The Effect of Preparation Height and Luting Agent on the Resistance form of Cemented Cast Crowns Under Load Fatigue

Journal of Prosthetic Dentistry

Volumn 102, Issue 3, 2009, Pages 155-164

  Leong, Elvin W J ^a   Choon Tan, Keson Beng ^a   Nicholls, Jack Ivan ^b   Chua, Ee Kiam ^a   Wong, Keng Mun ^a   Neo, Jennifer Chiew Lian ^a  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

^b UNIVERSITY OF WASHINGTON   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

TOOTH CEMENT;

ARTICLE; CHEMISTRY; COMPARATIVE STUDY; DENTAL BONDING; DENTAL CARE; DENTAL DEBONDING; DENTAL SURGERY; HISTOLOGY; HUMAN; METHODOLOGY; NONPARAMETRIC TEST; PREMOLAR TOOTH; TOOTH CROWN; TOOTH PROSTHESIS; WEIGHT BEARING;

BICUSPID; CROWNS; DENTAL BONDING; DENTAL CEMENTS; DENTAL DEBONDING; DENTAL PROSTHESIS RETENTION; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; HUMANS; STATISTICS, NONPARAMETRIC; TOOTH CROWN; TOOTH PREPARATION, PROSTHODONTIC; WEIGHT-BEARING;

EID: 69049091195     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(09)60137-2     Document Type: Article

References (58)

1. rd ed (1997), Quintessence, Chicago 139-142 120, 151-2.
2. Potts R.G., Shillingburg Jr. H.T., and Duncanson Jr. M.G. Retention and resistance of preparations for cast restorations. J Prosthet Dent 43 (1980) 303-308
3. Gilboe D.B., and Teteruck W.R. Fundamentals of extracoronal tooth preparation. Part I. Retention and resistance form. J Prosthet Dent 32 (1974) 651-656
4. Glossary of prosthodontic terms. J Prosthet Dent 94 (2005) 38 50,69.
5. Wiskott H.W., Nicholls J.I., and Belser U.C. The relationship between abutment taper and resistance of cemented crowns to dynamic loading. Int J Prosthodont 9 (1996) 117-139
6. Woolsey G.D., and Matich J.A. The effect of axial grooves on the resistance form of cast restorations. J Am Dent Assoc 97 (1978) 978-980
7. th ed (2006), Elsevier, St. Louis 209-258
8. Noonan Jr. J.E., and Goldfogel M.H. Convergence of the axial walls of full veneer crown preparations in a dental school environment. J Prosthet Dent 66 (1991) 706-708
9. Jørgensen K.D. The relationship between retention and convergence angle in cemented veneer crowns. Acta Odontol Scand 13 (1955) 35-40
10. Kaufman E.G., Coelho D.H., and Colin L. Factors influencing the retention of cemented gold castings. J Prosthet Dent 11 (1961) 487-502
11. Wilson Jr. A.H., and Chan D.C. The relationship between preparation convergence and retention of extracoronal retainers. J Prosthodont 3 (1994) 74-78
12. Ohm E., and Silness J. The convergence angle in prepared teeth for artificial crowns. J Oral Rehabil 5 (1978) 371-375
13. Annerstedt A., Engström U., Hansson A., Jansson T., Karlsson S., Liljihagen H., et al. Axial wall convergence of full veneer crown preparations. Documented for dental students and general practitioners. Acta Odontol Scand 54 (1996) 109-112
14. Smith C.T., Gary J.J., Conkin J.E., and Franks H.L. Effective taper criterion for the full veneer crown preparation in preclinical prosthodontics. J Prosthodont 8 (1999) 196-200
15. Nordlander J., Weir D., Stoffer W., and Ochi S. The taper of clinical preparations for fixed prosthodontics. J Prosthet Dent 60 (1988) 148-151
16. Leempoel P.J., Lemmens P.L., Snoek P.A., and van't Hof M.A. The convergence angle of tooth preparations for complete crowns. J Prosthet Dent 58 (1987) 414-416
17. Mack P.J. A theoretical and clinical investigation into the taper achieved on crown and inlay preparations. J Oral Rehabil 7 (1980) 255-265
18. Eames W.B., O'Neal S.J., Monteiro J., Miller C., Roan Jr. J.D., and Cohen K.S. Techniques to improve the seating of castings. J Am Dent Assoc 96 (1978) 432-437
19. Kent W.A., Shillingburg Jr. H.T., and Duncanson Jr. M.G. Taper of clinical preparations for cast restorations. Quintessence Int 19 (1988) 339-345
20. Dodge W.W., Weed R.M., Baez R.J., and Buchanan R.N. The effect of convergence angle on retention and resistance form. Quintessence Int 16 (1985) 191-194
21. Wiskott H.W., Nicholls J.I., and Belser U.C. The effect of tooth preparation height and diameter on the resistance of complete crowns to fatigue loading. Int J Prosthodont 10 (1997) 207-215
22. Lewis R.M., and Owen M.M. A mathematical solution of a problem in full crown construction. J Am Dent Assoc 59 (1959) 943-947
23. Weed R.M., and Baez R.J. A method for determining adequate resistance form of complete cast crown preparations. J Prosthet Dent 52 (1984) 330-334
24. Zuckerman G.R. Resistance form for the complete veneer crown: principles of design and analysis. Int J Prosthodont 1 (1988) 302-307
25. Parker M.H., Gunderson R.B., Gardner F.M., and Calverley M.J. Quantitative determination of taper adequate to provide resistance form: concept of limiting taper. J Prosthet Dent 59 (1988) 281-288
26. Trier A.C., Parker M.H., Cameron S.M., and Brousseau J.S. Evaluation of resistance form of dislodged crowns and retainers. J Prosthet Dent 80 (1998) 405-409
27. Maxwell A.W., Blank L.W., and Peulleu Jr. G.B. Effect of crown preparation height on the retention and resistance of gold castings. Gen Dent 38 (1990) 200-202
28. Rosenstiel S.F., Land M.F., and Crispin B.J. Dental luting agents: a review of the current literature. J Prosthet Dent 80 (1998) 280-301
29. Donovan T.E., and Cho G.C. Contemporary evaluation of dental cements. Compend Contin Educ Dent 20 (1999) 197-199 208-8.
30. Osborne J.W., Swartz M.L., Goodacre C.J., Phillips R.W., and Gale E.N. A method for assessing the clinical solubility and disintegration of luting cements. J Prosthet Dent 40 (1978) 413-417
31. Mitchem J.C., and Gronas D.G. Continued evaluation of the clinical solubility of luting cements. J Prosthet Dent 45 (1981) 289-291
32. Wiskott H.W., Nicholls J.I., and Belser U.C. Stress fatigue: basic principles and prosthodontic implications. Int J Prosthodont 8 (1995) 105-116
33. Fissore B., Nicholls J.I., and Yuodelis R.A. Load fatigue of teeth restored by a dentin bonding agent and a posterior composite resin. J Prosthet Dent 65 (1991) 80-85
34. Fan P., Nicholls J.I., and Kois J.C. Load fatigue of five restoration modalities in structurally compromised premolars. Int J Prosthodont 8 (1995) 213-220
35. Junge T., Nicholls J.I., Phillips K.M., and Libman W.J. Load fatigue of compromised teeth: a comparison of 3 luting cements. Int J Prosthodont 11 (1998) 558-564
36. Hsu Y.B., Nicholls J.I., Phillips K.M., and Libman W.J. Effect of core bonding on fatigue failure of compromised teeth. Int J Prosthodont 15 (2002) 175-178
37. Uy J.N., Lian J.N., Nicholls J.I., and Tan K.B. Load-fatigue performance of gold crowns luted with resin cements. J Prosthet Dent 95 (2006) 315-322
38. Shor A., Nicholls J.I., Phillips K.M., and Libman W.J. Fatigue load of teeth restored with bonded direct composite and indirect ceramic inlays in MOD class II cavity preparations. Int J Prosthodont 16 (2003) 64-69
39. Graf H. Bruxism. Dent Clin North Am 13 (1969) 659-665
40. Wiskott H.W., Nicholls J.I., and Taggart R. Fatigue strength of a Au-Pd alloy/585 solder combination. J Dent Res 70 (1991) 140-145
41. Butson T.J., Nicholls J.I., Ma T., and Harper R.J. Fatigue life of preceramic soldered and postceramic soldered joints. Int J Prosthodont 6 (1993) 468-474
42. Wiskott H.W., Nicholls J.I., and Belser U.C. Fatigue resistance of soldered joints: a methodological study. Dent Mater 10 (1994) 215-220
43. Llobell A., Nicholls J.I., Kois J.C., and Daly C.H. Fatigue life of porcelain repair systems. Int J Prosthodont 5 (1992) 205-213
44. Basten C.H., Nicholls J.I., Daly C.H., and Taggart R. Load fatigue performance of two implant-abutment combinations. Int J Oral Maxillofac Implants 11 (1996) 522-528
45. Khraisat A., Stegaroiu R., Nomura S., and Miyakawa O. Fatigue resistance of two implant/abutment joint designs. J Prosthet Dent 88 (2002) 604-610
46. Perriard J., Wiskott W.A., Mellal A., Scherrer S.S., Botsis J., and Belser U.C. Fatigue resistance of ITI implant-abutment connectors - a comparison of the standard cone with a novel internally keyed design. Clin Oral Implants Res 13 (2002) 542-549
47. Yamashita J., Takakuda K., Shiozawa I., Nagasawa M., and Miyairi H. Fatigue behavior of the zinc phosphate cement layer. Int J Prosthodont 13 (2000) 321-326
48. Cameron S.M., Morris J.W., Keesee S.M., Barsky T.B., and Parker M.H. The effect of preparation taper on the retention of cemented cast crowns under lateral fatigue loading. J Prosthet Dent 95 (2006) 456-461
49. Zidan O., and Ferguson G.C. The retention of complete crowns prepared with three different tapers and luted with four different cements. J Prosthet Dent 89 (2003) 565-571
50. Proussaefs P. Crowns cemented on crown preparations lacking geometric resistance form. Part II: effect of cement. J Prosthodont 13 (2004) 36-41
51. De Boever J.A., McCall Jr. W.D., Holden S., and Ash Jr. M.M. Functional occlusal forces: an investigation by telemetry. J Prosthet Dent 40 (1978) 326-333
52. Anderson D.J. Measurement of stress in mastication. I. J Dent Res 35 (1956) 664-670
53. Anderson D.J. Measurement of stress in mastication. II. J Dent Res 35 (1956) 671-673
54. Gibbs C.H., Mahan P.E., Lundeen H.C., Brehnan K., Walsh E.K., and Holbrook W.B. Occlusal forces during chewing and swallowing as measured by sound transmission. J Prosthet Dent 46 (1981) 443-449
55. th ed (2009), Elsevier, St. Louis 140-175
56. Nakajima M., Sano H., Burrow M.F., Tagami J., Yoshiyama M., Ebisu S., et al. Tensile bond strength and SEM evaluation of caries-affected dentin using dentin adhesives. J Dent Res 74 (1995) 1679-1688
57. el-Mowafy O.M., Fenton A.H., Forrester N., and Milenkovic M. Retention of metal ceramic crowns cemented with resin cements: effects of preparation taper and height. J Prosthet Dent 76 (1996) 524-529
58. Van Meerbeek B., Peumans M., Verschueren M., Gladys S., Braem M., Lambrechts P., et al. Clinical status of ten dentin adhesive systems. J Dent Res 73 (1994) 1690-1702