On the wide range of mechanical properties of ZTA and ATZ based dental ceramic composites by varying the Al2O3 and ZrO2 content

International Journal of Refractory Metals and Hard Materials

Volumn 27, Issue 6, 2009, Pages 962-970

  Nevarez Rascon, A ^a   Aguilar Elguezabal, A ^b   Orrantia, E ^b   Bocanegra Bernal, M H ^b  

^a UNIVERSIDAD AUTÓNOMA DE CHIHUAHUA   (Mexico)

^b CENTRO DE INVESTIGACIÓN EN MATERIALES AVANZADOS   (Mexico)

Author keywords

Alumina Toughened Zirconia; Fracture toughness; Hardness; Zirconia Toughened Alumina

Indexed keywords

ALUMINA GRAINS; ALUMINA TOUGHENED ZIRCONIA; AVERAGE GRAIN SIZE; CERAMIC COMPOSITES; DENTAL APPLICATIONS; DENTAL CERAMIC; GRAIN SIZE; GREEN COMPACTS; HARDNESS VALUES; HIGH HARDNESS; INTERNATIONAL STANDARDS; PRESSURELESS SINTERING; PURE AL; RELATIVE DENSITY; RESIDUAL POROSITY; SUBMICRON GRAINS; ZIRCONIA TOUGHENED ALUMINA;

ALUMINUM; CERAMIC MATERIALS; DENTAL COMPOSITES; FRACTURE; GRAIN BOUNDARIES; GRAIN GROWTH; GRAIN SIZE AND SHAPE; MECHANICAL PROPERTIES; POWDER METALLURGY; SINTERING; VICKERS HARDNESS; ZIRCONIA; ZIRCONIUM ALLOYS;

FRACTURE TOUGHNESS;

EID: 69349101831     PISSN: 02634368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijrmhm.2009.06.001     Document Type: Article

References (60)

1. Linkevicius T., Vladimirovas E., Grybauskas S., Puisys A., and Rutkunas V. Venner fracture in implant-supported metal-ceramic restorations: part I: overall success rate and impact of occlusal guidance. Stomatologija, Baltic Dental Maxillofacial J 10 (2008) 133-139
2. Guazzato M., Albakry M., Ringer S.P., and Swain M.V. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 20 (2004) 449-456
3. Garvie R.C., Hannink R.H., and Pascoe R.T. Ceramic steel?. Nature 258 (1975) 703-704
4. Kelly J.R., and Denry I. Stabilized zirconia as a structural ceramic: an overview. Dent Mater 24 (2008) 289-298
5. Denry I., and Kelly J.R. State of the art of zirconia for dental applications. Dent Mater 24 (2008) 299-307
6. 3 composite as a function of isothermal holding time. Int J Refract Met Hard Mater 25 (2007) 374-379
7. Chevalier J. What future for zirconia as a biomaterial?. Biomaterials 27 (2006) 535-543
8. Correa de Sá e Benevides de Moraes M.C., Nelson E.C., Duailibi F.J., and Gulmaraes de Oliveira L. Mechanical properties of alumina-zirconia composites for ceramic abutments. Mater Res 7 (2004) 643-649
9. De Aza A.H., Chevalier J., and Fantozzi G. Crack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prostheses. Biomaterials 23 (2002) 937-945
10. 2 containing ceramics. In: Claussen N, Rulle M, Heuer A, editors. Advanced in ceramics. Science and technology II, Columbus: American Ceramic Society; 1984.
11. Gregori G., Burger W., and Sergo V. Piezo-spectroscopic analysis of the residual stress in zirconia-toughened alumina ceramics: the influence of the tetragonal-to-monoclinic transformation. Mater Sci Eng A 271 (1999) 401-406
12. Guazzato M., Albakry M., Ringer S., and Swain M.V. Fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics. Dent Mater 20 (2004) 441-448
13. Guazzato M., Albakry M., Ringer S., and Swain M.V. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 20 (2004) 449-456
14. Castrillón M., García C., and Paucar C. Evaluación de la Influencia del Tamaño de Partícula y el Tiempo de Tratamiento Térmico Sobre las Características Físico-Mecánicas de un Compuesto de Alúmina Sinterizada Infiltrada con Vidrio de Lantano. Dyna 74 (2007) 159-165
15. Gutknecht D., Chevalier J., Garnier V., and Fantozzi G. Key role of processing to avoid low temperature ageing in alumina zirconia composites for orthopedic application. J Eur Ceram Soc 27 (2007) 1547-1552
16. Yang B., Lange H.C., Sharnberg M., Wolfart S., and Ludwing K. Influence of saliva contamination on zirconia ceramic bonding. Dent Mater 24 (2008) 508-513
17. Evans A.G. Perspective on the development of high-toughness ceramics. J Am Ceram Soc 73 (1990) 187-206
18. Sjolin R., Sundh A., and Bergman M. The decim system for the production of dental restorations. Int J Comput Dent 2 (1999) 197-207
19. Christel P., Meunier A., Heller M., Torre J.P., and Peille C.N. Mechanical properties and short-term in-vivo evaluation of yttrium-oxide partially-stabilized zirconia. J Biomed Mater Res 23 (1989) 45-61
20. Hannink R.H., Kelly P.M., and Muddle B.C. Transformation toughening in zirconia-containing ceramics. J Am Ceram Soc 83 (2000) 461-487
21. Anusavice J. Clasificación de los materiales de reconstrucción dental Phillips. In: Science of Dent Materials 11° edición, Kennet Elsevier España,SA Génova,17-3° 28004 Madrid España; 2004.
22. Evans A.G., and Heuer A.H. Transformation toughening in ceramics: martensitic transformation in crack-tip stress fields. J Am Ceram Soc 63 (1980) 241-248
23. Meza J., and Chávez C. Estimación de la tenacidad a la fractura mediante el método de indentación. Dyna 139 (2003) 53-58
24. 2 systems by X-ray diffraction. J Am Ceram Soc 67 (1984) 183-184
25. Martin C.L., and Bouvard D. Isostatic compaction of bimodal powder mixtures and composites. Int J Mech Sci 46 (2004) 907-927
26. 3. J Am Ceram Soc 87 (2004) 717-719
27. Park W.Ch., Yoon D.Y., Blendell J.E., and Handwerker C.A. Singular grain boundaries in alumina and their roughening transition. J Am Ceram Soc 86 (2003) 603-611
28. Kim M.J., Cho Y.K., and Yoon D.Y. Facet-defacet transition of grain boundaries in alumina. J Am Ceram Soc 87 (2004) 455-459
29. Dillon S.J., and Harmer M.P. Multiple grain boundary transitions in ceramics: a case study of alumina. Acta Mater 55 (2007) 5247-5254
30. 3. J Am Ceram Soc 67 (1984) 292-301
31. Mendelson M.I. Average grain size in polycrystalline ceramics. J Am Ceram Soc 52 (1969) 443-446
32. 2 powder compacts on microstructural development. J Mater Sci 28 (1993) 342-348
33. Mazaheri M., Simchi A., and Golestani-Fard F. Densification and grain growth of nanocrystalline 3Y-TZP during two-step sintering. J Eur Ceram Soc (2008) 10.1016/j.jeurceramsoc. 2008.04.03
34. Scott H.G. Phase relationships in the zirconia-yttria system. J Mater Sci 10 (1975) 1527-1535
35. 3 composites produced by colloidal processing. J Alloys Compd 391 (2005) 217-224
36. 3 system. Mater Lett 60 (2006) 2302-2305
37. 3 nanocomposite ceramics. Ceram Int 34 (2008) 1797-1803
38. 2 nanocomposites. Ceram Int (2008) 10.1016/j.ceramint.2008.02.00
39. 2 composite and its correlation with electrical conductivity. Mater Res 2 (1999) 205-210
40. 3 system. J Mater Sci 17 (1982) 240-246
41. Matsui K., Horikoshi H., Ohmichi N., Ohgai M., Yoshida H., and Ikuhara Y. Cubic-formation and grain growth mechanisms in tetragonal zirconia polycrystal. J Am Ceram Soc 86 (2003) 1401-1408
42. 2 polycrystals (Y-TZP). In: Rhule M, Claussen N. Heuer AH editors. Advances in ceramics, science and technology of Zirconia II, vol. 12. Columbus, OH: American Ceramic Society; 1984. p. 352-70.
43. Ruiz L., and Readey M.J. Effect of heat treatment on grain size, phase assemblage, and mechanical properties of 3 mol% Y-TZP. J Am Ceram Soc 79 (1996) 2331-2340
44. Chevalier J., Deville S., Munch E., Jullian R., and Lair F. Critical effect of cubic phase on aging in 3 mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis. Biomaterials 25 (2004) 5539-5545
45. Roberts J.C., Powers J.M., and Craig R.G. Fracture toughness and critical strain energy release rate of dental amalgam. J Mater Sci 13 (1978) 965-971
46. Morena R., Lockwood P.E., and Fairhust C.W. Fracture toughness of commercial dental porcelains. Dent Mater 2 (1986) 58-62
47. Al-Shehri S. Relative fracture toughness and hardness of dental ceramics. Saudi Dent J 14 (2002) 67-72
48. Seghi R.R., Rosenstiel S.F., and Bauer P. Abrasion of human enamel by different dental ceramics in vitro. J Dent Res 70 (1991) 221-225
49. Echeberria J., Tarazona J., He J.Y., Butler T., and Castro F. Sinter-HIP of α-alumina powders with sub-micron grain sizes. J Eur Ceram Soc 22 (2002) 1801-1809
50. Suzuki H.Y., Shinosaki K., Kuroi H., and Tashima S. Sintered microstructure and mechanical properties of high purity alumina ceramics made by high-speed centrifugal compaction process. Key Eng Mater 159-160 (1999) 187-192
51. Chakravarty D., Bysakh S., Muraleedhran K., Narasigna Rao T., and Sundaresan R. Spark plasma sintering of magnesia-doped alumina with high hardness and fracture toughness. J Am Ceram Soc 91 (2008) 203-208
52. 4C). J Am Ceram Soc 85 (2002) 1291-1293
53. Lin J.D., and Duh J.G. Fracture toughness and hardness of ceria- and yttria-doped tetragonal zirconia. Mater Chem Phys 78 (2002) 253-261
54. Mccolom JJ. Ceramic hardness. New York: Plenum Press; 1990. p. 1.
55. Casellas D., Rafols I., Llanes L., and Anglada M. Fracture toughness of zirconia-alumina composites. Int J Refract Met Hard Mater 17 (1999) 11-20
56. Celli A., Tucci A., Esposito L., and Palmonari C. Fractal analysis in alumina-zirconia composites. J Eur Ceram Soc 23 (2003) 469-479
57. Huang X.W., Wang S.W., and Huang X.X. Microstructure and mechanical properties of ZTA fabricated by liquid phase sintering. Ceram Int 29 (2003) 765-769
58. Srdic V, Radonjic L. Processing of the alumina-zirconia composite and its mechanical properties, In: Uran P, Fernandez JF, editor. Third Euro-ceramics, vol. 3; 1993. p. 701-6.
59. Lee W., and Clegg W.J. The deflection of cracks at interfaces. Key Eng Mater 116-117 (1996) 193-208
60. Kwon NH, Kim GH, Song HS, Lee HL. Synthesis and properties of cubic zirconia-alumina composite by mechanical alloying. Mater Sci Eng 2001;A 299:185-94.