Characterization of PVDF-PFSA hollow fiber UF blend membrane with low-molecular weight cut-off

Separation and Purification Technology

Volumn 69, Issue 2, 2009, Pages 141-148

  Yuan, Guo Lin ^a,b   Xu, Zhen Liang ^a,b   Wei, Yong Ming ^b  

^a EAST CHINA UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^b UNILAB Research Center of Chemical Reaction Engineering   (China)

Author keywords

Blend; Perfluorosulfonic acid; Polyvinylidene fluoride; Ultrafiltration

Indexed keywords

BLEND; BLEND MEMBRANES; COAGULATION KINETICS; CROSS SECTION; DOPE SOLUTION; ETHANOL CONCENTRATIONS; HOLLOW FIBER; LIGHT TRANSMITTANCE; LOW-MOLECULAR WEIGHT; MACROVOIDS; MOLECULAR WEIGHT CUTOFF; PERFLUOROSULFONIC ACID; POLYVINYLIDENE FLUORIDE; POLYVINYLIDENE FLUORIDES; PURE WATER; SEM; SPONGELIKE STRUCTURE; WATER PERMEATION; WET-SPINNING METHOD;

ACIDS; COAGULATION; ETHANOL; MOLECULAR WEIGHT; MORPHOLOGY; PERMEATION; POLYACRYLONITRILES; PORE SIZE; SCANNING ELECTRON MICROSCOPY; SPINNING (FIBERS); ULTRAFILTRATION;

MEMBRANES;

EID: 69749090197     PISSN: 13835866     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.seppur.2009.07.011     Document Type: Article

References (37)

1. Jian K., and Pintauro P.N. Integral asymmetric poly(vinylidene fluoride) (PVDF) pervaporation membranes. J. Membr. Sci. 85 (1993) 301-309
2. Yang J., Li W., Lin Y.K., Wang X.L., Tian F., and Wang Z. Formation of a bicontinuous structure membrane of polyvinylidene fluoride in diphenyl ketone diluent via thermally induced phase separation. J. Appl. Polym. Sci. 110 (2008) 341-347
3. Cha B.J., and Yang J.M. Preparation of poly(vinylidene fluoride) hollow fiber membranes for microfiltration using modified TIPS process. J. Membr. Sci. 291 (2007) 191-198
4. Tian X.Z., Jiang X., Zhu B.K., and Xu Y.Y. Effect of the casting solvent on the crystal characteristics and pervaporative separation performances of P(VDF-co-HFP) membranes. J. Membr. Sci. 279 (2006) 479-486
5. Yeow M.L., Liu Y.T., and Li K. Morphological study of poly(vinylidene fluoride) asymmetric membranes: effects of the solvent, additive, and dope temperature. J. Appl. Polym. Sci. 92 (2004) 1782-1789
6. Wang D.L., Li K., and Teo W.K. Preparation and characterization of polyvinylidene fluoride (PVDF) hollow fiber membranes. J. Membr. Sci. 163 (1999) 211-220
7. Huang R.Y.M., Pal R., and Moon G.Y. Pervaporation dehydration of aqueous ethanol and isopropanol mixtures through alginate/chitosan two ply composite membranes supported by poly(vinylidene fluoride) porous membrane. J. Membr. Sci. 167 (2000) 275-289
8. Jian K., and Pintauro P.N. Asymmetric PVDF hollow-fiber membranes for organic/water pervaporation separations. J. Membr. Sci. 135 (1997) 41-53
9. Liu J.Q., Xu Z.L., Li X.H., Zhang Y., Zhou Y., Wang Z.X., and Wang X.J. An improved process to prepare high separation performance PA/PVDF hollow fiber composite nanofiltration membranes. Sep. Purif. Technol. 58 (2007) 53-60
10. Kochkodan V., Weigel W., and Ulbricht M. Molecularly imprinted composite membrane for selective binding of desmetryn from aqueous solutions. Desalination 149 (2002) 323-328
11. Jansen R.H.S., Rijk J.W., Zwijnenburg A., Mulder M.H.V., and Wessling M. Hollow fiber membrane contactors-a means to study the reaction kinetics of humic substance ozonation. J. Membr. Sci. 257 (2005) 48-59
12. Cao J.H., Zhu B.K., and Xu Y.Y. Structure and ionic conductivity of porous polymer electrolytes based on PVDF-HFP copolymer membranes. J. Membr. Sci. 281 (2006) 446-453
13. Ochoa N.A., Masuelli M., and Marchese J. Effect of hydrophilicity on fouling of an emulsified oil wastewater with PVDF/PMMA membranes. J. Membr. Sci. 226 (2003) 203-211
14. Nunes S.P., and Peinemann K.V. Ultrafiltration membranes from PVDF/PMMA blends. J. Membr. Sci. 73 (1992) 25-35
15. Wootthikanokkhan J., and Seeponkai N. Methanol permeability and properties of DMFC membranes based on sulfonated PEEK/PVDF blends. J. Appl. Polym. Sci. 102 (2006) 5941-5947
16. Liu T.Y., Lin W.C., Huang L.Y., Chen S.Y., and Yang M.C. Surface characteristics and hemocompatibility of PAN/PVDF blend membranes. Polym. Adv. Technol. 16 (2005) 413-419
17. Wu L.S., Sun J.F., and Wang Q.R. Poly(vinylidene fluoride)/polyethersulfone blend membranes: effects of solvent sort, polyethersulfone and polyvinylpyrrolidone concentration on their properties and morphology. J. Membr. Sci. 285 (2006) 290-298
18. ®/poly(vinylidene fluoride) blend ionomers for proton exchange membrane fuel cells. J. Power. Sources 117 (2003) 14-21
19. Cho K.Y., Eom J.Y., Jung H.Y., Choi N.S., Lee Y.M., Park J.K., Choi J.H., Park K.W., and Sung Y.E. Characteristics of PVDF copolymer/Nafion blend membrane for direct methanol fuel cell (DMFC). Electrochim. Acta 50 (2004) 583-588
20. Lang W.Z., Xu Z.L., Yang H., and Tong W. Preparation and characterization of PVDF-PFSA blend hollow fiber UF membrane. J. Membr. Sci. 288 (2007) 123-131
21. Wang D.L., Li K., and Teo W.K. Porous PVDF asymmetric hollow fiber membranes prepared with the use of small molecular additives. J. Membr. Sci. 178 (2000) 13-23
22. Khayet M., Feng C.Y., Khulbe K.C., and Matsuura T. Study on the effect of a non-solvent additive on the morphology and performance of ultrafiltration hollow-fiber membranes. Desalination 148 (2002) 321-327
23. Yeow M.L., Liu Y.T., and Li K. Isothermal phase diagrams and phase-inversion behavior of poly(vinylidene fluoride)/solvents/additives/water systems. J. Appl. Polym. Sci. 90 (2003) 2150-2155
24. 4/water/DMF/PVDF system. Polymer 44 (2003) 413-422
25. Shi L., Wang R., Cao Y.M., Liang D.T., and Tay D.H. Effect of additives on the fabrication of poly(vinylidene fluoride-co-hexafluropropylene) (PVDF-HFP) asymmetric microporous hollow fiber membranes. J. Membr. Sci. 315 (2008) 195-204
26. Xu Z.L., Chung T.S., and Huang Y. Effect of polyvinylpyrrolidone molecular weights on morphology, oil/water separation, mechanical and thermal properties of polyetherimide/polyvinylpyrrolidone hollow fiber membranes. J. Appl. Polym. Sci. 74 (1999) 2220-2233
27. Xu Z.L., and Qusay F.A. Polyethersulfone (PES) hollow fiber ultrafiltration membranes prepared by PES/non-solvent/NMP solution. J. Membr. Sci. 233 (2004) 101-111
28. Mulder M. Basic Principle of Membrane Technology (1996), Kluwer Academic, Boston
29. Li J.F., Xu Z.L., Yang H., Feng C.P., and Shi J.H. Hydrophilic microporous PES membranes prepared by PES/PEG/DMAc casting solutions. J. Appl. Polym. Sci. 107 (2008) 4100-4108
30. Susanto H., Feng Y., and Ulbricht M. Fouling behavior of aqueous solutions of polyphenolic compounds during ultrafiltration. J. Food Eng. 91 (2009) 333-340
31. Yang Q., Chung T.S., and Santoso Y.E. Tailoring pore size and pore size distribution of kidney dialysis hollow fiber membranes via dual-bath coagulation approach. J. Membr. Sci. 290 (2007) 153-163
32. Wang K.Y., Matsuura T., Chung T.S., and Guo W.F. The effects of flow angle and shear rate within the spinneret on the separation performance of poly(ethersulfone) (PES) ultrafiltration hollow fiber membranes. J. Membr. Sci. 240 (2004) 67-79
33. Michaels A.S. Analysis and prediction of sieving curves for ultrafiltration membranes-a universal correlation. Sep. Sci. Technol. 15 (1980) 1305-1322
34. Youm K.H., and Kim W.S. Prediction of intrinsic pore properties of ultrafiltration membrane by solute rejection curves: effects of operating conditions on pore properties. J. Chem. Eng. Jpn. 24 (1991) 1-7
35. Legras M., Hirata Y., Nguyen Q.T., Langevin D., and Métayer M. Sorption and diffusion behaviors of water in Nafion 117 membranes with different counter ions. Desalination 147 (2002) 351-357
36. Paddison S.J., and Elliott J.A. On the consequences of side chain flexibility and backbone conformation on hydration and proton dissociation in perfluorosulfonic acid membranes. Phys. Chem. Chem. Phys. 8 (2006) 2193-2203
37. Brandrup J., and Immergut E.H. Polymer Handbook (1999), Wiley, New Work