Processing and characterization of NiTi porous SMA by elevated pressure sintering

Journal of Intelligent Material Systems and Structures

Volumn 13, Issue 12, 2002, Pages 837-850

  Lagoudas, Dimitris C ^a   Vandygriff, Eric L ^a  

^a Texas AandM University   (United States)

Author keywords

HIP; Impact loading; NiTi; Porous; Powder metallurgy; Quasi static loading; Self propagating high temperature synthesis; Shape memory alloy; Sintering

Indexed keywords

CALORIMETRY; ELECTRON MICROSCOPY; HOT ISOSTATIC PRESSING; NICKEL; OPTICAL MICROSCOPY; PHASE TRANSITIONS; POROUS MATERIALS; POWDER METALS; PRESSURE EFFECTS; SHAPE MEMORY EFFECT; SINTERING; TITANIUM;

MICROPROBE X-RAY ANALYSIS; NICKEL-TITANIUM ALLOY; POROUS SHAPE MEMORY ALLOY; SELF-PROPAGATING HIGH TEMPERATURE SYNTHESIS;

NICKEL ALLOYS;

EID: 0005036888     PISSN: 1045389X     EISSN: None     Source Type: Journal    
DOI: 10.1177/1045389X02013012009     Document Type: Article

References (40)

1. Ayers, R. A., Simske, S. J., Bateman, T. A., Petkus, A., Sachveda, R. L. C. and Gyunter, V.E. 1995. "Effects of Nitinol Implant Porosity on Cranial Bone Ingrowth and Apposition After 6 Weeks," J. Biomed. Mater. Res., 45(1):42-47.
2. Chen, Y. C. and Lagoudas, D. C. 2000. "Impact Induced Phase Transformation in Shape Memory Alloys," J. of Mech. Phys and Solids, 48:275-300.
3. Davies, N. G. and Zhen, S. 1983. "Review Metallic Foams: Their Production, Properties and Applications," J. Matrl. Sci., 18:1899-1911.
4. Davis, N. G., Teisen, J, Schuh, C. and Dunand, D. C. 2001. "Solid-state Foaming of Titanium by Superplastic Expansion of Argon-filled Pores," J. Mater. Res., 16(5):1508-1519.
5. Duerig, T. W. and Pelton, A. R. 1994. "Ti-Ni Shape Memory Alloys," In: Boyer, R., Welsch, G. and Collings, E.W. (eds.), Materials Properties Handbook: Titanium Alloys, pp. 1035-1048.
6. Entchev, P. B. and Lagoudas, D. C. 2002. "Modeling Porous Shape Memory Alloys using Micromechanical Averaging Techniques," Mech. of Mater., 34(1):1-24.
7. Fosdick, R. and Ketema, Y. 1998. "Shape Memory Alloys for Passive Vibration Damping," Journal of Intelligent Systems and Structures, 9:854-870.
8. Fremond, M. and Miyazaki, S. 1996. Shape Memory Alloys, CISM Courses and Lectures No. 351, Springer-Verlag, Cambridge.
9. Funakubo, H. 1987. Shape Memory Alloys, Gordon and Breach Science Publishers, New York.
10. Garner, L. J., Wilson, L. N., Lagoudas, D. C. and Redionitis, O. K. 2000. "Development of a Shape Memory Alloy Actuated Biomimetic Vehicle," Smart Materials and Structures, 9(5):673-683.
11. Gibson, L. J. and Ashby, M. F. 1997. Cellular Solids: Structures and Properties, 2nd edn., Cambridge University Press, Cambridge.
12. Haasters, J., Bensmann, G. and Pon, A. 1986. "Applications of the Memory Alloy NiTi as an Implant Material," NATO ASI Ser., Ser. E, 116 (Mater. Sci. Implant Orthop. Surg.), 117-124.
13. Hey, J. C. and Jardine, A. P. 1994. "Shape Memory TiNi Synthesis from Elemental Powders," Mater. Sci. Eng., A, 291-300.
14. Hey, J. C. and Jardine, A. P. 1995. "Porous TiNi Synthesis from Elemental Powders," In: Materials Research Society Symposium Proceedings in Boston.
15. Hodgson, D. E. and Brown, J. W. 2000. Using Nitinol Alloys, Shape Memory Applications, Inc.
16. Jardine, A. P., Kudva, J. M., Martin, C. and Appa, K. 1996. "Shape Memory Alloy Ti-Ni Actuators for Twist Control of Smart Wing Designs," In: SPIE Proceedings of Mathematics and Controls in Smart Structures, 2717:160-165.
17. Kato, H., Koyari, T., Tokizane, M. and Miura, S. 1993. "Stress-Strain Behavior and Shape Memory Effect in Powder Metallurgy TiNi Alloys," Acta Metall. Mater., 42(4):1351-1358.
18. Kearns, M. W., Belnkinsop, P. A. and Barber, A. C. 1988. "Manufacture of a Novel Porous Metal," International Journal of Powder Metallurgy, 24(1):59.
19. Lagoudas, D. C., Entchev, P. B. and Vandygriff, E. L. 2001. "Fabrication and Modeling of Porous Shape Memory Alloys," American Society for Composites, Tech Conf, 16.
20. Li, B., Rong, L. and Li, Y. 1994. "Porous NiTi Alloy Prepared from Elemental Powder Sintering," J. Mater. Res., 13:2847-2851.
21. Li, T. C., Qui, Y. B. and Liu, J. T. 1992. "Explosive Consolidation of Titanium-Nickel Shape-Memory Alloy from Pure Titanium Powder and Pure Nickel Powder," Journal of Materials Science, 845.
22. Massalski, T. B., 1986. "Binary Alloy Phase Diagrams," American Society for Metals, 2:1767-1768.
23. Martynov, V. Skorohod and S. Solonin. 1991. "Shape Memory and Superelasticity Behavior of Porous Ti-Ni Material," J. de Physique, 4:421-426.
24. McNeese, M. D., Lagoudas, D. C. and Pollock, T. C. 2000. "Processing of TiNi from Elemental Powders by Hot Isostatic Pressing," Matrls Sc. Engr., A280:334-348.
25. Miyazaki, S., Imai, T., Igo, Y. and Otsuka, K., 1986. "Effect of Cyclic Deformation on the Pseudoelasticity Characteristics of Ti-Ni Alloys," Metallurgical Transactions A, 17A:115-120.
26. Otsuka, K and Wayman, C.M. 1998. Shape Memory Materials, Cambridge University Press, Cambridge.
27. Qidwai, M. A., Entchev, P. B., Lagoudas, D. C. and DeGiorgi, V. G. 2001. "Modeling of the Thermomechanical Behavior of Porous Shape Memory Alloys," Int. J. of Solids and Structures, 38:8653-8671.
28. Schwartz, D. S., Shih, D. S. and Lederich, R. J. 1998. "Development and Scale-Up of the Low Density Core process for Ti-64," In: Materials Research Society Symposium Proceedings, 521:225.
29. Simske, S. J., Ayers, R. A. and Bateman, T. A. 1996. "Porous Materials for Bone Engineering," In: Ishawa, D. (ed)., Porous Materials and Tissue Engineering.
30. Tangaraj, K., Chen, Y. C. and Salama, K. 2000. "Fabrication of Porous NiTi Shape Memory Alloy by Elemental Powder Sintering", In: Redmond, J. and Main, J. (eds.), Proceedings of 2000 ASME International Mechanical Engineering Congress & Exposition.
31. Thier, M. 1990. "Shape-memory Alloys for Implants, Instruments, and External Applications in Medicine; Uses and Chances in the Future," Metall (Berlin), 44(1):29-33.
32. Thomson, P., Balas, G. J., and Leo, P. H. 1995 "The Use of Shape Memory Alloys for Passive Structural Damping," Smart Materials and Structures, 4 (March), 1:36-41.
33. Turner, T. L. 2000. "Dynamic Response Tuning of Composite Beams by Embedded Shape Memory Alloy Actuators," In: Proc. of SPIE, 3991;377-388.
34. Vandygriff, E. L., Lagoudas, D. C., Thangaraj, K. and Chen, Y. C. 2000. "Porous Shape Memory Alloys, Part I: Fabrication and Characterization", In: Proceedings of the 15th ASC Technical Conference, pp. 239-247.
35. Wayman, C. M. 1983. "Phase Transformations, Nondiffusive," In: Cahn, R. W. and Haasen, P. (eds.), Physical Metallurgy. North-Holland Physics Publishing, New York, pp. 1031-1075.
36. Wilde, K., Gardoni, P. and Fujino, Y. 2000. "Base Isolation System with Shape Memory Alloy Device for Elevated Highway Bridges," Engineering Structures, 22:222-229.
37. Wolons, D., Gandhi, F. and Malovrh, B. 1998. "Experimental Investigation of the Pseudoelastic Hysteresis Damping Characteristics of Nickel Titanium Shape Memory Alloy Wires," Journal of Intelligent Material Systems and Structures, 9:116-126.
38. Wu, S. K. and Wayman, C. M. 1989. "On the Reciprocal Lattice of the 'Premartensitic' R-phase in TiNi Shape Memory Alloys," Acta Metall., 37(10):2805-2813.
39. Yi, H. C. and Moore, J. J. 1990. "The Combustion Synthesis of Ni-Ti Shape Memory Alloys," Journal of Materials, 31.
40. Yiu, Y. C. and Regelbrugge, M. E. 1995. "Shape-memory Alloy Isolators for Vibration Suppression in Space Applications," In: 36th AIAA/ASME/ASCE/AS/ ASC Structures, Structural Dynamics, and Materials Conf., pp. 3390-3398.