Dynamics of flow structures and transport phenomena, 2. relationship with design objectives and design optimization

Industrial and Engineering Chemistry Research

Volumn 48, Issue 17, 2009, Pages 8285-8311

  Mathpatii, Channamallikarjun S ^a   Tabib, Mandar V ^a   Deshpande, Sagar S ^a   Joshi, Jyeshtharaj B ^a  

^a INSTITUTE OF CHEMICAL TECHNOLOGY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL FLUID DYNAMICS TECHNIQUE; DESIGN OBJECTIVES; DESIGN OPTIMIZATION; DESIGN PARAMETERS; DISSIPATION RATES; ENERGY CONTENT; ENERGY INPUTS; EXPERIMENTAL FLUID DYNAMICS; HEAT AND MASS TRANSFER; HEURISTIC MODEL; MASS-TRANSFER COEFFICIENT; MIXING TIME; NEW THEORY; PENETRATION DEPTH; STEPWISE PROCEDURE; STRUCTURE DYNAMICS; STRUCTURE PROPERTY; TRANSPORT PHENOMENA;

COMPUTATIONAL FLUID DYNAMICS; DRAG; FLOW PATTERNS; FLOW STRUCTURE; FLUID DYNAMICS; HEAT TRANSFER; HEURISTIC METHODS; MASS TRANSFER; OPTIMIZATION; TRANSPORT PROPERTIES;

STRUCTURAL DESIGN;

EID: 69949146552     PISSN: 08885885     EISSN: None     Source Type: Journal    
DOI: 10.1021/ie900396k     Document Type: Review

References (141)

1. Joshi, J. B.; Doraiswamy, L. K. Chemical Reaction Engineering. In Albright's Chemical Engineering Handbook; Taylor and Francis, 2008.
2. Deckwer, W. D. Bubble Column Reactors; Wiley: Chichester, U.K., 1992.
3. Jakobsen, H. A.; Lindborg, H.; Dorao, C. A. Modeling of bubble column reactors: Progress and Limitations. Ind. Eng. Chem. Res. 2005, 44, 5107.
4. Lele, S. S. and Joshi, J. B. Hydrodynamics and Mass Transfer in Air-Lift Reactors. In Encyclopedia of Fluid Mechanics, Supplement 2; Cheremisinoff, N. P., Ed.; Gulf Publishing Co.: Houston, TX, 1993; pp 409 -510.
5. Joshi, J. B.; Sharma, M. M. Some Design Features of Radial Baffles in Sectionalized Bubble Columns. Can. J. Chem. Eng. 1979, 57, 375-377.
6. Laddha, G. S.; Degaleesan, T. E. Transport Phenomena in Liquid Extraction; Tata McGraw-Hill Publishing Co., Ltd.: New Delhi, India, 1976.
7. Thakur, R. K.; Vial, Ch.; Nigam, K. D. P.; Nauman, E. B.; Djelveh, G. Static Mixers in the Process Industries: A Review. Chem. Eng. Res. Des. 2003, 81 (7), 787-826.
8. Pedro, A.; Encina, G.; Fenrández-Polanco, F. Behaviour of an anaerobic expanded bed reactor in non-steady state conditions. Water Res. 1987, 21 (11), 1329-1334.
9. Kunii, D.; Levenspiel, O. Fluidization Engineering; Wiley: New York, 1969.
10. Werther, J. Modeling and scale-up of industrial fluidized bed reactors. Chem. Eng. Sci. 1980, 35 (1-2), 372-379. (Pubitemid 10464786)
11. Klamer, K.; van Krevelen, D. W. Ion exchange column: Studies on ion exchange-VI: Design and scaling up of ion exchange columns. Chem. Eng. Sci. 1958, 9 (1), 20-24.
12. Mujumdar, A. S., Ed. Handbook ofIndustrial Drying; CRC Press, Taylor and Francis Group: Boca Raton, FL, 2007.
13. Trambouze, P.; Landeghen, H. V.; Wauquier, J. P. Chemical Reactors: Design/Engineering/Operation; Gulf Publishing Company: Houston, TX, 1984.
14. Gungor, A.; Eskin, N. Hydrodynamic modeling of a circulating fluidized bed. Powder Technol. 2007, 172 (1), 1-13.
15. Federico, I.; Alesson, T. Falling film reactor: The modeling of falling film chemical reactors. Chem. Eng. Sci. 1999, 54 (12), 1871-1881.
16. Smith, R. A. Vaporisers: Selection, Design and Operation; Longman Scientific and Technical: Essex, England, 1986.
17. Leva, M. Tower Packings and Packed Tower Design; The United State Stoneware Company: Akron, OH, 1953.
18. Strigle R. F. Random Packings and Packed Towers: Design and Applications; Gulf Publishing Company: Houston, TX, 1987.
19. Schütz, J. Agitated film reactor: Agitated thin-film reactors and tubular reactors with static mixers for a rapid exothermic multiple reaction. Chem. Ens. Sci. 1988, 43 (8), 1975-1980.
20. Gianetto, A.; Specchia, V. Trickle bed reactors: state of art and perspectives. Chem. Eng. Sci. 1992, 47 (13-14), 3197-3213.
21. Holder, G. A.; Vaughan, G. Development of a Rational Approach to Trickling Filter Design. Stud. Environ. Sci. 1988, 34, 169-177.
22. Khalifeh, S., B.; Saffar-Avval, M.; Damangir, E. Minimizing capital and operating costs of shell and tube condensers using optimum baffle spacing. Appl. Therm. Eng. 2004, 24 (17-18), 2801-2810.
23. Fujie, K.; Bravo, H. E.; Kubota, H. Rotating disc contactor: Operational design and power economy of a rotating biological contactor. Water Res. 1983, 17 (9), 1153-1162.
24. Duong, D. D. Rotating basket reactor: Enzyme deactivation studies in a continuous stirred basket reactor. Chem. Eng. J. 1984, 28 (3), B51-B60.
25. Mathews, E. H.; Taylor, P. B.; Kleingeld, M.; O'Riordan, L. A New Concept Low-Cost Solar Water Heater; World Renewable Energy Congress VI, 2000; pp 1015-1018.
26. Varun, R. P.; Saini, S. K. Singal. Solar water/air heater: A review on roughness geometry used in solar air heaters. Solar Energy 2007, 81 (11), 1340-1350.
27. Spedding, P. L.; Jones, M. T. Wetted wall column: Heat and mass transfer in wetted-wall columns: I. Chem. Eng. J. 1988, 37 (3), 165-176.
28. Dehouche, Z.; Lieto, J. Wetted sphere contactor: Modelling and experimental study of key parameters of absorption on wetted sphere contactor. Chem. Eng. Sci. 1995, 50 (18), 2899-2909.
29. Yatmaz, H. C.; Wallis, C.; Howarth, C. R. The spinning disc reactor-studies on a novel TiO2 photocatalytic reactor. Chemosphere 2001, 42 (4), 397-403.
30. Shah, Y. T. Mechanically agitated contactors: Design Parameters for Mechanically Agitated Reactors. Adv. Chem. Eng. 1991, 17, 1-206.
31. Patwardhan, A. W.; Joshi, J. B. Design of Gas Inducing Reactors. Ind. Eng. Chem. Res. 1999, 37, 49-80.
32. Patil, S. S.; Deshmukh, N. A.; Joshi, J. B. Mass transfer characteristics of surface aerator and gas inducing impellers. Ind. Eng.Chem Res. 2004, 43, 2765-2774.
33. Deshmukh, N. A.; Joshi, J. B. Surface Aerators: Power Number, Mass Transfer Coefficient, Gas Hold Up Profile and Flow Patterns. Chem. Eng. Res. Des. 2006, 84, 977-992.
34. Kadam, B. D.; Joshi, J. B.; Koganti, S. B.; Patil, R. N. Hydrody-namic and Mass transfer characteristics of annular centrifugal extractors. Chem. Eng. Res. Des. 2008, 86, 233-244.
35. Bhutada, S. R.; Pangarkar, V. G. Solid suspension and mixing characteristics of liquid jet loop reactors. Chem. Eng. Sci. 1989, 44 (10), 2384-2387.
36. Bai, H.; Stephenson, A.; Jimenez, J.; Jewell, D.; Gillis, P. Modeling flow and residence time distribution in an industrial-scale reactor with a plunging jet inlet and optional agitation. Chem. Eng. Res. Des. 2008, 86 (12), 1462-1476.
37. Broadbent, T. Design fundamentals of centrifuges. Filtr. Sep. 1991, 28 (6), 381-383.
38. Kelleher, T.; Fair, J. R. Distillation Studies in a High-Gravity Contactor. Ind. Eng. Chem. Res. 1996, 35 (12), 4646-4655.
39. Joshi, J. B. Axial Mixing in Multiphase Contactors-A Unified Correlation. Trans. Inst. Chem. Eng. 1980, 58, 155-165.
40. Joshi, J. B. Solid-Liquid-Fluidised Beds- Some Design Aspects. Tran. Inst. Chem. Eng. 1983, 61A, 143-161.
41. Joshi, J. B. Computational flow modelling and design of bubble column reactors. Chem. Eng. Sci. 2001, 56, 5893-5933.
42. Pandit, A. B.; Joshi, J. B. Three Phase Sparged Reactors - Some Design Aspects. Rev. Chem. Ens. 1984, 2, 1-84.
43. Ranade, V. V.; Joshi, J. B. Transport Phenomena in MultiPhase Systems: Momemtum Mass and Heat Transfer in Bubble Column Reactors. In Proceedings of the Symposium on Transfer Process in Multiphase Systems; Banaras Hindu University (BHU): Varanasi, India, 1987; pp 113-196.
44. Joshi, J. B.; Shertukde, P. V.; Godbole, S. P. Modeling of Three Phase Sparged Catalytic Reactors. Rev. Chem. Ens. 1988, 6, 71-155.
45. Joshi, J. B.; Patil, T. A.; Ranade, V. V. Measurement of Hydro-dynamic Parameters in Multiphase Sparged Reactors. Rev. Chem. Ens. 1990, 6, 74-227.
46. Joshi, J. B.; Ranade, V. V.; Gharat, V. V.; Lele, S. S. Sparged Loop Reactors. Can. J. Chem. Eng. 1990, 68, 705-741.
47. Joshi, J. B.; Dinkar, M.; Deshpande, N. S.; Phanikumar, D. V.Hydrodynamic Stability of Multiphase Reactors. Adv. Chem. Eng. 2001, 26, 1-130.
48. Patwardhan, A. W.; Joshi, J. B. Relation Between Flow Pattern and Blending in Stirred Tanks. Ind. Eng. Chem. Res. 1999, 38, 3131-3143.
49. Patwardhan, A. W.; Pandit, A. B.; Joshi, J. B. The role of convection and turbulent dispersion in blending - I. Chem. Ens. Sci. 2003, 58, 2951-2962.
50. Patwardhan, A. W.; Pandit, A. B.; Joshi, J. B. The role of convection and turbulent dispersion in blending - II. Chem. Eng. Sci. 2004, 59, 729.
51. Ekambara, K.; Joshi, J. B. Axial mixing in pipe flows: turbulent and transition regions. Chem. Eng. Sci. 2003, 58, 2715-2724.
52. Baldi, G.; Conti, R.; Alaria, E. Complete suspension of particles in mechanically agitated vessels. Chem. Ens. Sci. 1978, 33, 21.
53. Nienow, A. W. Suspension of solid particles in turbine agitated baffled vessel. Chem. Eng. Sci. 1968, 23, 1453-1459.
54. Raghav Rao, K. S. M. S.; Rewatkar, V. B.; Joshi, J. B. Critical Impeller Speed for Solid Suspension in Mechanically Agitated Solid Liquid Contactors. AIChE J. 1988, 34, 1332-1340.
55. Danckwerts, P. V. Gas - Liquid Reactions; McGraw Hill Book Company: New York, 1970.
56. Treybal, R. E. Mass Transfer Operations; McGraw Hill International Editions: New Delhi, India, 1981.
57. Adrian, R. Twenty years of particle image velocimetry. Exp. Fluids 2005, 39 (2), 159-169.
58. Prasad, A. Stereoscopic particle image velocimetry. Exp. Fluids 2000, 29 (2), 103-116.
59. Elsinga, G.; Scarano, F.; Wieneke, B.; Van Oudheusden, B. Tomographic particle image velocimetry. Exp. Fluids 2006, 41 (6), 933-947.
60. Mullin, J.; Dahm, W. Dual-plane stereo particle image velocimetry (DSPIV) for measuring velocity gradient fields at intermediate and small scales of turbulent flows. Exp. Fluids 2005, 38 (2), 185-196.
61. Kevlahan, N.; Hunt, J.; Vassilicos, J. A comparison of different analytical techniques for identifying structures in turbulence. Appl. Sci. Res.1994, 53 (3-4), 339-355.
62. Deshpande, S. S.; Joshi, J. B.; Kumar, V. R.; Kulkarni, B. D.Identification and characterization of flow structures in chemical process equipment using multiresolution techniques. Chem. Eng. Sci. 2008, 63, 5330-5346.
63. Mathpati, C. S.; Joshi, J. B. Insight into theories of heat and mass transfer at the solid - fluid interface using direct numerical simulation and large eddy simulation. Ind. Eng. Chem. Res. 2007, 46, 8525-8557.
64. Lewis, W. K.; Whitman, W. G. Principles of gas adsorption. Ind. Eng. Chem. 1924, 16, 1215-1220.
65. Higbie, R. The rate of absorption of a pure gas into a still liquid during short periods of exposure. Trans. AIChE 1935, 31, 365-385.
66. Danckwerts, P. V. Significance of liquid film coefficient in gas. Ind. Eng. Chem. 1951, 43, 1460-1467.
67. Fortescue, G. E.; Pearson, J. R. A. On gas absorption into a turbulent liquid. Chem. Eng. Sci. 1967, 22, 1163-1176.
68. Lamont, J. C.; Scott, D. S. An eddy cell model of mass transfer into the surface of a turbulent liquid. AIChE J. 1970, 16, 512-519.
69. Banerjee, S.; Rhodes, E.; Scott, D. S. Mass transfer to falling wavy liquid films in turbulent flow. Ind. Eng. Chem. Fundam. 1968, 7, 22-27.
70. Luk, S.; Lee, Y. H. Mass transfer in eddies close to air-water interface. AIChE J. 1986, 32, 1546-1555.
71. Banerjee, S. Turbulence structure and transport mechanisms at interface. In Proceedinss ofthe 9th International Heat Transfer Conference, 1990; Vol.5, pp 395-418.
72. Gulawani, S.; Dahikar, S. K.; Mathpati, C. S.; Joshi, J. B.; Shah, M. S.; RamaPrasad, C. S.; Shukla, D. S. Analysis of flow pattern and heat transfer in direct contact condensation. Chem. Eng. Sci., 2009. In Press.
73. Deshpande, S. S.; Mathpati, C. S.; Gulawani, S. S.; Joshi, J. B.; Ravi Kumar, V. Effect of Flow Structures on Heat Transfer in Single and Multiphase Jet Reactors. Ind. Eng. Chem. Res. 2009, 48, 10.1021/iecr/iexxxxxxx.
74. Lu, S. S.; Willmarth, W. W. Measurements of the structure of the Reynolds stress in a turbulent boundary layer. J. Fluid Mech. 1973, 60, 481.
75. Wallace, J. W.; Eckelmann, H.; Brodkey, R. S. The wall region in turbulent shear flow. J. Fluid Mech. 1972, 54, 49.
76. Yuan, Y. M.; Mokhtarzadeh-Dehghan, M. R. A comparison study of conditional-sampling methods used to detect coherent structures in turbulent boundary layers. Phys. Fluids 1994, 6 (6), 2038-2057.
77. Willmarth, W. W.; Lu, S. S. Structure of the Reynolds stress near the wall. J. Fluid Mech. 1972, 54, 65-92.
78. Wallace, J. M.; Brodkey, R. S.; Bckelmann, H. Pattern-recognized structures in bounded turbulent shear flows. J. Fluid Mech. 1977, 83, 673.
79. Blackwelder, R. E.; Kaplan, R. E. On the bursting phenomenon near the wall in bounded turbulent shear flows. J. Fluid Mech. 1976, 76, 89.
80. Chen, C. P.; Blackwelder, R. F. The large scale motion in a turbulent boundary layer. J. Fluid Mech. 1978, 89, 1.
81. Brown, G. L.; Thomas, A. S. W. Large structure in a turbulent boundary layer. Phys. Fluids. 1977, 20, S243.
82. Liang, Z. C.; Yuan, Y. M. The coherent patterns of pressure fluctuations and their calculation. J. Hydraul. Eng. 1987, 11, 50.
83. Yuan, Y. M. Coherent patterns of pressure fluctuations and their calculation (in Chin.), M.S. Thesis, Wuhan Institute of Hydraulic and Electric Engineering, Wuhan, PRC, 1986.
84. Bisset, D. K.; Antonia, R. A.; Browne, L. W. B. Spatial organization of large structures in the turbulent far-wake of a cylinder. J. Fluid Mech.1990, 218, 438-461.
85. Bonnet, J. P.; Delville, J.; Glauser, M. N.; Antonia, R. A.; Bisset, D. K.; Cole, D. R.; Fiedler, H. E.; Garem, J. H.; Hilberg, D.; Jeong, J.;Kevlahan, N. K. R.; Ukeiley, L.; Vincendeau, E. Collaborative testing of eddy structure identification methods in free turbulent shear flows. Exp. Fluids 1998, 25, 197-225.
86. Alfredsson, P. H.; Johansson, A. V. On the detection of turbulence generating events. J. Fluid Mech. 1984, 139, 325.
87. Antonia, R. A. Conditional sampling in turbulence measurements. Ann. Rev. Fluid Mech. 1981, 13, 131.
88. Corino, R.; Brodkey, R. S. A visual study of turbulent shear flow. J. Fluid Mech. 1969, 37, 1.
89. Boivin, M.; Simonin, O.; Squires, K. D. Direct numerical simulation of turbulence modulation by particles in isotropic turbulence. J. Fluid Mech.1998, 375, 235-263. (Pubitemid 128488724)
90. Bunner, B.; Tryggvason, G. An Examination of the Flow Induced by Buoyant Bubbles. J. Visualization 1999, 2, 153-158.
91. Esmaeeli, A.; Tryggvason, G. Direct Numerical Simulations of Bubbly Flows. Part I - Low Reynolds Number Arrays. J.Fluid Mech. 1998, 377, 313-345.
92. Esmaeeli, A.; Tryggvason, G. Direct Numerical Simulations of Bubbly Flows. Part II - Moderate Reynolds Number Arrays. J. Fluid Mech.1999, 385, 325-358.
93. Esmaeeli, A.; Tryggvason, G. A DNS study of the buoyant rise of bubbles at O(100) Reynolds numbers. Phys. Fluids 2005, 17, 303-322.
94. Joshi, J. B.; Parasu, U. V.; Prasad, C. V. S.; Phanikumar, D. V.;Deshpande, N. S.; Thorat, B. N. Gas Hold-Up Structures in Bubble Column Reactors. PINSA-A: Proc. Indian Natl. Sci. Acad., Part A 1998, 64A, 441-567.
95. Pandit, A. B.; Joshi, J. B. Pressure Drop in Fixed, Expanded, Fluidised Beds and Packed Columns. Rev. Chem. Eng. 1998, 14, 321-371.
96. Bhole, M. R.; Joshi, J. B.; Ramkrishna, D. CFD simulation of bubble columns incorporating population balance modeling. Chem. Eng. Sci. 2008, 63, 2267-2282.
97. Kulkarni, A. A.; Joshi, J. B. Measurement of eddy diffusivity in bubble column and validation based on the intermittency models. Chem. Eng. Sci. 2005, 60, 6146-6159.
98. Pope, S. B. Turbulent Flows; Cambridge University Press: Cambridge, U.K., 2000.
99. Kang, H. S.; Chester, S.; Meneveau, C. Decaying turbulence in an active grid generated flow and comparisons with large eddy simulations. J. Fluid Mech. 2003, 480, 129-160.
100. Deshpande, S. S.; Sathe, M. J.; Joshi, J. B. Estimation of dissipation rate using advanced experimental techniques. Ind. Eng. Chem.Res., 2009. In Press.
101. Kulkarni, A. A.; Joshi, J. B. Simultaneous measurement of hold up profiles and interfacial area using LDA in bubble columns: predictions by multi-resolution analysis and comparison with experiments. Chem. Eng. Sci. 2003, 58, 1647-1648.
102. Pandit, A. B.; Joshi, J. B. Mixing in Mechanically Agitated Contactors, Bubble Columns and Modified Bubble Columns. Chem.Eng Sci. 1983, 38, 1189-1215.
103. Lele, S. S.; Joshi, J. B. Modeling of Air Lift Fluidized Beds and optimisation of mass transfer with respect to design and operational parameters. Chem. Eng. J. 1992, 49, 89-105.
104. Elias, C. B.; Joshi, J. B. Role of Hydrodynamic Shear on Structure and Activity of Proteins. Adv. Biochem. Eng. Biotech. 1997, 59, 47-71.
105. Ghadge, R. S.; Sawant, S. B.; Joshi, J. B. Enzyme deactivation in bubble column, a stirred vessel and an inclined plane. Chem. Eng. Sci. 2003, 58, 5125-5134.
106. Lele, S. S.; Joshi, J. B. Some Design Aspects of Air-Lift Fluidized Bed. Chem. Eng. J. 1994, 55, 145-146.
107. Mundale, V. D.; Joshi, J. B. Optimization of impeller design for gas inducing type mechanically agitated contactor. Can. J. Chem. Eng. 1995, 73, 161-172.
108. Joshi, J. B.; Patwardhan, A. W.; Patil, S. S. CFD Modeling for the Design of Hollow Pipe Gas Inducing Impellers. In Proceedings of 3rd International Symposium on Mixing in Industrial Processes, Society of Chemical Engineers: Tokyo, Japan, 1999.
109. Murthy, B. N.; Deshmukh, N.; Patwardhan, A. W.; Joshi, J. B.Hollow Self Inducing Impellers: Flow Visualisation and CFD Simulation.Chem. Eng. Sci. 2007, 62, 3839-3848.
110. Murthy, B. N.; Deshmukh, N. A.; Patwardhan, A. W.; Joshi, J. B.Hollow Self-Inducing Impellers: Flow Visualization and CFD Simulation - II. Chem. Eng. Sci. 2008, 63, 4031-4032.
111. Murthy, B. N.; Kasundra, R. B.; Joshi, J. B. Hollow Self Inducing Impeller for Gas- Liquid- Solid Dispersion: Experimental and Computational Study. Chem. Eng. J. 2008, 141, 332-345.
112. Joshi, J. B.; Sharma, M. M. Mass Transfer and Hydrodynamic Characteristics of Gas Inducing Type of Agitated Contactors. Can. J. Chem.Eng. 1977, 55, 683-695.
113. Sawant, S. B.; Joshi, J. B. Critical Impeller Speed for the Onset of Gas Induction in Gas Inducing Types of Agitated Contactors. Chem.Eng. J. 1979, 18, 87-91.
114. Joshi, J. B. Modifications in the design of Gas Inducing Impellers. Chem. Eng. Commun. 1980, 5, 213-218.
115. Sawant, S. B.; Joshi, J. B.; Pangarkar, V. G.; Mhaskar, R. D. Mass Transfer Hydrodynamic Characteristics of Denver type of Flotation Cells. Chem. Eng. J. 1981, 21, 11-19.
116. Raidoo, A. D.; Raghava Rao, K. S. M. S.; Joshi, J. B. Improvement in the Gas Inducing Impeller Design. Chem. Eng. Commun. 1987, 39, 43-66.
117. Saravanan, K.; Mundale, V. D.; Joshi, J. B. Gas Inducing Type of Agitated Contactors. Ind. Eng. Chem. Res. 1994, 33, 2226-2241.
118. Sarvanan, K.; Joshi, J. B. Fractional Gas Hold-up in Gas Inducing Type of Mechanically Agitated Reactors. Can. J. Chem. Eng. 1996, 74, 16-30.
119. Sarvanan, K.; Mundale, V. D.; Patwardhan, A. W.; Joshi, J. B.Power Consumption in Gas Inducing Type Mechanically Agitated Reactors.Ind. Eng. Chem. Res. 1996, 35, 1583-1602.
120. Patwardhan, A. W.; Joshi, J. B. Hydrodynamic Characteristics of Mechanically Agitated Gas- Liquid Reactors Provided with Gas Inducing Impellers. Ind. Eng. Chem. Res. 1997, 36, 3904-3914.
121. Sarvanan, K.; Patwardhan, A. W.; Joshi, J. B. Critical Impeller Speed for Solid Suspension in Gas Inducing Type of Agitated Contactors.Can. J. Chem. Eng. 1997, 75, 664-676.
122. Patwardhan, A. W.; Joshi, J. B. Design of stirred vessels with gas entrained from free liquid surface. Can. J. Chem. Eng. 1998, 76, 339-364.
123. Patil, S. S.; Joshi, J. B. Optimum Design of Stator-Rotor Assembly in Gas Inducing Type Mechanically Agitated Reactors. Chem. Eng.Commun. 1999, 174, 215-231.
124. Patil, S. S.; Joshi, J. B. Stability of Gas Inducing Type Impellers.Can. J. Chem. Eng. 1999, 55, 793-803.
125. Patil, S. S.; Joshi, J. B. Optimum Design of Multiple Impeller Self-Inducing System. Ind. Eng. Chem. Res. 2003, 42, 1261-1265.
126. Patil, S. S.; Mundale, V. D.; Joshi, J. B. Mechanism of Gas Induction in a Self-Inducting Impeller. Ind. Eng. Chem. Res. 2005, 44, 1322-1328.
127. Deshmukh, N. A.; Patil, S. S.; Joshi, J. B. Gas Induction Characteristics of Hollow Self-Inducing Impellers. Chem. Eng. Res. Des.2006, 84, 124-132.
128. Kasundra, R. B.; Kulkarni, A. V.; Joshi, J. B. Hydrodynamic and Mass Transfer Characteristics of Single and Multiple Impeller Hollow Self-Inducing Reactors. Ind. Eng. Chem. Res. 2008, 47, 2829-2841.
129. Evans, G. M.; Rielly, C. D.; Davidson, J. F.; Carpenter, K. J.Fundamental study of gas-inducing impeller design. Inst. Chem. Eng. Symp.Ser. 1990, 121, 137-152.
130. Rielly, C. D.; Evans, G. M.; Davidson, J. F.; Carpenter, K. J. Effect of vessel scale-up on the hydrodynamics of a self-aerating concave blade impeller. Chem. Eng. Sci. 1992, 47 (13-14), 3395-3402.
131. Rigby, G. D.; Evans, G. M. CFD simulation of gas dispersion dynamics in liquid cross-flows. Appl. Math. Model. 1998, 22 (10), 799-810.
132. Rigby, G. D.; Evans, G. M.; Jameson, G. J. The effect of liquid cross-flow on the modeling of gas flow from an orifice located in the wake of a bluff body. Powder Technol. 1996, 88 (1), 21-26.
133. Eiamsa-ard, S.; Promvonge, P. Experimental investigation of heat transfer and friction characteristics in a circular tube fitted with V-nozzle turbulators. Int. Commun. Heat Mass Transfer 2006, 33, 591-600.
134. Yakut, K.; Bayram Sahin, B.; Canbazoglu, S. Performance and flow-induced vibration characteristics for conical-ring turbulators. Appl.Energy 2004, 79, 65-76.
135. Dong, H. H.; Lee, K. J. Single-phase heat transfer and flow characteristics of micro-fin tubes. Appl.Therm.Eng. 2005, 25, 1657-1669.
136. Sivashanmugam, P.; Suresh, S. Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with helical screw-tape inserts. Chem. Eng. Process. 2007, 46, 1292-1298. (Pubitemid 47532242)
137. Vicente, P. G.; Garcia, A.; Viedma, A. Experimental investigation on heat transfer and frictional characteristics of spirally corrugated tubes in turbulent flow at different Prandtl numbers. Int. J. Heat Mass Transfer 2004, 47, 671-681.
138. Coulson and Richardson's Chemical Engineering, Vol.2: Particle Technology and Separation Processes; Butterworth- Heinemann: Boston, MA, 2002; p 216.
139. Schultes, M. Raschig super-ring: A New Fourth Generation Packing Offers New Advantages. Trans. Inst. Chem. Eng. 2003, 81A, 48-57.
140. Joshi, J. B.; Tabib, M. V.; Deshpande, S. S.; Mathpati, C. S. Dynamics of Flow Structures and Transport Phenomena, 1. Experimental and Numerical Techniques for Identification and Energy Content of Flow Structures. Ind. Eng. Chem. Res. 2009, 48, 10.1021/iecr/ie8012506.
141. Gandhi, A. B.; Gupta, P. P.; Joshi, J. B.; Jayaraman, V. K.; Kulkarni, B. D. Development of Unified Correlations for Volumetric Mass- Transfer Coefficient and Effective Interfacial Area in Bubble Column Reactors for Various Gas-Liquid Systems Using Support Vector Regression. Ind. Eng. Chem. Res. 2009, 10.1021/iecr/ie8003489.