Shape-memory NiTi-Nb foams

Journal of Materials Research

Volumn 24, Issue 6, 2009, Pages 2107-2117

  Bansiddhi, Ampika ^a   Dunand, David C ^b  

^a KASETSART UNIVERSITY   (Thailand)

^b Northwestern University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BONE IMPLANT; COMPRESSIVE FAILURE; COMPRESSIVE STRAIN; DUCTILE BEHAVIOR; EUTECTIC LIQUID; INTERCONNECTED PORES; NB ADDITION; NI-TI-NB; NITI POWDERS; OPEN-CELL FOAMS; POROUS NI-TI; RECOVERY STRAIN; SHAPE-MEMORY; THERMOMECHANICAL PROPERTIES;

BIOCOMPATIBILITY; CELL MEMBRANES; LIQUIDS; METAL RECOVERY; METALLURGY; POWDERS; SINTERING; SODIUM CHLORIDE; STRAIN;

NIOBIUM;

EID: 68149141353     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2009.0256     Document Type: Article

References (53)

1. K. Otsuka and C.M. Wayman: Shape Memory Materials (Cambridge University Press, Cambridge, UK, 1998), p. 284.
2. B.Y. Li, LJ. Rong, and Y.Y. Li: Stress-strain behavior of porous Ni-Ti shape memory intermetallics synthesized from powder sintering. Intermetallics 8, 643 (2000).
3. S.L. Zhu, X.J. Yang, F. Hu, S.H. Deng, and Z.D. Cui: Processing of porous TiNi shape memory alloy from elemental powders by Ar-sintering. Mater. Lett. 58, 2369 (2004).
4. M. Arciniegas, C. Aparicio, J.M. Manero, and F.J. Gil: Low elastic modulus metals for joint prosthesis: Tantalum and nickeltitanium foams. J. Eur. Ceram. Soc. 27, 3391 (2007).
5. C.L. Chu, C.Y. Chung, P.H. Lin, and S.D. Wang: Fabrication of porous NiTi shape memory alloy for hard tissue implants by combustion synthesis. Mater. Sci. Eng., A 366, 114 (2004).
6. B.Y. Li, LJ. Rong, Y.Y. Li, and V.E. Gjunter: Fabrication of cellular NiTi intermetallic compounds. J. Mater. Res. 15, 10 (2000).
7. B. Yuan, M. Zhu, Y. Gao, X. Li, and C.Y. Chung: Forming and control of pores by capsule-free hot isostatic pressing in NiTi shape memory alloys. Smart Mater. Struct. 17, 025013 (2008).
8. C. Greiner, S.M. Oppenheimer, and D.C. Dunand: High strength, low stiffness, porous NiTi with superelastic properties. Acta Biomater. 1, 705 (2005).
9. D.C. Lagoudas and E.L. Vandygriff: Processing and characterization of NiTi porous SMA by elevated pressure sintering. J. Intell. Mater. Syst. Struct. 13, 837 (2002).
10. M. Sugiyama, S.K. Hyun, M. Tane, and H. Nakajima: Fabrication of lotus-type porous NiTi shape memory alloys using the continuous zone melting method and tensile property. High Temp. Mater. Processes 26, 297 (2007).
11. M. Kohl, M. Bram, P. Buchkremer, D. Stover, T. Habijan, and M. Koller: Production of Highly Porous Near-Net-Shape NiTi Components for Biomedical Applications (Porous Metals and Metallic Foams Conference, Montreal, QC, Canada, 2007), p. 295.
12. A. Bansiddhi and D.C. Dunand: Shape-memory NiTi foams produced by replication of NaCl sapce-holders. Acta Biomater. 4, 1996 (2008).
13. A. Bansiddhi and D. Dunand: Shape-memory NiTi foams produced by solid-state replication with NaF. Intermetallics 15, 1612 (2007).
14. Y.P. Zhang, D.S. Li, and X.P. Zhang: Gradient porosity and large pore size NiTi shape memory alloys. Scr. Mater. 57, 1020 (2007).
15. 3) and capsule-free hot isostatic pressing. J. Mater. Process. Technol. 192, 439 (2007).
16. J.D. Bobyn, R.M. Pilliar, H.U. Cameron, and G.C. Weatherly: The optimum pore-size for the fixation of porous-surfaced metal implants by the ingrowth of bone. Clin. Orthop. Relat. Res. 150, 263 (1980).
17. M. Bram, A. Ahmad-Khanlou, A. Heckmann, B. Fuchs, H.P. Buchkremer, and D. Stover: Powder metallurgical fabrication processes for NiTi shape memory alloy parts. Mater. Sci. Eng., A 337, 254 (2002).
18. A.M. Locci, R. Orru, G. Cao, and Z.A. Munir: Field-activated pressure-assisted synthesis of NiTi. Intermetallics 11, 555 (2003).
19. B. Yuan, X.P. Zhang, C.Y. Chung, M.Q. Zeng, and M. Zhu: A comparative study of the porous TiNi shape-memory alloys fabricated by three different processes. Metall. Mater. Trans. A 37, 755 (2006).
20. D.T. Queheillalt, Y. Katsumura, and H.N.G. Wadley: Synthesis of stochastic open cell Ni-based foams. Scr. Mater. 50, 313 (2004).
21. D.T. Queheillalt, D.D. Hass, D.J. Sypeck, and H.N.G. Wadley: Synthesis of open-cell metal foams by templated directed vapor deposition. J. Mater. Res. 16, 1028 (2001).
22. P. Quadbeck, J. Kaschta, and R.F. Singer: Superalloy IN625 with cellular microstructure: Fabrication route and mechanical properties. Adv. Eng. Mater. 6, 635 (2004).
23. 50 shape memory alloy using pure Cu and Ti-15Cu-15Ni foils. Intermetallics 12, 1285 (2004).
24. C. van der Eijk, Z.K. Sallom, and O.M. Akselsen: Microwave brazing of NiTi shape with Ag-Ti and Ag-Cu-Ti memory alloy alloys. Scr. Mater. 58, 779 (2008).
25. D.S. Grummon, J.A. Shaw, and J. Foltz: Fabrication of cellular shape memory alloy materials by reactive eutectic brazing using niobium. Mater. Sci. Eng., A 438, 1113 (2006).
26. J.A. Shaw, D.S. Grummon, and J. Foltz: Superelastic NiTi honeycombs: Fabrication and experiments. Smart Mater. Struct. 16, S170 (2007).
27. T.B. Reed: Free Energy of Formation of Binary Compounds: An Atlas of Charts for High-Temperature Chemical Calculations (The MIT Press, Cambridge, MA, 1971), p. 81.
28. H.B. Yang, W.H. Ying, Z.P. Yang, J.Y. Lin, X.M. Zhang, and J.H. Guo: Product microstructure of Ti-Ni-Nb shape memory alloy (SMA) by high-temperature synthesis (SHS) of selfpropagating. Rare Metal Mater. Eng. 31, 152 (2002).
29. V.Y. Abramov, N.M. Aleksandrova, D.V. Borovkov, S.Y. Makushev, N.A. Polyakova, N.N. Popov, S.D. Prokoshkin, and I.Y. Khmelevskaya: Structure and functional properties of heat-and thermomechanically treated Ti-Ni-Nb-based alloys with a wide martensitic hysteresis. I. Ti-Ni-Nb ternary alloys. Phys. Met. Metallogr. 101, 404 (2006).
30. 20 wide transformation hysteresis shape-memory alloy. Metall. Mater. Trans. A 35, 2783 (2004).
31. X.M. He, LJ. Rong, D.S. Yan, and Y.Y. Li: TiNiNb wide hysteresis shape memory alloy with low niobium content. Mater. Sci. Eng., A 371, 193 (2004).
32. K. Uchida, N. Shigenaka, T. Sakuma, Y. Sutou, and K. Yamauchi: Effect of Nb content on martensitic transformation temperatures and mechanical properties of Ti-Ni-Nb shape memory alloys for pipe joint applications. Mater. Trans. 48, 445 (2007).
33. V.A. Udovenko, P.L. Potapov, S.D. Prokoshkin, I.Y. Khmelevskaya, V.Y. Abramov, and Y.V. Blinov: A study of the functional properties of alloy Ti-45% Ni-10% Nb with wide hysteresis of the martensitic transformation. Metal Sci. Heat Treat. 42, 353 (2000).
34. K. Hashi, K. Ishikawa, T. Matsuda, and K. Aoki: Microstructures and hydrogen permeability of Nb-Ti-Ni alloys with high resistance to hydrogen embrittlement. Mater. Trans. 46, 1026 (2005).
35. K. Kishida, Y. Yamaguchi, K. Tanaka, H. Inui, S. Tokui, K. Ishikawa, and K. Aoki: Microstructures and hydrogen permeability of directionally solidified Nb-Ni-Ti alloys with the Nb-NiTi eutectic microstructure. Intermetallics 16, 88 (2008).
36. W. Luo, K. Ishikawa, and K. Aoki: High hydrogen permeability in the Nb-rich Nb-Ti-Ni alloy. J. Alloys Compd. 407, 115 (2006).
37. T. Duerig, D. Stockel, and J. Burpee: Stent. U.S. Patent No. US 6 312 455 B2 (2001).
38. 6.0 superelastic alloy and its application to medical stents. J. Biomed. Mater. Res. B Appl. Biomater. 76, 179 (2006).
39. 9 alloy in simulated body fluids. Mater. Sci. Eng., A 438, 504 (2006).
40. H. Matsuno, A. Yokoyama, F. Watari, M. Uo, and T. Kawasaki: Biocompatibility and osteogenesis of refractory metal implants, titanium, hafnium, niobium, tantalum and rhenium. Biomaterials 22, 1253 (2001).
41. C.M. Jackson, H. J. Wagner, and RJ. Wasilewski: 55-Nitinol-The Alloy with a Memory: Its Physical Metallurgy, Properties, and Applications (National Aeronautics and Space Administration, Washington, DC, 1972).
42. S.B. Prima, L.A. Tretyachenko, and V.M. Petyukh: Phase relations in the Ti-TiNi-NbNi-Nb region of the ternary system Ti-Nb-Ni. Powder Metall. Met. Ceram. 34, 155 (1995).
43. M. Piao, S. Miyazaki, K. Otsuka, and N. Nishida: Effects of Nb addition on the microstructure of Ti-Ni alloys. Mater. Trans., JIM 33, 337 (1992).
44. W. Siegert, K. Neuking, M. Mertmann, and G. Eggeler: Influence of Nb content and processing conditions on microstructure and functional properties of NiTiNb shape-memory alloys. Mater. Sci. Forum 394-3, 361 (2001).
45. S. Matsumoto, T. Tokunaga, H. Ohtani, and M. Hasebe: Thermodynamic analysis of the phase equilibria of the Nb-Ni-Ti system. Mater. Trans. 46, 2920 (2005).
46. 9 shape memory alloy. Mater. Chem. Phys. 28, 43 (1991).
47. L.C. Zhao, T.W. Duerig, S. Justi, K.N. Melton, J.L. Proft, W. Yu, and C.M. Wayman: The study of niobium-rich precipitates in a Ni-Ti-Nb shape memory alloy. Scr. Metall. Mater. 24, 221 (1990).
48. D. Jia, W.X. Liu, Z.Z. Dong, S.J. Yu, Q. Zhang, D.F. Wang, and D.Z. Liu: Precipitations in a Ni Ti-Nb alloy during annealing. Prog. Nat. Sci. 9, 216 (1999).
49. K.L. Fukami-Ushiro and D.C Dunand: NiTi and NiTi-TiC composites. III: Shape-memory recovery: Metall. Mater. Trans. A 27, 193 (1996).
50. W. Siegert, K. Neuking, M. Mertmann, and G. Eggeler: First cycle shape memory effect in the ternary NiTiNb system. J. Phys. IV 112, 739 (2003).
51. D.C. Dunand, D. Mari, M.A.M. Bourke, and J.A. Roberts: NiTi and NiTi-TiC composites IV: Neutron diffraction study of twinning and shape-memory recovery. Metall. Mater. Trans. A 27, 2820 (1996).
52. L.J. Gibson and M.F. Ashby: Cellular Solids (Cambridge University Press, Cambridge, 1997).
53. P. Enghag: Encyclopedia of the Elements: Technical Data, History, Processing, Applications (Wiley-VCH, Weinheim, 2004).