Corrosion protection of Sunselect, a spectrally selective solar absorber coating, by (3-mercaptopropyl)trimethoxysilane

Solar Energy Materials and Solar Cells

Volumn 93, Issue 10, 2009, Pages 1733-1742

  Koželj, Matjaž ^a   Vuk, Angela Šurca ^a   Jerman, Ivan ^a   Orel, Boris ^a  

^a NATIONAL INSTITUTE OF CHEMISTRY   (Slovenia)

Author keywords

Cermets; Corrosion; Mercaptosilane; Sol gel; Solar absorbers

Indexed keywords

ANTIREFLECTIVE; CORROSION STABILITY; DEPTH PROFILE; DIP COATING; HYDROLYSIS AND CONDENSATION; INFRARED REFLECTIONS; MERCAPTOSILANE; OXIDE LAYER; POTENTIODYNAMICS; PROTECTIVE LAYERS; REDOX PROBE; SALT SPRAY; SELECTIVE COATINGS; SOL-GEL COATINGS; SOLAR ABSORPTANCE; SPECTRAL SELECTIVITY; SPECTRALLY SELECTIVE SOLAR ABSORBERS; SPECTROSCOPIC TECHNIQUE; THERMAL EMITTANCE; TRIMETHOXYSILANE; XPS;

ABSORPTION SPECTROSCOPY; CERMETS; COATINGS; CONDENSATION REACTIONS; CORROSION PROTECTION; CORROSION RESISTANCE; CYCLIC VOLTAMMETRY; GELATION; GELS; INFRARED SPECTROSCOPY; SOL-GEL PROCESS; SOL-GELS; SOLS; TIN; X RAY PHOTOELECTRON SPECTROSCOPY;

SOLAR ABSORBERS;

EID: 68349083495     PISSN: 09270248     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.solmat.2009.05.023     Document Type: Article

References (74)

1. FW6 EU Project, Development of unglazed solar absorbers (resorting to coloured selective coatings on steel material) for building facades, and integration into heating systems (SOLABS), 〈http://cordis.europa.eu/data/PROJ_FP5/ACTIONeqDndSESSIONeq112362005919ndDOCeq604ndTBLeqEN_PROJ.htm〉.
2. Orel B., Spreizer H., Slemenik Perse L., Fir M., Surca Vuk A., Merlini D., Vodlan M., and Kohl M. Silicone-based thickness insensitive spectrally selective (TISS) paints as selective paint coatings for coloured solar absorbers (part I). Sol. Energy Mater. Sol. Cells 91 (2007) 93-107
3. Orel B., Spreizer H., Surca Vuk A., Fir M., Merlini D., Vodlan M., and Kohl M. Selective paint coatings for coloured solar absorbers: polyurethane thickness insensitive spectrally selective (TISS) paints (part II). Sol. Energy Mater. Sol. Cells 91 (2007) 108-119
4. Botten L.C., and Ritchie I.T. Improvements in design of solar selective thin-film absorbers. Opt. Commun. 23 (1977) 421-426
5. 3 cermet films. Phys. Rev. B 43 (1991) 13838-13845
6. 3 composite films. J. Appl. Phys. 55 (1984) 3382-3410
7. Window B., Ritchie I.T., and Cathro K. Selective electroplated chromium blacks. Appl. Opt. 17 (1978) 2637-2644
8. 3 cermet solar absorbers by rf planar magnetron sputtering for high-temperature applications. Sol. Energy Mater. 18 (1989) 343-356
9. C.E. Kennedy, NREL/TP-520-31267, Review of mid- to high-temperature solar selective absorber materials, National Renewable Energy Laboratory, Golden, CO, 2002.
10. In: Granqvist C.G. (Ed). Materials Science for Solar Energy Conversion Systems (1991), Pergamon Press, Oxford, England
11. K.G.W. Reichert, Witterungsbestaendiges verbundmaterial, EP 1 867 934, 2007.
12. Schuler A., Videnovic I.R., Oelhafen P., and Brunold S. Titanium-containing amorphous hydrogenated silicon carbon films (a-Si: C: H/Ti) for durable solar absorber coatings. Sol. Energy Mater. Sol. Cells 69 (2001) 271-284
13. 3/Al solar absorber surfaces. Sol. Energy Mater. Sol. Cells 82 (2004) 361-373
14. Nostell P., Roos A., and Karlsson B. Antireflection of glazings for solar energy applications. Sol. Energy Mater. Sol. Cells 54 (1998) 223-233
15. Wackelgard E., and Hultmark G. Industrially sputtered solar absorber surface. Sol. Energy Mater. Sol. Cells 54 (1998) 165-170
16. Wackelgard E. Characterization of black nickel solar absorber coatings electroplated in a nickel chlorine aqueous solution. Sol. Energy Mater. Sol. Cells 56 (1998) 35-44
17. Katumba G., Olumekor L., Forbes A., Makiwa G., Mwakikunga B., Lu J., and Wackelgard E. Optical, thermal and structural characteristics of carbon nanoparticles embedded in ZnO and NiO as selective solar absorbers. Sol. Energy Mater. Sol. Cells 92 (2008) 1285-1292
18. Bostrom T., Westin G., and Wackelgard E. Optimization of a solution-chemically derived solar absorbing spectrally selective surface. Sol. Energy Mater. Sol. Cells 91 (2007) 38-43
19. 2 solar thermal selective absorbers. Sol. Energy Mater. Sol. Cells 92 (2008) 1177-1182
20. http://solec.org/SOLKOTEMenu.htm
21. Brunold S., Frei U., Carlsson B., Moller K., and Kohl M. Round robin on accelerated life testing of solar absorber surface durability. Sol. Energy Mater. Sol. Cells 61 (2000) 239-253
22. Guglielmi M. Sol-gel coatings on metals. J. Sol-Gel Sci. Technol. 8 (1997) 443-449
23. Twite R.L., and Bierwagen G.P. Review of alternatives to chromate for corrosion protection of aluminum aerospace alloys. Prog. Org. Coat. 33 (1998) 91-100
24. Zhu D.Q., and van Ooij W.J. Enhanced corrosion resistance of AA 2024-T3 and hot-dip galvanized steel using a mixture of bis-[triethoxysilylpropyl]tetrasulfide and bis-[trimethoxysilylpropyl]amine. Electrochim. Acta 49 (2004) 1113-1125
25. Zucchi F., Frignani A., Grassi V., Trabanelli G., and DalColle M. The formation of a protective layer of 3-mercapto-propyl-trimethoxy-silane on copper. Corros. Sci. 49 (2007) 1570-1583
26. Zhu D.Q., and van Ooij W.J. Corrosion protection of AA 2024-T3 by bis-[3-(triethoxysilyl)propyl]tetrasulfide in neutral sodium chloride solution, part 1: corrosion of AA 2024-T3. Corros. Sci. 45 (2003) 2163-2175
27. Zhu D.Q., and van Ooij W.J. Corrosion protection of AA 2024-T3 by bis-[3-(triethoxysilyl)propyl]tetrasulfide in sodium chloride solution, part 2: mechanism for corrosion protection. Corros. Sci. 45 (2003) 2177-2197
28. Cabral A., Duarte R.G., Montemor M.F., Zheludkevich M.L., and Ferreira M.G.S. Analytical characterisation and corrosion behaviour of bis-[triethoxysilylpropyl]tetrasulphide pre-treated AA2024-T3. Corros. Sci. 47 (2005) 869-881
29. Fir M., Orel B., Surca Vuk A., Vilcnik A., Jese R., and Francetic V. Corrosion studies and interfacial bonding of urea/poly(dimethylsiloxane) sol/gel hydrophobic coatings on AA 2024 aluminum alloy. Langmuir 23 (2007) 5505-5514
30. Surca Vuk A., Fir M., Jese R., Vilcnik A., and Orel B. Structural studies of sol-gel urea/polydimethylsiloxane barrier coatings and improvement of their corrosion inhibition by addition of various alkoxysilanes. Prog. Org. Coat. 63 (2008) 123-132
31. Metroke T.L., Kachurina O., and Knobbe E.T. Spectroscopic and corrosion resistance characterization of amine and super acid-cured hybrid organic-inorganic thin films on 2024-T3 aluminum alloy. Prog. Org. Coat. 44 (2002) 185-199
32. Zandi-zand R., Ershad-langroudi A., and Rahimi A. Silica based organic-inorganic hybrid nanocomposite coatings for corrosion protection. Prog. Org. Coat. 53 (2005) 286-291
33. van Ooij W.J., and Child T. Protecting metals with silane coupling agents. Chemtech 28 (1998) 26-35
34. Franquet A., Le Pen C., Terryn H., and Vereecken J. Effect of bath concentration and curing time on the structure of nonfunctional thin organosilane layers on aluminium. Electrochim. Acta 48 (2003) 1245-1255
35. Loy D.A., Mather B., Straumanis A.R., Baugher C., Schneider D.A., Sanchez A., and Shea K.J. Effect of ph on the gelation time of hexylene-bridged polysilsesquioxanes. Chem. Mater. 16 (2004) 2041-2043
36. Nalwa H.S. Handbook of Organic-Inorganic Hybrid Materials and Nanocomposites vol. 1 (2003), American Scientific Publishers, Stevenson Ranch, CA
37. Abe Y., and Gunji T. Oligo- and polysiloxanes. Prog. Polym. Sci. 29 (2004) 149-182
38. Voronkov M.G., and Lavrentyev V.I. Polyhedral oligosilsesquioxanes and their homo derivatives. Top. Curr. Chem. 102 (1982) 199-236
39. Metroke T.L., Gandhi J.S., and Apblett A. Corrosion resistance properties of ormosil coatings on 2024-T3 aluminum alloy. Prog. Org. Coat. 50 (2004) 231-246
40. Aoki K., Akimoto K., Tokuda K., Matsuda H., and Osteryoung J. Linear sweep voltammetry at very small stationary disk electrodes. J. Electroanal. Chem. 171 (1984) 219-230
41. Collinson M.M., Wang H.M., Makote R., and Khramov A. The effects of drying time and relative humidity on the stability of sol-gel derived silicate films in solution. J. Electroanal. Chem. 519 (2002) 65-71
42. Che G.L., and Cabrera C.R. Molecular recognition based on (3-mercaptopropyl) trimethoxysilane modified gold electrodes. J. Electroanal. Chem. 417 (1996) 155-161
43. Sheffer M., Vivier V., and Mandler D. Self-assembled monolayers on Au microelectrodes. Electrochem. Comm. 9 (2007) 2827-2832
44. Glidewell C. Metal acetylacetonate complexes: preparation and characterization. In: Woollins J.D. (Ed). Inorganic Experiments. second ed. (2003), Wiley-VCH, New York 149-155
45. Moulder J.F., Stickle W.F., Sobol P.E., and Bomben K.D. Handbook of X-ray Photoelectron Spectroscopy (1995), Physical Electronics Inc., Eden Prairie, MN, USA
46. van Ooij W.J., Zhu D., Stacy M., Seth A., Mugada T., Gandhi J., and Puomi P. Corrosion protection properties of organofunctional silanes-an overview. Tsinghua Sci. Technol. 10 (2005) 639-664
47. Pleuddemann E.P. Encyclopedia of Polymer Science Engineering (1986), Wiley, New York p. 284
48. Franquet A., Terryn H., and Vereecken J. Study of the effect of different aluminium surface pretreatments on the deposition of thin non-functional silane coatings. Surf. Interface Anal. 36 (2004) 681-684
49. V.C. Farmer, The anhydrous minerals, in: V.C. Farmer (Ed.), The Infrared Spectra of Minerals, Mineralogical Society, London, 1974, p. 186 (Chapter 10).
50. 2/Sb powder-preparation and optical-properties. J. Mater. Sci. 27 (1992) 313-318
51. 2-F film on glass and black enameled steel substrates-spray pyrolytical deposition and optical-properties. Sol. Energy Mater. Sol. Cells 26 (1992) 105-116
52. 2 sol-gel-derived films for counterelectrode applications in electrochromic devices. J. Mater. Chem. 5 (1995) 617-624
53. Ulman A. Formation and structure of self-assembled monolayers. Chem. Rev. 96 (1996) 1533-1554
54. Antonijevic M.M., and Petrovic M.B. Copper corrosion inhibitors. A review. Int. J. Electrochem. Sci. 3 (2008) 1-28
55. Sugahara Y., Okada S., Sato S., Kuroda K., and Kato C. Si-29-NMR study of hydrolysis and initial polycondensation processes of organoalkoxysilanes, 2. Methyltriethoxysilane. J. Non-Cryst. Solids 167 (1994) 21-28
56. Miller C.R., Vogel R., Surawski P.P.T., Jack K.S., Corrie S.R., and Trau M. Functionalized organosilica microspheres via a novel emulsion-based route. Langmuir 21 (2005) 9733-9740
57. Li Y.S., Wang Y., Tran T., and Perkins A. Vibrational spectroscopic studies of (3-mercaptopropyl)trimethoxylsilane sol-gel and its coating. Spectrochim. Acta A 61 (2005) 3032-3037
58. 12)-model compounds for surface-modified silica-gels. J. Organomet. Chem. 489 (1995) 185-194
59. Kozelj M., and Orel B. Synthesis of polyhedral phenylsilsesquioxanes with KF as the source of the fluoride ion. Dalton Trans. (2008) 5072-5075
60. Brinker C.J., and Scherer G.W. Sol-Gel Science (1990), Academic Press, Boston pp. 97-233
61. Bagiyan G.A., Koroleva I.K., Soroka N.V., and Ufimtsev A.V. Oxidation of thiol compounds by molecular oxygen in aqueous solutions. Russ. Chem. Bull. 52 (2003) 1135-1141
62. Zheludkevich M.L., Yasakau K.A., Bastos A.C., Karavai O., and Ferreira M.G.S. On the application of electrochemical impedance spectroscopy to study the self-healing properties of protective coatings. Electrochem. Commun. 9 (2007) 2622-2628
63. Köhl B.C.M., Jorgensen G., and Czanderna A.W. Performance and Durability Assessment: Optical Materials for Solar Thermal Systems (2004), Elsevier, The Netherlands
64. Hutchins M.G. Spectrally selective materials for efficient visible, solar and thermal radiation control. In: Santamouris M. (Ed). Solar Thermal Technologies for Buildings (2003), James & James, London
65. Tremont R., De Jesus-Cardona H., Garcia-Orozco J., Castro R.J., and Cabrera C.R. 3-mercaptopropyltrimethoxysilane as a Cu corrosion inhibitor in KCl solution. J. Appl. Electrochem. 30 (2000) 737-743
66. Janek R.P., Fawcett W.R., and Ulman A. Impedance spectroscopy of self-assembled monolayers on Au(1 1 1): sodium ferrocyanide charge transfer at modified electrodes. Langmuir 14 (1998) 3011-3018
67. 3)(6)(3+) redox reactions. J. Phys. Chem. B 109 (2005) 16372-16381
68. Hintze P.E., and Calle L.M. Electrochemical properties and corrosion protection of organosilane self-assembled monolayers on aluminum 2024-T3. Electrochim. Acta 51 (2006) 1761-1766
69. Wang D.H., Ni Y.H., Huo Q., and Tallman D.E. Self-assembled monolayer and multilayer thin films on aluminum 2024-T3 substrates and their corrosion resistance study. Thin Solid Films 471 (2005) 177-185
70. Demoz A., and Harrison D.J. Characterization of extremely low defect density hexadecanethiol monolayers on Hg surfaces. Langmuir 9 (1993) 1046-1050
71. Weast R.C. Handbook of Chemistry and Physics: A Ready-Reference Book of Chemical and Physical Data (1974), CRC Press, Cleveland, OH
72. Greenler R.G. Design of a reflection-absorption experiment for studying IR-spectrum of molecules adsorbed on a metal-surface. J. Vac. Sci. Technol. 12 (1975) 1410-1417
73. Paints and varnishes-cross-cut test ISO 2409, 2007.
74. http://www.iea-shc.org/task39/index.html