Modeling strain and anisotropy along the alpine fault, South Island, New Zealand

Geophysical Monograph Series

Volumn 175, Issue , 2007, Pages 289-305

  Savage, M K ^a   Tommasi, A ^b   Ellis, S ^c   Chery, J ^b  

^a VICTORIA UNIVERSITY OF WELLINGTON   (New Zealand)

^b UNIV MONTPELLIER   (France)

^c GNS SCIENCE   (New Zealand)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 69549143357     PISSN: 00658448     EISSN: 23288779     Source Type: Book Series    
DOI: 10.1029/175GM15     Document Type: Chapter

References (56)

1. Audoine, E., M. K. Savage, and K. Gledhill (2000), Seismic anisotropy from local earthquakes in the transition region from a subduction to a strike-slip plate boundary, New Zealand, J. Geophys. Res., 105, 8013-8033.
2. Babuska, V., and M. Cara (1991), Seismic Anisotropy in the Earth, 217 pp., Kluwer Academic Publishers, Dordrecht/Boston/ London.
3. Bai, Q., S. J. Mackwell, and D. L. Kohlstedt (1991), Hightemperature creep of olivine single crystals,1, Mechanical results for buffered samples, J. Geophys. Res., 96, 2441-2463.
4. Baldock, G., and T. Stern (2005), Width of mantle deformation across a continental transform: Evidence from upper mantle (Pn) seismic anisotropy measurements, Geology, 33, 741-744.
5. Beavan, J., S. Ellis, L. Wallace, and P. Denys (Eds.) (2006), Kinematic Constraints from GPS on Oblique Convergence of the Pacific and Australian Plates, Central South Island, New Zealand, in revision pp.
6. Blackman, D. K., J.-M. Kendall, P. R. Dawson, H.-R. Wenk, D. Boyce, and J. P. Morgan (1996), Teleseismic imaging of subaxial flow at mid-ocean ridges: travel-time effects of anisotropic mineral texture in the mantle, Geophys. J. Int., 127, 415-426.
7. Bourguignon, S., T. A. Stern, and M.K. Savage (2007), Crust and mantle thickening beneath the southern portion of the Southern Alps, New Zealand, Geophys. J. Int., 168, 681-690
8. Bystricky, M., K. Kunze, L. Burlini, and J.-P. Burg (2000), High shear strain of olivine aggregates: rheological and seismic consequences, Science, 290, 1564-1567.
9. Cande, S. C., and J. M. Stock (2004), Pacific-Antarctic-Australia motion and the formation of the Macquarie Plate, Geophys. J. Int., 157, 399-414 doi:310.1111/j.1365-1246X.2004.02224.x.
10. Chéry, J., M. D. Zoback, and S. Hickman (2004), A mechanical model of the San Andreas fault and SAFOD pilot hole stress measurements, Geophys. Res. Lett., 31, doi:10.1029/2004GL019521.
11. Chopra, P. N., and M. S. Paterson (1984), The role of water in the deformation of dunite, J. Geophys. Res., 89, 7861-7876.
12. Cundall, P. A. (1988), Formulation of a three-dimensional distinct element model; Part I, A scheme to detect and represent contacts in a system composed of many polyhedral blocks International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 25, 107-116.
13. Duclos, M. (2005), Insights on Plate Boundary Deformation from Seismic Anisotropy in the New Zealand Upper Mantle, 210 pp, Victoria University of Wellington, Wellington, New Zealand.
14. Duclos, M., M. K. Savage, A. Tommasi, and K. R. Gledhill (2005), Mantle Tectonics beneath New Zealand Inferred from SKS Splitting and Petrophysics, Geophys. J. Int., 163, 760-774, doi:710.1111/j.1365-1246X.2005.02793.x.
15. Ellis, S., J. Beavan, and D. Eberhart-Phillips (2006), Bounds on the width of mantle lithosphere flow derived from surface geodetic measurements: application to the central Southern Alps, New Zealand, Geophysical Journal International, doi: 10.1111/ j.1365-1246X.2006.02918.x.
16. Fischer, K. M., E. M. Parmentier, A. R. Stine, and E. R. Wolf (2000), Modeling anisotropy and plate-driven flow in the Tonga subduction zone back arc, J. Geophys. Res., 105, 16,181-16,192.
17. Gerbault, M., Henrys, S., and Davey, F.J. (2003), Numerical models of lithospheric deformation forming the Southern Alps of New Zealand, J. Geophys. Res., 108, 2341: doi:2310.1029/ 2001JB001716.
18. Houseman, G. A., and P. Molnar (1997), Gravitational (Rayleigh-Taylor) instability of a layer with non-linear viscosity and convective thinning of continental lithosphere, Geophys. J. Int., 128, 125-150.
19. Kennett, B. L. N., E. R. Engdahl, and R. Buland (1995), Constraints on seismic velocities in the Earth from traveltimes, Geophys. J. Int., 122, 108-124.
20. Klosko, E. R., F. T. Wu, H. J. Anderson, D. Eberhardt-Phillips, T. V. McEvilly, E. Audoine, M. K. Savage, and K. R. Gledhill (1999), Upper mantle anisotropy in the New Zealand region, Geophys. Res. Lett., 26, 1497-1500.
21. Kohler, M. D., and D. Eberhart-Phillips (2002), Three-dimensional lithospheric structure below the New Zealand Southern Alps, J. Geophys. Res., 107, 2225, doi:2210.1029/2001JB000182.
22. Kreemer, C., W.E. Holt, and A. J. Haines (2003), An integrated global model of present-day plate motions and plate boundary, Geophys. J. Int., 154, 8-34.
23. Kumazawa, M., and D. L. Anderson (1969), Elastic moduli, pressure derivatives, and temperature derivatives of single-crystal olivine and single-crystal forsterite, J. Geophys. Res., 74, 5961-5972.
24. Lebensohn, R. A., and C. N. Tomé (1993), A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polyscrystals: application to zerconion alloys, Acta Metall. Mater., 41, 2611-2624.
25. Leroy, Y., and M. Ortiz (1989), Finite element analysis of strain localization in frictional materials, Int. J. Numer. Anal. Methods Geomech., 13, 53-74.
26. Little, T. A., M. K. Savage, and B. Tikoff (2002), Relationship between crustal finite strain and seismic anisotropy in the mantle, Pacific-Australia plate boundary zone, South Island, New Zealand, Geophys. J. Int., 151, 106-116.
27. Liu, Z., and P. Bird (2006), 2-D and 3-D finite element modeling of mantle processes beneath central South Island, New Zealand, Geophys. J. Int., 165, 1003-1028.
28. Mainprice, D. (1990), A FORTRAN program to calculate seismic anisotropy from lattice preferred orientation of minerals, Comput. Geosci., 16, 385-393.
29. Molnar, P., H. Anderson, E. Audoine, D. Eberhart-Philips, K. Gledhill, E. Klosko, T. McEvilly, D. Okaya, M. Savage, T. Stern, and F. Wu (1999), Continuous deformation versus faulting through the continental lithosphere of New Zealand, Science, 286, 516-519.
30. Molnar, P., G. A. Houseman, and C. P. Conrad (1998), Rayleigh-Taylor instability and convective thinning of mechanically thickened lithosphere: effects of non-linear viscosity decreasing exponentially with depth and of horizontal shortening of the layer, Geophys. J. Int., 133, 568-584.
31. Moore, M., P. England, and B. Parsons (2002), Relation between surface velocity field and shear-wave splitting in the South Island of New Zealand, J. Geophys. Res., 107, 2198, doi:2110.1029/ 2000JB000093.
32. Norris, R. J., and A. F. Cooper (2001), Late Quaternary slip rates and slip partitioning on the Alpine Fault, New Zealand J. Structural Geol., 23, 507-520.
33. Norris, R. J., and A. F. Cooper (2003), Very high strains recorded in mylonites along the Alpine Fault, New Zealand; implications for the deep structure of plate boundary faults., Journal of Structural Geology, 25, 2141-2157.
34. Paterson, M. S., and F. C. Luan (1990), Quartzite rheology under geological conditions, in Deformation mechanisms, rheology and tectonics edited by R. J. R. Knipe, E H pp. 299-307, Geological Society Special Publications, Leeds, United Kingdom.
35. Pysklywec, R. N., Beaumont, C., and Fullsack, P. (2002), Lithospheric deformation during the early stages of continental collision: Numerical experiments and comparison with South Island, New Zealand, J. Geophys. Res., 107, doi:10.1029/2001JB000252.
36. Savage, M. K. (1999), Seismic anisotropy and mantle deformation: what have we learned from shear wave splitting?, Rev. Geophys., 37, 65-106.
37. Savage, M. K., M. Duclos, and K. A. Marson-Pidgeon (2007), Seismic anisotropy in the South Island, New Zealand, this volume.
38. Savage, M. K., K. M. Fischer, and C. E. Hall (2004), Strain modelling, seismic anisotropy and coupling at strike-slip boundaries: Applications in New Zealand and the San Andreas Fault, in Vertical Coupling and Decoupling in the Lithosphere, edited by J. Grocott, Tikoff, B., McCaffrey, K. J. W. and Taylor, G., pp. 9-40, Geological Society of London, Special Publication, London.
39. Scherwath, M., T. Stern, F. Davey, D. Okaya, W. S. Holbrook, R. Davies, and S. Kleffmann (2003), Lithospheric structure across oblique continental collision in New Zealand from wide-angle P wave modeling J. Geophys. Res., 108, 18 pp., doi:10.1029/ 2002JB002286.
40. Scherwath, M., T. Stern, A. Melhuish, and P. Molnar (2002), Pn anisotropy and distributed upper mantle deformation associated with a continental transform fault, Geophys. Res. Lett., 29, 16-11-16-14, doi:10.1029/2001GL014179.
41. Shi, Y., R. Allis, and F. Davey (1996), Thermal modelling of the Southern Alps, PAGEOPH, 146, 469-501.
42. Silver, P. G. (1996), Seismic anisotropy beneath the continents: probing the depths of geology, Ann. Rev. Earth Planet. Sci., 24, 385-432.
43. Silver, P. G., and W. W. Chan (1991), Shear wave splitting and subcontinental mantle deformation, J. Geophys. Res., 96, 16,429-16,454.
44. Smith, G. P., and G. Ekstrom (1999), A global study of Pn anisotropy beneath continents, J. Geophys. Res., 104, 963-980.
45. Stern, T., D. A. Okaya, and M. Scherwath (2002), Structure and strength of a continental transform from onshore-offshore seismic profiling of South Island, New Zealand, Earth, Planets, Space, 54, 1011-1019.
46. Stern, T. A., P. Molnar, D. Okaya, and D. Eberhart-Phillips (2000), Teleseismic P wave delays and modes of shortening the mantle lithosphere beneath South Island, New Zealand, J. Geophys. Res., 105, 21,615-21,631.
47. Sutherland, R. (1999), Cenozoic bending of New Zealand basement terranes and Alpine Fault displacement: a brief review, N.Z. Joul. Geol. and Geophys., 42, 295-302.
48. Tommasi, A., D. Mainprice, G. Canova, and Y. Chastel (2000), Viscoplastic self-consistent and equilibrium-based modeling of olivine lattice preferred orientations: Implications for the upper mantle seismic anisotropy, J. Geophys. Res., 105, 7893-7908.
49. Tommasi, A., B. Tikoff, and A. Vauchez (1999), Upper mantle tectonics: three-dimensional deformation, olivine crystalographic fabrics and seismic properties, Earth and Planet. Science Lett, 168, 173-186.
50. Turcotte, D. L., and G. Schubert (1982), Geodynamics: Applications of Continuum Physics to Geological Problems, 450 pp., John Wiley and Sons, New York.
51. van Avendonk, H. J. A., W. S. Holbrook, D. A. Okaya, J. K. Austin, F. Davey, and T. Stern (2004), Continental crust under compression: A seismic refraction study of South Island Geophysical Transect I, South Island, New Zealand, J. Geophys. Res., 109, doi:10.1029/2003JB002790.
52. Walcott, R. I. (1998), Modes of oblique compression: late Cenozoic tectonics of the South Island of New Zealand., Rev. Geophys., 36, 1-26.
53. Wallace, L. M., J. Beavan, R. McCaffrey, and K. Berryman (2007), Balancing the plate motion budget in the South Island, New Zealand, using GPS, geological and seismological data, Geophys. J. Int., 168, 332-52; doi:10.111/j-1365.
54. Wellman, H. W. (1979), An uplift map for the South Island of New Zealand, Bull. Roy. Soc. N.Z., 18, 13-20.
55. Wenk, H.-R., K. Bennett, G. R. Canova, and A. Molinari (1991), Modelling plastic deformation of peridotite with the self-consistent theory, J. Geophys. Res., 96, 8337-8349.
56. Zhang, S., and S.-I. Karato (1995), Lattice preferred orientation of olivine aggregates deformed in simple shear, Nature, 375, 774-777.