Efficiency optimization of a 100-W 500 000-r/min permanent-magnet machine including air-friction losses

IEEE Transactions on Industry Applications

Volumn 45, Issue 4, 2009, Pages 1368-1377

  Luomi, Jorma ^a   Zwyssig, Christof ^b   Looser, Andreas ^c   Kolar, Johann W ^c  

^a AALTO UNIVERSITY   (Finland)

^b Celeroton   (Switzerland)

^c ETH ZURICH   (Switzerland)

Author keywords

Air friction; High speed; Optimization; Permanent magnet (PM)

Indexed keywords

AIR FRICTION; AMORPHOUS IRON; ANALYTICAL METHOD; BEARING LOSS; DESIGN CONSTRAINTS; EDDY CURRENT-LOSS; EFFICIENCY OPTIMIZATION; FRICTION LOSS; HIGH SPEED; LOSS MINIMIZATION; OPTIMUM DESIGNS; PERMANENT-MAGNET MACHINE; ROTOR DIAMETER; STATOR CORE; ULTRA HIGH SPEED;

AMORPHOUS SILICON; COREMAKING; ELECTRIC MACHINERY; FRICTION; LAMINATING; MAGNETIC DEVICES; OPTIMIZATION; PERMANENT MAGNETS; SPEED; STATORS; TRIBOLOGY;

MACHINE DESIGN;

EID: 68249144258     PISSN: 00939994     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIA.2009.2023492     Document Type: Article

References (21)

1. M. A. Rahman, A. Chiba, and T. Fukao, "Super high speed electrical machines - Summary," in Proc. IEEE Power Eng. Soc. Gen. Meeting, Jun. 6-10, 2004, vol. 2, pp. 1272-1275.
2. C. Zwyssig, S. D. Round, and J. W. Kolar, "Analytical and experimental investigation of a low torque, ultra-high speed drive system," in Conf. Rec. 41st IEEE IAS Annu. Meeting, Tampa, FL, Oct. 8-12, 2006, vol. 3, pp. 1507-1513.
3. C. Zwyssig, J. W. Kolar, W. Thaler, and M. Vohrer, "Design of a 100 W, 500 000 rpm permanent-magnet generator for mesoscale gas turbines," in Conf. Rec. 40th IEEE IAS Annu. Meeting, Hong Kong, Oct. 2-6, 2005, vol. 1, pp. 253-260.
4. J. D. Ede, Z. Q. Zhu, and D. Howe, "Optimal split ratio for high-speed permanent magnet brushless DC motors," in Proc. Int. Conf. Elect. Mach. Syst., Shenyang, China, 2001, pp. 909-912.
5. N. Bianchi, S. Bolognani, and F. Luise, "Potentials and limits of high-speed PM motors," IEEE Trans. Ind. Appl., vol. 40, no. 6, pp. 1570-1578, Nov./Dec. 2004.
6. Z. Q. Zhu, D. Howe, E. Bolte, and B. Ackermann, "Instantaneous magnetic field distribution in brushless permanent magnet dc motors, Part I: Open-circuit field," IEEE Trans. Magn., vol. 29, no. 1, pp. 124-135, Jan. 1993.
7. U. Kim and D. K. Lieu, "Magnetic field calculation in permanent magnet motors with rotor eccentricity: Without slotting effect," IEEE Trans. Magn., vol. 34, no. 4, pp. 2243-2252, Jul. 1998.
8. K. F. Rasmussen, J. H. Davies, T. J. E. Miller, M. I. McGilp, and M. Olaru, "Analytical and numerical computation of air-gap magnetic fields in brushless motors with surface permanent magnets," IEEE Trans. Ind. Appl., vol. 36, no. 6, pp. 1547-1554, Nov./Dec. 2000.
9. Z. Q. Zhu, D. Howe, and C. C. Chan, "Improved analytical model for predicting the magnetic field distribution in brushless permanentmagnet machines," IEEE Trans. Magn., vol. 38, no. 1, pp. 229-238, Jan. 2002.
10. T. Modeer, "On stator yoke rotational iron losses in permanent magnet machines," presented at the Int. Conf. Electrical Machines (ICEM), Chania, Greece, Sep. 2-5, 2006, 5 pp, Paper OTA4-1.
11. L. Atallah, Z. Q. Zhu, D. Howe, and T. Birch, "Armature reaction field and winding inductances of slotless permanent-magnet brushlesss machines," IEEE Trans. Magn., vol. 34, no. 5, pp. 3737-3744, Sep. 1998.
12. K. Ng, Z. Q. Zhu, and D. Howe, "Open-circuit field distribution in a brushless motor with diametrically magnetized PM rotor, accounting for slotting and eddy current effects," IEEE Trans. Magn., vol. 32, no. 5, pp. 5070-5072, Sep. 1996.
13. R. Holm, H. Polinder, and J. A. Ferreira, "Analytical modeling of a permanent-magnet synchronous machine in a flywheel," IEEE Trans. Magn., vol. 43, no. 5, pp. 1955-1967, May 2007.
14. J. A. Ferreira, Electromagnetic Modeling of Power Electronic Converters. Norwell, MA: Kluwer, 1989.
15. X. Nan and C. R. Sullivan, "An equivalent complex permeability model for Litz-wire windings," in Conf. Rec. 40th IEEE IAS Annu. Meeting Hong Kong, Oct. 2-6, 2005, vol. 3, pp. 2229-2235.
16. M. Mack, "Luftreibungsverluste bei Elektrischen Maschinen kleiner Baugrösse," Ph.D. dissertation, Universität Stuttgart, Stuttgart, Germany, 1967.
17. "Pack Feindrahte," Litz Wire Table, May 2, 2007. [Online]. Available: http://www.pack-feindraehte.de
18. B. Schneider, M. Bruderer, D. Dyntar, C. Zwyssig, M. Diener, K. Boulouchos, R. S. Abhari, L. Guzzella, and J. W. Kolar, "Ultra-high-energy-density converter for portable power," in Proc. Int. Workshop Micro Nanotechnol. Power Generation Energy Convers. Appl. Tokyo, Japan, Nov. 28-30, 2005, pp. 81-84.
19. C. Zwyssig, D. Krähenbühl, H. Weser, and J. W. Kolar, "A miniature turbocompressor system," in Proc. Smart Energy Strategies Zurich, Switzerland, Sep. 2008, pp. 144-149.
20. V. Gass, B. H. van der Schoot, S. Jeanneret, and N. F. de Rooij, "Microtorque sensor based on differential force measurement," in Proc. IEEE Workshop Micro Electro Mech. Syst., Oiso, Japan, Jan. 25-28, 1994, pp. 241-244.
21. H. Ota, T. Ohara, Y. Karata, S. Nakasima, and M. Takeda, "Novel micro torque measurement method for microdevices," J. Micromech. Microeng. vol. 11, no. 5, pp. 595-602, Sep. 2001.