메뉴 건너뛰기




Volumn 223, Issue 8, 2009, Pages 969-979

Parametrical optimization of laser surface alloyed NiTi shape memory alloy with Co and Nb by the Taguchi method

Author keywords

Laser surface alloying; NiTi; Taguchi method

Indexed keywords

ALLOYED LAYERS; COMPOSITION PROFILE; CONTROL FACTORS; DILUTION RATIO; ENERGY DISPERSIVE SPECTROMETRY; HIGH-PURITY; LASER POWER; LASER PROCESS; LASER PROCESSING PARAMETERS; LASER SURFACE; LASER SURFACE ALLOYING; LASER SURFACE ALLOYING TECHNIQUE; LASER SYSTEMS; METAL POWDER; NICKEL TITANIUM; NITI; NITI SHAPE MEMORY ALLOYS; NITI SMA; PROCESS EFFECTS; PROCESS VARIABLES; PROCESSING PARAMETERS; SCANNING VELOCITY; SHAPE MEMORY ALLOY; STATISTICAL ACCURACY; STATISTICAL TECHNIQUES; SYSTEMATIC STUDY; TAGUCHI; TAGUCHI APPROACH;

EID: 68849111531     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544054JEM1291     Document Type: Article
Times cited : (7)

References (31)
  • 2
    • 33644695491 scopus 로고    scopus 로고
    • Laser surface alloying of NiTi shape memory alloy with Mo for hardness improvement and reduction of Ni2+ ion release
    • Man, H. C., Ho, K. L., and Cui, Z. D. Laser surface alloying of NiTi shape memory alloy with Mo for hardness improvement and reduction of Ni2+ ion release. Surface Coatings Technol., 2006, 200(14-15), 4612-4618.
    • (2006) Surface Coatings Technol , vol.200 , Issue.14-15 , pp. 4612-4618
    • Man, H.C.1    Ho, K.L.2    Cui, Z.D.3
  • 3
    • 34247160848 scopus 로고    scopus 로고
    • Laser cladding of copper with molybdenum for wear resistance enhancement in electrical contacts
    • Ng, K. W., Man, H. C., Cheng, F. T., and Yue, T. M. Laser cladding of copper with molybdenum for wear resistance enhancement in electrical contacts. Appl. Surface Sci., 2007, 253(14), 6236-6241.
    • (2007) Appl. Surface Sci , vol.253 , Issue.14 , pp. 6236-6241
    • Ng, K.W.1    Man, H.C.2    Cheng, F.T.3    Yue, T.M.4
  • 4
    • 11844261435 scopus 로고    scopus 로고
    • Research progress on laser surface modification of titanium alloys
    • Tian, Y. S., Chen, C. Z., Li, S. T., and Huo, Q. H. Research progress on laser surface modification of titanium alloys. Appl. Surface Sci., 2005, 242(1-2), 177-184.
    • (2005) Appl. Surface Sci , vol.242 , Issue.1-2 , pp. 177-184
    • Tian, Y.S.1    Chen, C.Z.2    Li, S.T.3    Huo, Q.H.4
  • 5
    • 0033930431 scopus 로고    scopus 로고
    • Wear resistance of a laser surface alloyed Ti-6Al-4V alloy
    • Jiang, P., He, X. L., Li, X. X., Yu, L. G., and Wang, H. M. Wear resistance of a laser surface alloyed Ti-6Al-4V alloy. Surface Coatings Technol., 2000, 130(1), 24-28.
    • (2000) Surface Coatings Technol , vol.130 , Issue.1 , pp. 24-28
    • Jiang, P.1    He, X.L.2    Li, X.X.3    Yu, L.G.4    Wang, H.M.5
  • 6
    • 0032144923 scopus 로고    scopus 로고
    • Corrosion properties of tin prepared by laser gas alloying of Ti and Ti6Al4V
    • García, I. and Damborenea, J. J. D. Corrosion properties of tin prepared by laser gas alloying of Ti and Ti6Al4V. Corrosion Sci., 1998, 40(8), 1411-1419.
    • (1998) Corrosion Sci , vol.40 , Issue.8 , pp. 1411-1419
    • García, I.1    Damborenea, J.J.D.2
  • 7
    • 0031145152 scopus 로고    scopus 로고
    • Laser alloying of zinc with aluminum: Solidification structures
    • Carvalho, P. A. and Vilar, R. Laser alloying of zinc with aluminum: solidification structures. Surface Coatings Technol., 1997, 91(3), 158-166.
    • (1997) Surface Coatings Technol , vol.91 , Issue.3 , pp. 158-166
    • Carvalho, P.A.1    Vilar, R.2
  • 8
    • 0542437785 scopus 로고
    • Laser surface melting of cast irons and alloy cast irons
    • Eds W. M. Steen, Z. D. Chen, and D. R. F. West, Laser Institute of American
    • Belforte, D. and Levitt, M. Laser surface melting of cast irons and alloy cast irons. In Industrial laser annual handbook (Eds W. M. Steen, Z. D. Chen, and D. R. F. West), 1987, pp. 80-96 (Laser Institute of American).
    • (1987) Industrial laser annual handbook , pp. 80-96
    • Belforte, D.1    Levitt, M.2
  • 9
    • 0022945032 scopus 로고    scopus 로고
    • Marsden, C., West, D. R. F., and Steen, W. M. Laser surface alloying of stainless steel with carbon. Proceedings of NATO Advanced Study Institute on Laser surface treatment of metals. Eds C. W. Draper and P. Mazzoldi, 1986, pp. 461-474 (Martinus Nijhoff, Dordrecht, Netherlands).
    • Marsden, C., West, D. R. F., and Steen, W. M. Laser surface alloying of stainless steel with carbon. Proceedings of NATO Advanced Study Institute on Laser surface treatment of metals. Eds C. W. Draper and P. Mazzoldi), 1986, pp. 461-474 (Martinus Nijhoff, Dordrecht, Netherlands).
  • 11
    • 0039129422 scopus 로고    scopus 로고
    • An analysis of broken-layer characteristics in laser alloying for coinage applications
    • Liu, Z., Watkins, K. G., and Steen, W. M. An analysis of broken-layer characteristics in laser alloying for coinage applications. J. Laser Applic., 1999, 11(3), 136-142.
    • (1999) J. Laser Applic , vol.11 , Issue.3 , pp. 136-142
    • Liu, Z.1    Watkins, K.G.2    Steen, W.M.3
  • 12
    • 0035686514 scopus 로고    scopus 로고
    • Effect of beam width on melt characteristics in large area surface alloying
    • Liu, Z., Pirch, N., Gasser, A., Watkins, K. G., and Hatherley, P. G. Effect of beam width on melt characteristics in large area surface alloying. J. Laser Applic., 2001, 13(6), 231-238.
    • (2001) J. Laser Applic , vol.13 , Issue.6 , pp. 231-238
    • Liu, Z.1    Pirch, N.2    Gasser, A.3    Watkins, K.G.4    Hatherley, P.G.5
  • 13
    • 33750978416 scopus 로고    scopus 로고
    • Process parameters influencing melt profile and hardness of pulsed laser treated Ti-6Al-4V
    • Kumar, V. C. Process parameters influencing melt profile and hardness of pulsed laser treated Ti-6Al-4V. Surface and Coatings Technol., 2006, 201(6), 3174-3180.
    • (2006) Surface and Coatings Technol , vol.201 , Issue.6 , pp. 3174-3180
    • Kumar, V.C.1
  • 14
    • 19244369786 scopus 로고    scopus 로고
    • Influence of laser parameters on the formation of ablative plasma fluxes and the properties of deposited thin films
    • Ozegowski, M., Metev, S., and Sepold, G. Influence of laser parameters on the formation of ablative plasma fluxes and the properties of deposited thin films. Appl. Surface Sci., 1998, 127-129, 614-619.
    • (1998) Appl. Surface Sci , vol.127-129 , pp. 614-619
    • Ozegowski, M.1    Metev, S.2    Sepold, G.3
  • 15
    • 0033626909 scopus 로고    scopus 로고
    • The optimisation of processing parameters and characterisation of microstructure of direct laser fabricated TiAl alloy components
    • Srivastava, D., Chang, I. T. H., and Loretto, M. H. The optimisation of processing parameters and characterisation of microstructure of direct laser fabricated TiAl alloy components. Mater. Des., 2000, 21(4), 425-433.
    • (2000) Mater. Des , vol.21 , Issue.4 , pp. 425-433
    • Srivastava, D.1    Chang, I.T.H.2    Loretto, M.H.3
  • 16
    • 33748296408 scopus 로고    scopus 로고
    • xperimental studies on the microstructure and hardness of laser-treated steel specimens
    • Rana, J., Goswami, G. L., and Jha, S. K. et al.. xperimental studies on the microstructure and hardness of laser-treated steel specimens. Optics Laser Technol., 2007, 39(2), 385-393.
    • (2007) Optics Laser Technol , vol.39 , Issue.2 , pp. 385-393
    • Rana, J.1    Goswami, G.L.2    Jha, S.K.3
  • 17
    • 36049007460 scopus 로고    scopus 로고
    • Multi-objective optimization of Nd:YAG laser cutting of nickel-based superalloy sheet using orthogonal array with principal component analysis
    • Dubey, A. K. and Yadava, V. Multi-objective optimization of Nd:YAG laser cutting of nickel-based superalloy sheet using orthogonal array with principal component analysis. Optics Lasers Engng. 2008, 46(2), 124-132.
    • (2008) Optics Lasers Engng , vol.46 , Issue.2 , pp. 124-132
    • Dubey, A.K.1    Yadava, V.2
  • 18
    • 34848889246 scopus 로고    scopus 로고
    • Using Taguchi method to optimize welding pool of dissimilar laser-welded components
    • Anawa, E. M. and Olabi, A. G. Using Taguchi method to optimize welding pool of dissimilar laser-welded components. Optics Laser Technol., 2008, 40(2), 379-388.
    • (2008) Optics Laser Technol , vol.40 , Issue.2 , pp. 379-388
    • Anawa, E.M.1    Olabi, A.G.2
  • 19
    • 33846804074 scopus 로고    scopus 로고
    • Improving accuracy through shrinkage modelling by using Taguchi method in selective laser sintering
    • Raghunath, N. and Pandey, P. M. Improving accuracy through shrinkage modelling by using Taguchi method in selective laser sintering. Int. J. Machine Tools Mf., 2007, 47(6), 985-995.
    • (2007) Int. J. Machine Tools Mf , vol.47 , Issue.6 , pp. 985-995
    • Raghunath, N.1    Pandey, P.M.2
  • 20
    • 8344257294 scopus 로고    scopus 로고
    • A statistical approach to determine process parameter impact in Nd:YAG laser drilling of IN718 and Ti-6Al-4V sheets
    • Bandyopadhyay, S., Gokhale, H., Sarin Sundar, J. K., Sundararajan, G., and Joshi, S. V. A statistical approach to determine process parameter impact in Nd:YAG laser drilling of IN718 and Ti-6Al-4V sheets. Optics and Lasers Engng. 2005, 43(2), 163-182.
    • (2005) Optics and Lasers Engng , vol.43 , Issue.2 , pp. 163-182
    • Bandyopadhyay, S.1    Gokhale, H.2    Sarin Sundar, J.K.3    Sundararajan, G.4    Joshi, S.V.5
  • 21
    • 6344231759 scopus 로고    scopus 로고
    • Ti6A14V laser alloying process control by using a self-organizing fuzzy controller
    • Chen, H.-Y. and Huang, S.-J. Ti6A14V laser alloying process control by using a self-organizing fuzzy controller. Int. J. Machine Tools Mf., 2004, 44(15), 1653-1665.
    • (2004) Int. J. Machine Tools Mf , vol.44 , Issue.15 , pp. 1653-1665
    • Chen, H.-Y.1    Huang, S.-J.2
  • 24
    • 0030899466 scopus 로고    scopus 로고
    • Utilization of nickeltitanium shape memory alloy for stapes prosthesis
    • Kasano, F. and Morimitsu, T. Utilization of nickeltitanium shape memory alloy for stapes prosthesis. Auris Nasus Larynx. 1997, 24(2), 137-142.
    • (1997) Auris Nasus Larynx , vol.24 , Issue.2 , pp. 137-142
    • Kasano, F.1    Morimitsu, T.2
  • 25
    • 0344631774 scopus 로고    scopus 로고
    • Bone healing and mineralization, implant corrosion, and trace metals after nickel-titanium shape memory metal intramedullary fixation
    • Ryhänen, J., Kallioinen, M., Serlo, W., Perämäki, P., Junila, J., Sandvik, P., Niemelä, E., and Tuukkanen, J. Bone healing and mineralization, implant corrosion, and trace metals after nickel-titanium shape memory metal intramedullary fixation. J. Biomedical Mater. Res., 1999, 47, 472-480.
    • (1999) J. Biomedical Mater. Res , vol.47 , pp. 472-480
    • Ryhänen, J.1    Kallioinen, M.2    Serlo, W.3    Perämäki, P.4    Junila, J.5    Sandvik, P.6    Niemelä, E.7    Tuukkanen, J.8
  • 26
    • 0032238893 scopus 로고    scopus 로고
    • Gil, F. J. and Planell, J. A. Shape memory alloys for medical applications. Proc. IMech, Part H: J. Engineering Medicine. 1998, 212(H6), 473-488. DOI: 10.1243/0954411 981534231.
    • Gil, F. J. and Planell, J. A. Shape memory alloys for medical applications. Proc. IMech, Part H: J. Engineering Medicine. 1998, 212(H6), 473-488. DOI: 10.1243/0954411 981534231.
  • 27
    • 0030340747 scopus 로고    scopus 로고
    • On the nature of the biocompatibility and on medical applications of NiTi shape memory and superelastic alloys
    • Shabalovskaya, S. A. On the nature of the biocompatibility and on medical applications of NiTi shape memory and superelastic alloys. Biomedical Mater. Engng. 1996, 6, 267-289.
    • (1996) Biomedical Mater. Engng , vol.6 , pp. 267-289
    • Shabalovskaya, S.A.1
  • 29
    • 33751416859 scopus 로고    scopus 로고
    • Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning
    • Nalbant, M., Gokkaya, H., and Sur, G. Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning. Mater. Des., 2007, 28(4), 1379-1385.
    • (2007) Mater. Des , vol.28 , Issue.4 , pp. 1379-1385
    • Nalbant, M.1    Gokkaya, H.2    Sur, G.3


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.