Free-volume dependent pressure sensitivity of Zr-based bulk metallic glass

Journal of Materials Research

Volumn 24, Issue 8, 2009, Pages 2697-2704

  Dubach, Alban ^a,b   Prasad, K Eswar ^c   Raghavan, Rejin ^b,c   Löffler, Jörg F ^a   Michler, Johann ^b   Ramamurty, Upadrasta ^c  

^a ETH ZURICH   (Switzerland)

^b SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^c INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

[No Author keywords available]

Indexed keywords

AS-CAST; CONSTRAINT FACTOR; CRYSTALLINE METALS; INSTRUMENTED INDENTATION; PRESSURE SENSITIVITIES; RELAXED CONDITIONS; SEVERE PLASTIC DEFORMATIONS; SHEAR TRANSFORMATION ZONES; STRUCTURAL STATE; YIELD STRENGTH; ZR BASED BULK METALLIC GLASS;

COMPRESSIVE STRENGTH; GLASS; PLASTIC DEFORMATION; PLASTICS; SHOT PEENING; ZIRCONIUM;

METALLIC GLASS;

EID: 70049108355     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2009.0304     Document Type: Article

References (37)

1. R. D. Conner, W. L. Johnson, N. E. Paton, and W. D. Nix: Shear bands and cracking of metallic glass plates in bending. J. Appl. Phys. 94, 904 (2003).
2. 10. Philos. Mag. Lett. 87, 383 (2007).
3. A. Dubach, R. Raghavan, J. F. Löffler, J. Michler, and U. Ramamurty: Micropillar compression studies on a bulk metallic glass in different structural states. Scr. Mater. 60, 567 (2009).
4. M. N. M. Patnaik, R. Narasimhan, and U. Ramamurty: Spherical indentation response of metallic glasses. Acta Mater. 52, 3335 (2004).
5. K. Eswar Prasad, R. Raghavan, and U. Ramamurty: Temperature dependence of pressure sensitivity in a metallic glass. Scr. Mater. 57, 121 (2007).
6. V. Keryvin, K. Eswar Prasad, Y. Gueguen, J-C. Sangleboeuf, and U. Ramamurty: Temperature dependence of mechanical properties and pressure sensitivity in metallic glasses below glass transition. Philos. Mag. 88, 1773 (2008).
7. K. Eswar Prasad, V. Keryvin, and U. Ramamurty: Pressure sensitive flow and constraint factor in amorphous materials below glass transition. J. Mater. Res. 24, 890 (2009).
8. 22.5 bulk metallic glass. Intermatallics 14, 1051 (2006).
9. g annealing. Acta Mater. 53, 1467 (2005).
10. R. Raghavan, R. Ayer, H. W. Jin, C. N. Marzinsky, and U. Ramamurty: Effect of shot peening on the fatigue life of a Zrbased bulk metallic glass. Scr. Mater. 59, 167 (2008).
11. R. Rabe, J. M. Breguet, P. Schwaller, S. Stauss, F. J. Huag, J. Patscheider, and J. Michler: Observation of fracture and plastic deformation during indentation and scratching inside the scanning electron microscope. Thin Solid Films 469, 206 (2004).
12. C. A. Schuh and T. G. Nieh: A nanoindentation study of serrated flow in bulk metallic glasses. Acta Mater. 51, 87 (2003).
13. B. Moser, J. F. Löffler, and J. Michler: Discrete deformation in amorphous metals: An in situ SEM indentation study. Philos. Mag. 86, 5715 (2006).
14. V. Keryvin: Indentation of bulk metallic glasses: Relationships between shear bands observed around the prints and hardness. Acta Mater. 55, 2565 (2007).
15. C. A. Schuh, A. C. Lund, and T. G. Nieh: New regime of homogeneous flow in the deformation map of metallic glasses: Elevated temperature nanoindentation experiments and mechanistic modeling. Acta Mater. 52, 5879 (2004).
16. Y. Zhang, W. H. Wang, and A. L. Greer: Making metallic glasses plastic by control of residual stress. Nat. Mater. 5, 857 (2006).
17. L. Y. Chen, Q. Ge, S. Qu, and J. Z. Jiang: Stress-induced softening and hardening in a bulk metallic glass. Scr. Mater. 59, 1210 (2008).
18. R. Bhowmick, R. Raghavan, K. Chattopadhyay, and U. Ramamurty: Plastic flow softening in a bulk metallic glass. Acta Mater. 54, 4221 (2006).
19. W. C. Oliver and G. M. Pharr: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564 (1992).
20. U. Ramamurty, S. Jana, Y. Kawamura, and K. Chattopadhyay: Hardness and plastic deformation in a bulk metallic glass. Acta Mater. 53, 705 (2005).
21. L. M. Kachanov: Fundamentals of the Theory of Plasticity (Mir Publishers, Moscow, Russia, 1974), p. 22.
22. V. Keryvin, R. Crosnier, R. Laniel, V. H. Hoang, and J-C. Sangleboeuf: Indentation and scratching mechanisms of a ZrCuAlNi bulk metallic glass. J. Phys. D: Appl. Phys. 41, 074029 (2008).
23. G. S. Yu, J. G. Lin, M. Mo, X. F. Wang, F. H. Wang, and C. E. Wen: Effect of relaxation on pressure sensitivity index in a Zr-based metallic glass. Mater. Sci. Eng., A 460, 58 (2007).
24. A. S. Argon: Plastic deformation in metallic glass. Acta Metall. 27, 47 (1979).
25. C. A. Schuh, T. C. Hufnagel, and U. Ramammurty: Mechanical behavior of amorphous alloys. Acta Mater. 55, 4067 (2007).
26. A. Dubach, F. H. Dalla Torre, and J. F. Löffler: Constitutive model for inhomogeneous flow in bulk metallic glasses. Acta Mater. 57, 881 (2009).
27. D. I. Uhlenhaut, F. H. Dalla Torre, A. Castellero, C. A. P. Gomez, N. Djourelov, G. Krauss, B. Schmitt, B. Patterson, and J. F. Löffler: Structural analysis of rapidly solidified Mg-Cu-Y glasses during room-temperature embrittlement. Philos. Mag. 89, 233 (2009).
28. S. Xie and E. P. George: Hardness and shear band evolution in bulk metallic glasses after plastic deformation and annealing. Acta Mater. 56, 5202 (2008).
29. B-G. Yoo, K-W. Park, J-C. Lee, U. Ramamurty, and J-I. Jang: Role of free volume in strain softening of as-cast and annealed bulk metallic glass. J. Mater. Res. 24, 1405 (2009).
30. M. Dao, N. Chollacoop, KJ. Van Vliet, T. A. Venkatesh, and S. Suresh: Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater. 49, 3899 (2001).
31. F. Spaepen: A microscopic mechanism for steady state inhomogeneous flow in metallic glasses. Acta Metall. 25, 407 (1977).
32. K. Hajlaoui, T. Benameur, G. Vaughan, and A. R. Yavari: Thermal expansion and indentation-induced free volume in Zr-based metallic glasses measured by real-time diffraction using synchrotron radiation. Scr. Mater. 51, 843 (2004).
33. W. J. Wright, T. C. Hufnagel, and W. D. Nix: Free volume coalescence and void formation in shear bands in metallic glass. J. Appl. Phys. 93, 1432 (2003).
34. J. Li, Z. L. Wang, and T. C. Hufnagel: Characterization of nanometer-scale defects in metallic glasses by quantitative high-resolution transmission electron microscopy. Phys. Rev. B: Condens. Matter 65, 144201 (2002).
35. K. M. Flores, E. Sherer, A. Bharathula, H. Chen, and Y. C. Jean: Sub-nanometer open volume regions in a bulk metallic glass investigated by positron annihilation. Acta Mater. 55, 3403 (2007).
36. A. Y. Vinogradov and V. A. Khonik: Kinetics of shear banding in a bulk metallic glass monitored by acoustic emission measurements. Philos. Mag. 84, 2147 (2004).
37. B. Zberg, E. R. Arata, P. J. Uggowitzer, and J. F. Löffler: Tensile properties of glassy MgZnCa wires and reliability analysis using Weibull statistics. Acta Mater. 57, 3223 (2009).