b), “Settlement prediction of shallow foundations; a new approach”, Proceeding of the 2nd British Geotechnical Association International Conference on Foundations, Dundee, Scotland, Paper No. 539.
69. Rezania, M., Javadi, A.A. and Giustolisi, O. (2008a), “An evolutionary-based data mining technique for assessment of civil engineering systems”, J. Eng. Computat., 25(6), 500-517.
70. Rezania, M., Javadi, A.A. and Giustolisi, O. (2008b), “Evaluation of liquefaction potential based on CPT results using evolutionary polynomial regression”, Comput. Geotech., (Under Review).
71. Roscoe, K.H. and Schofield, A.N. (1963), “Mechanical behavior of an idealized ‘wet’ clay”, Proceeding of the 2nd European Conference on Soil Mechanics and Foundation Engineering, Wiesbaden, Germany, 47-54.
72. Rumelhart, D.E., Hinton, G.E. and Williams, R.J. (1986), “Learning representations by back-propagating errors”, Nature, 323, 533-536.
73. Rumelhart, D.E., Hinton, G.E. and Williams, R.J. (1994), Learning Internal Representation by Error Propagation in Parallel Distributed Processing, Massachusetts Institute of Technology Press, Cambridge, Massachusetts, USA.
74. Shin, H.S. (2001), “Neural network based constitutive models for finite element analysis”, Ph.D. dissertation, University of Wales Swansea, UK.
75. Shin, H.S. and Pande, G.N. (2000), “On self-learning finite element code based on monitored response of structures”, Comput. Geotech., 27, 161-178.
76. Shin, H.S. and Pande, G.N. (2001), “Intelligent finite elements”, Proceeding of Asian-Pacific Conference for Computational Mechanics-APCOM 01, Sydney, Australia, 1301-1310.
77. Shin, H.S. and Pande, G.N. (2002), “Enhancement of data for training neural network based constitutive models for geomaterials”, Proceeding of The 8th International Symposium on Numerical Models in Geomechanics-NUMOG VIII, Rome, Italy, 141-146.
78. Sidarta, D.E. and Ghaboussi, J. (1998), “Constitutive modeling of geomaterials from non-uniform material tests”, Comput. Geotech., 22(1), 53-71.
79. Toll, D.G. (1996), Artificial Intelligence Applications in Geotechnical Engineering, Electronic Journal of Geotechnical Engineering, .
80. Wu, H.C., Zhang, X.B., Bao, T. and Al-Jibouri, S.H. (2001), “Modeling the stress-strain relation for granite using finite element-neural network hybrid algorithms”, Proceeding of the 10th International Conference on Computer Methods and Advances in Geomechanics, Tucson, Arizona, 241-245.
81. Youd, T.L., Hansen, C.M. and Bartlett, S.F. (2002), “Revised multilinear regression equations for prediction of lateral spread displacement”, J. Geotech. Geoenviron. Eng., ASCE, 128(12), 1007-1017.
82. Zhu, J.-H., Zaman, M.M. and Anderson, S.A. (1998a), “Modeling of soil behavior with a recurrent neural network”, Can. Geotech. J., 35(5), 858-872.
83. Zhu, J.-H., Zaman, M.M. and Anderson, S.A. (1998b), “Modeling of shearing behavior of a residual soil with recurrent neural network”, Int. J. Numer. Anal. Met. Geomech., 22(8), 671-687.