Indentation of bulk metallic glasses: Relationships between shear bands observed around the prints and hardness

Acta Materialia

Volumn 55, Issue 8, 2007, Pages 2565-2578

  Keryvin, V ^a  

^a UNIVERSITÉ DE RENNES 1   (France)

Author keywords

Constraint factor; Finite element analysis; Hardness; Metallic glasses; Microindentation; Pressure sensitivity; Shear bands

Indexed keywords

AMORPHOUS ALLOYS; FINITE ELEMENT METHOD; HARDNESS; MICROHARDNESS; SHEAR BANDS; YIELD STRESS;

CONSTRAINT FACTOR; ELASTOPLASTIC REGIME; PRESSURE SENSITIVITY;

METALLIC GLASS;

EID: 34047142709     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actamat.2006.12.005     Document Type: Article

References (37)

1. Inoue A., Zhang T., and Masumoto T. Zr-Al-Ni amorphous alloys with high glass transition temperature and significant supercooled liquid region. Mater Trans JIM 31 3 (1990) 177
2. 22.5. Appl Phys Lett 63 (1993) 2342
3. Inoue A., Shen B., Koshiba H., Kato H., and Yavari A.R. Ultra-high strength above 5000 MPa and soft magnetic properties of Co-Fe-Ta-B bulk glassy alloys. Acta Mater 52 6 (2004) 1631
4. 3. Acta Mater 51 (2003) 1167
5. 5 bulk metallic glass due to heat-treatments below 540 °C. Scripta Mater 47 1 (2002) 19
6. Kim J.-J., Choi Y., and Suresh S. Nanocrystallization during nanoindentation of a bulk amorphous alloy at room temperature. Science 295 5555 (2002) 654
7. Golovin Y., Ivolgin V., Khonik V., Kitagawa K., and Tyurin A. Serrated plastic flow during nanoindentation of a bulk metallic glass. Scripta Mater 45 (2001) 947
8. Schuh C., Argon A., and Nieh T. The transition from localized to homogeneous plasticity during nanoindentation of an amorphous metal. Phil Mag 83 22 (2003) 2585
9. Vaidyanathan R., Dao M., Ravichandran G., and Suresh S. Study of mechanical deformation in bulk metallic glass through instrumented indentation. Acta Mater 49 (2001) 3781
10. 20 metallic glass under an indentor. J Mater Sci 24 (1989) 523
11. Jana S., Ramamurty U., Chattopadhyay Y., and Kawamura Y. Subsurface deformation during Vickers indentation of bulk metallic glasses. Mater Sci Eng A 375-377 (2004) 1191
12. Jana S., Bhowmick R., Kawamura Y., Chattopadhyay Y., and Ramamurty U. Deformation morphology underneath the Vickers indent in a Zr-based bulk metallic glass. Intermetallics 12 10-11 (2004) 1097
13. Ramamurty U., Jana S., Kawamura Y., and Chattopadhyay Y. Hardness and plastic deformation in a bulk metallic glass. Acta Mater 53 3 (2005) 705
14. Zhang H., Jing X., Subhash G., Kecskes L., and Dowding R. Investigation of shear band evolution in amorphous alloys beneath a Vickers indentation. Acta Mater 53 (2005) 3849
15. Su C., and Anand L. Plane strain indentation of a Zr-based metallic glass: Experiments and numerical simulation. Acta Mater 54 1 (2006) 179
16. Patnaik M., Narasimhan R., and Ramamurty U. Spherical indentation response of metallic glasses. Acta Mater 52 11 (2004) 3335
17. Nesterenko V. Dynamics of heterogeneous materials (2001), Springer
18. Nadai A. Theory of flow and fracture (1950), McGraw-Hill
19. Lawn B. Fracture of brittle solids (1993), Cambridge University Press
20. Guiberteau F., Padture N., and Lawn B. Effect of grain size on Hertzian contact damage in alumina. J Am Ceram Soc 77 7 (1994) 1825
21. 2. J Mater Res 15 4 (2000) 1025
22. Ji H., Keryvin V., Rouxel T., and Hammouda T. Densification of window under very high pressure and its relevance to Vickers indentation. Scripta Mater 55 (2006) 1159
23. Guin J.-P., Rouxel T., Sangleboeuf J.-C., Melscoet I., and Lucas J. Hardness, toughness, and scratchability of germanium-selenium chalcogenide glasses. J Am Ceram Soc 85 6 (2002) 1545
24. http://www.cast3m.cea.fr/cast3m/index.jsp.
25. Marsh D. Plastic flow in glass. Proc Royal Soc Lond A 10 (1964) 1071
26. Johnson K. Contact mechanics (1985), Cambridge University Press
27. Chiang S., Marshall D., and Evans A. The response of solids to elastic/plastic indentation. J Appl Phys 53 (1981) 298
28. Hill R. The mathematical theory of plasticity (1950), Clarendon Press, Oxford
29. 10. Scripta Mater 43 (2000) 1071
30. Lewandowski J., and Greer A. Temperature rise at shear bands in metallic glasses. Nature Mater 5 1 (2006) 15
31. Spaepen F. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses. Acta Metall 25 (1977) 407
32. Narasimhan R. Analysis of indentation of pressure sensitive plastic solids using the expanding cavity model. Mech Mater 36 (2004) 633
33. Cheng Y.-T., and Cheng C.-M. Scaling, dimensional analysis and indentation measurements. Mater Sci Eng R 44 (2004) 91
34. Lockett F. Indentation of a rigid/plastic material by a conical indenter. J Mech Phys Solids 11 (1963) 345
35. Ganneau F., Constantinides G., and Ulm F.-J. Dual-indentation technique for the assessment of strength properties of cohesive-frictional materials. Int J Sol Struct 43 6 (2006) 1727
36. 5 bulk metallic glass studied by in situ ultrasonic echography. Intermetallics 10 (2002) 1289
37. 20 bulk metallic glass in tension. Scripta Mater 46 1 (2002) 43