Adding carbon nanotubes and integrating with AA5052 aluminium alloy core to simultaneously enhance stiffness, strength and failure strain of AZ31 magnesium alloy

Composites Part A: Applied Science and Manufacturing

Volumn 40, Issue 9, 2009, Pages 1490-1500

  Paramsothy, M ^a   Hassan, S F ^b   Srikanth, N ^a   Gupta, M ^a  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

^b KING FAHD UNIVERSITY OF PETROLEUM AND MINERALS   (Saudi Arabia)

Author keywords

AZ31 CNT nanocomposite; B. Fiber matrix bond; B. Mechanical Properties; B. Microstructures

Indexed keywords

ALUMINIUM ALLOYS; AZ31 MAGNESIUM ALLOY; AZ31-CNT NANOCOMPOSITE; B. FIBER/MATRIX BOND; B. MECHANICAL PROPERTIES; B. MICROSTRUCTURES; COMPRESSIVE PROPERTIES; CORE-SHELL; FAILURE STRAIN; INTER-DIFFUSION; INTER-METALLIC PARTICLE; MACROCOMPOSITE; MAGNESIUM ALLOY AZ31; MICROSTRUCTURAL CHARACTERISATION; SOLIDIFICATION PROCESSING; TRANSVERSE DIRECTIONS; ULTIMATE STRENGTH; WORK OF FRACTURE; YIELD STRENGTH;

ALUMINUM; ALUMINUM ALLOYS; CARBON NANOTUBES; CERIUM ALLOYS; COEXTRUSION; MAGNESIUM; MAGNESIUM ALLOYS; MECHANICAL PROPERTIES; MICROSTRUCTURE; NANOCOMPOSITES; REINFORCEMENT; SHELLS (STRUCTURES); STIFFNESS; YIELD STRESS;

FRACTURE;

EID: 68349155794     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2009.06.007     Document Type: Article

References (72)

1. Clyne T.W., and Withers P.J. An introduction to metal matrix composites (1993), Cambridge University Press, Cambridge p. 454-8
2. In: Brandes E.A., and Brook G.B. (Eds). Smithells light metals handbook (1998), Reed Educational and Professional Publishing Ltd., USA p. 5, 40-54
3. Ferkel H., and Mordike B.L. Mater Sci Eng A 298 (2001) 193-199
4. Hassan S.F., and Gupta M. Compos Struct 72 (2006) 19-26
5. Hassan S.F., and Gupta M. J Mater Sci 41 (2006) 2229-2236
6. Goh C.S., Wei J., Lee L.C., and Gupta M. Nanotechnology 17 (2006) 7-12
7. Hassan S.F., and Gupta M. J Alloy Compd 345 (2002) 246-251
8. Perez P., Garces G., and Adeva P. Compos Sci Technol 64 (2004) 145-151
9. Wong W.L.E., and Gupta M. Adv Eng Mater 7 (2005) 250-256
10. Hassan S.F., and Gupta M. J Alloy Compd 335 (2002) L10-L15
11. Huard G., Angers R., Krishnadev M.R., Tremblay R., and Dube D. Canada Metall Quart 38 (1999) 193-200
12. Morisada Y., Fujii H., Nagaoka T., and Fukusumi M. Mater Sci Eng A 433 (2006) 50-54
13. Morisada Y., Fujii H., Nagaoka T., and Fukusumi M. Scripta Mater 55 (2006) 1067-1070
14. Morisada Y., Fujii H., Nagaoka T., and Fukusumi M. Mater Sci Eng A 419 (2006) 344-348
15. Ding W.B., Jiang H.Y., Zeng X.Q., Li D.H., and Yao S.S. Appl Surf Sci 253 (2007) 3877-3883
16. Ding W., Jiang H., Zeng X., Li D., and Yao S. Mater Lett 61 (2007) 496-501
17. Wenbin D., Haiyan J., Xiaoqin Z., Dehui L., and Shoushan Y. J Alloy Compd 429 (2007) 233-341
18. Mizuuchi K., Inoue K., Hamada K., Sugioka M., Itami M., Fukusumi M., et al. Mater Sci Eng A 367 (2004) 343-349
19. Nguyen Q.B., and Gupta M. J Alloy Compd 459 (2007) 244-250
20. Paramsothy M., Srikanth N., and Gupta M. Processing, microstructure and properties of a Mg/Al bimetal macrocomposite. J Compos Mater (2008) 10.1177/002199830809836
21. Paramsothy M., Srikanth N., and Gupta M. J Alloy Compd 461 (2008) 200-208
22. Paramsothy M., Srikanth N., and Gupta M. J Comp Mater 42 13 (2008) 1297-1307
23. Paramsothy M., Srikanth N., Hassan S.F., and Gupta M. Mater Sci Eng A 494 (2008) 436-444
24. Paramsothy M., Hassan S.F., Srikanth N., and Gupta M. J Phys D 41 (2008) 175402-175410
25. Abbasi M., Taheri A.K., and Salehi M.T. J Alloy Compd 319 (2001) 233-241
26. Dyja H., Mroz S., and Stradomski Z. Metalurgija 42 (2003) 185-191
27. Dyja H., Mroz S., and Milenin A. J Mater Proc Technol 153-154 (2004) 100-107
28. Krishna B.V., Venugopal P., and Rao K.P. Mater Sci Eng A 407 (2005) 77-83
29. Krishna B.V., Venugopal P., and Rao K.P. Mater Sci Eng A 386 (2004) 301-317
30. Jiang F., Zhao K., and Sun J. Int J Press Vess Pip 80 (2003) 129-137
31. Manesh H.D., and Taheri A.K. J Alloy Compd 361 (2003) 138-143
32. Kapinski S. J Mater Proc Technol 60 (1996) 197-200
33. Marukovich E.I., Branovitsky A.M., Na Y.-S., Lee J.-H., and Choi K.-Y. Mater Design 27 10 (2006) 1016-1026
34. An J., Liu Y.B., Zhang M.Z., and Yang B. J Mater Proc Technol 120 (2002) 30-36
35. Mamalis A.G., Szalay A., Vaxevanidis N.M., and Pantelis D.I. Mater Sci Eng A 188 (1994) 267-275
36. Tham L.M., Gupta M., and Cheng L. Mater Sci Technol 15 (1999) 1139-1146
37. Gupta M., Lai M.O., and Lim S.C. J Alloy Compd 260 (1997) 250-255
38. Ganesh V.V., and Gupta M. Mater Res Bull 35 (2000) 2275-2286
39. Paramsothy M., Hassan S.F., Srikanth N., and Gupta M. Mater Sci Forum 618-619 (2009) 221-225
40. Paramsothy M., Hassan S.F., Srikanth N., and Gupta M. J Alloy Compd (2009) 10.1016/j.jallcom.2009.03.18
41. Avedesian M.M., and Baker H. ASM specialty handbook: magnesium and magnesium alloys (1999), ASM International, Ohio p. 4-6, 10, 11, 28, 37, 258, 259, 274
42. Al-Saleh M.H., and Sundararaj U. A review of vapor grown carbon nanofiber/polymer conductive composites. Carbon (2008) 10.1016/j.carbon.2008.09.03
43. Frost H.J., and Ashby M.F. Deformation-mechanism maps. The plasticity and creep of metals and ceramics (1982), Pergamon Press Ltd., Oxford p. 21, 44
44. Han B.Q., and Dunand D.C. Mater Sci Eng A 277 (2000) 297-304
45. Eustathopoulos N., Nicholas M.G., and Drevet B. Wettability at high temperatures vol. 3 (1999), Pergamon Materials Series, Pergamon, New York
46. Gilchrist J.D. Extraction metallurgy. 3rd ed. (1989), Pergamon Press, New York
47. Gupta M., Lai M.O., and Soo C.Y. Mater Sci Eng A 210 (1996) 114-122
48. Hassan S.F., and Gupta M. J Alloys Compd 419 (2006) 84-90
49. Molina J.M., Voytovych R., Louis E., and Eustathopoulos N. Int J Adhes Adhes 27 (2007) 394-401
50. Shen P., Nose M., Fujii H., and Nogi K. Thin Solid Films 515 4 (2006) 2009-2014
51. Cahn R.W. Physical metallurgy (1970), North-Holland, Amsterdam p. 397-9
52. ®; 1990. p. 101-2.
53. Garces G., Perez P., and Adeva P. Scripta Mater 52 (2005) 615-619
54. Mackenzie L.W.F., Davis B., Humphreys F.J., and Lorimer G.W. Mater Sci Technol 23 10 (2007) 1173-1180
55. Jager A., Lukac P., Gartnerova V., Haloda J., and Dopita M. Mater Sci Eng A 432 (2006) 20-25
56. Hassan S.F., and Gupta M. Metall Mater Trans A 36 8 (2005) 2253-2258
57. Babić D., Klein D.J., and Schmalz T.G. J Mol Graph Model 19 (2001) 222-231
58. Szaraz Z., Trojanova Z., Cabbibo M., and Evangelista E. Mater Sci Eng A 462 (2007) 225-229
59. Dai L.H., Ling Z., and Bai Y.L. Compos Sci Technol 61 (2001) 1057-1063
60. Hull D., and Bacon D.J. Introduction to dislocations. 4th ed. (2002), Butterworth-Heinemann, Oxford p. 43, 231
61. George R., Kashyap K.T., Rahul R., and Yamdagni S. Scripta Mater 53 (2005) 1159-1163
62. Mukai T., Yamanoi M., Watanabe H., and Higashi K. Scripta Mater 45 (2001) 89-94
63. Laser T., Hartig C., Nurnberg M.R., Letzig D., and Bormann R. Acta Mater 56 (2008) 2791-2798
64. Bohlen J., Yi S.B., Swiostek J., Letzig D., Brokmeier H.G., and Kainer K.U. Scripta Mater 53 (2005) 259-264
65. Hassan S.F., and Gupta M. J Alloy Compd 429 (2007) 176-183
66. Dieter G.E. Mechanical metallurgy. SI metric edn. (1988), McGraw-Hill Book Company, London
67. Lohbauer U., Frankenberger R., Clare A., Petschelt A., and Greil P. Biomaterials 25 (2004) 5217-5225
68. Hammouda I.M. J Mech Behavior Biomed Mater 2 (2009) 73-81
69. Spencer K., Corbin S.F., and Lloyd D.J. Mater Sci Eng A 325 (2002) 394-404
70. Hu X.H., Jain M., Wilkinson D.S., and Mishra R.K. Microstructure-based finite element analysis of strain localization behavior in AA5754 aluminum sheet. Acta Mater (2007) 10.1016/j.actamat.2008.02.04
71. Batra R.C., and Wei Z.G. Int J Impact Eng 34 (2007) 448-463
72. Wang T.S., Hou R.J., Lv B., Zhang M., and Zhang F.C. Mater Sci Eng A 465 (2007) 68-71