Influence of frequency and exposure to a saline solution on the corrosion fatigue crack growth behavior of the aluminum alloy 2024

International Journal of Fatigue

Volumn 31, Issue 11-12, 2009, Pages 1684-1695

  Menan, Frederic ^a   Henaff, Gilbert ^a  

^a ENSMA   (France)

Author keywords

Alternate immersion; Aluminum alloys; Frequency; Intergranular rupture; Loading waveform

Indexed keywords

2024 ALLOY; 3.5%NACL; ALLOY 2024; ALTERNATE IMMERSION; ANODIC DISSOLUTION; CRACK ADVANCE; DIFFERENT FREQUENCY; DISTILLED WATER; FATIGUE CRACK GROWTH; FILM RUPTURE; FREQUENCY; GRAIN ORIENTATION; INTERGRANULAR RUPTURE; K-VALUES; LOAD RATIO; LOADING WAVEFORM; MICROSTRUCTURAL PARAMETERS; ORDER OF MAGNITUDE; PROCESS ZONE; SALINE SOLUTIONS; SAW-TOOTH; STRESS CORROSION; WAVE FORMS;

ALUMINA; ALUMINUM; ALUMINUM ALLOYS; ALUMINUM METALLURGY; CRACK DETECTION; CRACKING (CHEMICAL); DISSOLUTION; FATIGUE CRACK PROPAGATION; FATIGUE DAMAGE; HYDROGEN; HYDROGEN EMBRITTLEMENT; INTERNATIONAL TRADE; MECHANISMS; PASSIVATION; PRECIPITATION (CHEMICAL); RESIDUAL STRESSES; SODIUM CHLORIDE; STRESS CORROSION CRACKING; TEXTURES;

CORROSION FATIGUE;

EID: 68949175004     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2009.02.033     Document Type: Article

References (47)

1. Ford F.P. corrosion fatigue crack propagation in aluminum-7% magnesium alloy. Corrosion 35 7 (1979)
2. Trockels I, Gysler A, Lütjering G. Influence of frequency on fatigue crack propagation behavior of aluminum alloys in aggressive environment. In: Fatigue'96; 1996.
3. Schmidt H.-J., and Brandecker B. Corrosion fatigue data and design from an aircraft manufacturer's point of view. Fatigue'96 (1996), Elsevier Science, Oxford (UK) 643
4. Atkinson J.D., and Lindley T.C. The effect of frequency and temperature on environmentally assisted fatigue crack growth below KISCC in steels. Int Mech E Conf Publ 4 (1977) 65-74
5. Dawson D.B., and Pelloux R.M. Corrosion fatigue crack growth of titanium alloys in aqueous environments. Metall Trans (1974) 5
6. Piascik R.S., and Gangloff R.P.. Aqueous environment effects on intrinsic corrosion fatigue crack propagation in an Al-Li-Cu alloy. In: Ives M.B. (Ed). 1st International conference on environment induced cracking of metals, Kohler, Wisconsin, USA (1988), NACE 233
7. Gangloff RP. Fatigue crack propagation in aerospace aluminum alloys. In: Blom AF, Bloms AF, editors. Fatigue'02, 8th international fatigue congress. Engineering materials advisory services. West Midlands (UK); 2002. p. 720-9.
8. Simpson C.H., Ray C.J., and Skerry B.S. Accelerated corrosion testing of industrial maintenance paints using a cyclic corrosion weathering method. J. Protect Coat Linings 8 5 (1991) 28-36
9. ASTM, G44-99. Exposure of metals and alloys by alternate immersion in neutral 3.5% sodium chloride solution; 1999.
10. ASTM, G47-98. Standard test method for determining susceptibility to SCC of 2XXX and 7XXX aluminium alloy products; 1998.
11. ASTM, G139-05. Standard test method for determining stress corrosion cracking resistance of heat-treatable aluminum alloy products using breaking load method; 2005.
12. Du M.L., Chiang F.P., Kagwade S.V., and Clayton C.R. Synergism between corrosion and fatigue of Al2024-T3 alloy (1995), American Society of Mechanical Engineers, Aerospace Division (Publication) AD
13. Du M.L., Chiang F.P., Kagwade S.V., and Clayton C.R. Damage of Al 2024 alloy due to sequential exposure to fatigue, corrosion and fatigue. Int J Fatigue 20 10 (1998) 743-748
14. Yao W.X. A cumulative fatigue damage rule under the alternative of corrosion or cyclic loading. Acta Metall Sin 20 1 (2007) 65-71
15. Sprowls DO, Brown RH. Stress corrosion mechanism for aluminum alloys. In: International corrosion conference series NACE, vol. 1; 1969.
16. Gourcuff F., Renon C., and Martinod H. Study of the process of stress corrosion cracking in an aluminum alloy. Mem Sci Rev Metal 69 12 (1972) 889-902
17. Speidel M.O. Stress corrosion cracking of aluminium alloys. Metall Trans 6A (1975) 631
18. ASTM. E647-00. Annual book of ASTM standards; 1998.
19. ASTM. G1-03. Standard practice for preparing, cleaning, and evaluating corrosion test specimens. Annual book of ASTM standards, vol. 03.02; 2005.
20. Pelloux R.M.N. Mechanisms of formation of ductile fatigue striations. Trans ASM 62 1 (1969) 281-285
21. Hyatt M.V. Use of precracked specimens in stress corrosion testing of high strength aluminum alloys. Corrosion 26 11 (1970) 487-503
22. Braun R. Investigation of the SCC behaviour of alloy 2024 using the slow strain rate technique. Werkstoffe Korros 44 3 (1993) 73-82
23. Rhodes D., Musuva J.K., and Radon J.C. The significance of stress corrosion cracking in corrosion fatigue crack growth studies. Eng Fract Mech 15 3-4 (1981) 407-419
24. Braun R. Anion effects on the stress corrosion cracking behaviour of aluminium alloys. Mater Corros 54 3 (2003) 157-162
25. Dietzel W., Schwalbe K.-H., and Wu D. Application of fracture mechanics techniques to the environmentally assisted cracking of aluminium 2024. Fatigue Fract Eng Mater Struct 12 6 (1989) 495-510
26. Little D.A., Connolly B.J., and Scully J.R. An electrochemical framework to explain the intergranular stress corrosion behavior in two Al-Cu-Mg-Ag alloys as a function of aging. Corros Sci 49 2 (2007) 347-372
27. Menan F. Influence de la Corrosion Saline sur la Tolérance aux Dommages d'un Alliage d'Aluminium Aéronautique 2XXX. PhD University of Poitiers, France. Futuroscope Chasseneuil; 2008.
28. Petit J, Hénaff G, Sarrazin Baudoux C. Environmentally assisted fatigue in the gaseous atmosphere. In: Karihaloos B, editor. Comprehensive structural integrity. Environmentally assisted fracture, vol. 6; 2003. p. 211-80.
29. Trockels I., Lütjering G., and Gysler A. Effect of frequency on fatigue crack propagation behavior of the aluminum alloy 6013 in corrosive environment. Mater Sci Forum 217-222 (1996) 1599-1604
30. Nocke K., Bergner F., Bersch H., Haase I., Worch H., Tempus G., et al. Environment-sensitive fracture of aluminium alloy 6013. Mater Corros - Werkstoffe Korros 51 9 (2000) 628-634
31. Piascik R.S., and Gangloff R.P. Environmental fatigue of an Al-Li-Cu Alloy: part I. Intrinsic crack propagation kinetics in hydrogenous environments. Metall Trans 22A October (1991) 2415-2428
32. Chun Y.G., Pyun S.I., and Lee S.M. The influence of loading frequency on the fatigue crack propagation behaviour of Al-Zn-Mg alloy at low cyclic stress intensity level in 3.5 wt% NaCl solution. J Mater Sci Lett 10 24 (1991) 1439-1442
33. Sivaprasad S., Tarafder S., Ranganath V.R., Tarafder M., and Ray K.K. Corrosion fatigue crack growth behaviour of naval steels. Corros Sci 48 8 (2006) 1996-2013
34. Ambrose JR. PhD Thesis, PhD University of Maryland; 1972.
35. Kim J.D., and Pyun S.I. Effects of electrolyte-composition and applied potential on the repassivation kinetics of pure aluminum. Electrochim Acta 40 12 (1995) 1863-1869
36. Haase I., Nocke K., Ruhnow M., and Worch H. Behavior of coarse precipitates in the aluminum alloy AA 6013 T6 when under a cyclic load in a corrosive medium. Prakt Metallogr - Pract Metall 38 11 (2001) 647-660
37. Haase I., Nocke K., Worch H., Zouhar G., and Tempus G. An Investigation of the fatigue behaviour of the aluminium alloy AA 6013 T6 in a corrosive medium. Prakt Metallogr 38 3 (2001)
38. Vogt H., and Speidel M.O. Stress corrosion cracking of two aluminium alloys: a comparison between experimental observations and data based on modelling. Corros Sci 40 2-3 (1998) 251-270
39. Wei R.P., and Landes J.D. Mater Res Stand 9 7 (1969) 25
40. Ford F.P. Quantitative prediction of environmentally assisted cracking. Corrosion 52 5 (1996) 375-395
41. Ford F.P., and Hoar T.P. Electrode reaction rates on straining aluminum-magnesium wires in chloride and sulfate solutions. J Electrochem Soc 120 8 (1973) 1013-1019
42. Cheng Y.L., Zhang Z., Cao F.H., Li J.F., Zhang J.Q., Wang J.M., et al. A Study of the corrosion of aluminium alloy 2024-T3 under thin electrolyte layers. Corros Sci 46 7 (2004) 1649-1667
43. Guillaumin V., and Mankowski G. Localized corrosion of 2024 T351 aluminium alloy in chloride media. Corros Sci 41 3 (1999) 421-438
44. Blanc C., Lavelle B., and Mankowski G. The role of precipitates enriched with copper on the susceptibility to pitting corrosion of the 2024 aluminium alloy. Corros Sci 39 3 (1997) 495-510
45. 4 at 97 °C. Corrosion 36 10 (1980) 558-565
46. Tien J.K., Thompson A.W., Bernstein I.M., and Richards R.J. Hydrogen transport by dislocations. Metall Trans 7A July (1976) 821-829
47. Shafiq B., and Agarwala V.S. Corrosion fatigue in 7075-T6 aluminum: life prediction issues for carrier-based operations. J Aircraft 41 2 (2004) 393-398